Showing 721–736 of 2131 results
-
REQUEST A QUOTE
- Working Fluid: Compressed Air
- Set Pressure Range: 0.1 to 0.8 MPa (1.0 to 8.0 bar)
- Max Operating Pressure: 1.0 MPa (9.9 kgf/cm²)
- Repeatability: Within ±0.02 MPa
- Air Piping Port: Rc 1/4
- Electrical Conduit Port: G 1/2
- Electrical Interface: 100/200 VAC with Indicator Lamp
- Switch Operation Method: Mechanical On/Off
- System Pressure Interlocks: Halting downstream factory automation sequences if lines plunge below safe pneumatic operational values.
- Compressor Control Cycles: Serving as the direct primary loop mechanical cut-in or cut-out switch across manufacturing environments.
CKD APE-8T-3N Mechanical Pressure Switch (APE Series).
-
- Manufacturer: CKD
- Model / Part Number: F3000-10-W-F
- Filtration Rating: 5 μm (micrometer) element for effective dust and foreign matter removal.
- Port Size: 3/8 inch with standard Rc thread connection.
- Operating Pressure: Maximum working pressure of 1 MPa (approx. 145 PSI).
- Fluid Temperature: Safe operating range between 5°C to 60°C (11°F to 140°F).
- Bowl Material: Durable polycarbonate bowl.
- Flow Direction: Standard left-to-right direction.
- Filter Element: F3000-ELEMENT
- Mounting Bracket: B320 (C-type bracket)
-
- Manufacturer: CKD
- Model / Part Number: F3000-10-W-FX1
- Filtration Rating: 5 microns (μm) to catch tiny dust and rust particles.
- Bowl Material: Clear polycarbonate plastic, making it easy to visually inspect fluid levels.
- Max Working Pressure: 1.0 MPa (about 145 PSI).
- Temperature Range: 5°C to 60°C (41°F to 140°F).
- Long-Life Element: Uses a special chemical fiber structure that resists clogging better than standard elements.
-
REQUEST A QUOTE
- Metric Attribute: Specification (Metric)
- Port Size: Rc 1/4
- Filtration Rating: 5 μm (Microns)
- Max Working Pressure: 1.0 MPa
- Proof Pressure: 1.5 MPa
- Fluid Temperature Range: 5°C to 60°C
- Total Unit Length: 170.5 mm
- Bowl Material: Polycarbonate
- Graduated Matrix Element: Features CKD's proprietary chemical fiber filter structure. The media transitions from a coarse texture on the surface to a fine density toward the core. This depth-filtration design minimizes surface clogging, significantly extending the lifespan of the element compared to surface-only alternatives.
- Polycarbonate Bowl Guard: Outfitted with a transparent polycarbonate bowl enabling a 360° visual check of accumulated condensation levels, shrouded by an impact-resistant structural guard for industrial environment protection.
CKD F3000-8-W-F Pneumatic Air Filter (F-W Series).
-
- Manufacturer: CKD
- Model / Part Number: R1000-8G-W-NT
- Working Fluid: Compressed air
- Port Size: G 1/4
- Set Pressure Range: 0.05 to 0.85 MPa (~7.3 to 123 psi)
- Maximum Working Pressure: 1.0 MPa (~150 psi)
- Proof Pressure: 1.5 MPa (~220 psi)
- Fluid & Ambient Temperature: 5°C to 60°C (41°F to 140°F)
-
REQUEST A QUOTE
- Screen Size: 12.1 inches (diagonal)
- Native Resolution: 800 × 600 SVGA
- Aspect Ratio: 4:3
- Display Mode: MVA, Normally Black, Transmissive
- Brightness (Luminance): 450 cd/m² (Typical) (Upgradable via aftermarket kits to 1300+ nits)
- Contrast Ratio: 700:1 (Typical)
- Signal Interface: LVDS (1 channel, 6-bit / 8-bit), 20-pin connector
- Backlight Type: WLED (White LED) with built-in LED Driver; 50,000-hour lifecycle
- Viewing Angle: 80°/80°/70°/70° (Left/Right/Up/Down)
- Operating Temperature: -20°C to 70°C (-4°F to 158°F)
CMI G121S1-L02 TFT-LCD Display Module (G121S1 Series).
-
REQUEST A QUOTE
- Flow Capacity: 30 L/min
- Maximum Pressure: 55 kgf/cm² (approx. 5.5 MPa / 800 psi)
- Shaft Diameter: 19 mm
- Mounting Setup: 4 Bolt holes / Hole-to-hole spacing: 90 mm / Lip size: 95.02 mm
- Port Sizes: Inlet: 3/4″ PT | Outlet: 1/2″ PT | Drain: 1/4″ PT
- Energy Efficiency: The variable vane design automatically adjusts displacement based on system demands, avoiding rapid oil temperature spikes and lowering power draw.
- Modular Integration: It is engineered to share a single motor with an external gear pump series (such as the EGA series), drastically saving physical workspace and motor costs.
- Primary Uses: Frequently installed in dedicated hydraulic machinery, cooling circulation pump systems, and compression molding machines.
CML VCM-SF-30C-20 Variable Displacement Vane Pump (VCM Series).
-
REQUEST A QUOTE
- Manufacturer / MPN: Cognex Corporation / CCB-PWRIO-05 (Alt PN: 185-1196R)
- Length: 5 meters / 16.4 feet
- Voltage Rating: 24 VDC
- Connector Type: Straight M12 12-Pin (Female) to Bare End Flying Leads
- Ingress Protection: IP67 rated (dust-tight and water-resistant)
- Material / Jacket: PVC jacket, Flame retardant, Silicone-free, Oil resistant
- Flexibility / Lifecycle: Torsion rated for >500,000 twists; >2 million operational cycles
- Operating Temp: -40°C to +105°C (-40°F to +221°F)
- Cable Construction: 3 shielded pairs + additional single conductors
- In-Sight Vision Sensors: In-Sight 2000, 2800, SnAPP, 7000, and 9000 series.
COGNEX CCB-PWRIO-05 Power and I/O Breakout Cable (CCB Series).
-
REQUEST A QUOTE
- Manufacturer: Cognex
- Model / Part Number: DMR-262-EV-W-DM262QX
- Image Resolution: 1280 × 960 pixels
- Code Types: 1D and 2D codes, including QR Code and Data Matrix
- Image Rate: 45 frames per second
- Decode Rate: Up to 45 decodes per second
- Communication: Ethernet
- Protection Rating: IP65
Cognex DMR-262-EV-W-DM262QX Scanner. Contact us for product information and quotation.
-
REQUEST A QUOTE
- Manufacturer: Cognex
- Model / Part Number: DMR-363X-1000
- Reader family: DataMan 363X
- Imager resolution: 1600 × 1200 pixels
- Sensor type: CMOS
- Supply: 24 V DC, ±10%
- Ethernet: 10BASE-T / 100BASE-TX
- Serial interface: RS-232
- Operating temperature: 0 to +40 °C
- Humidity: <95% RH, non-condensing
- Protection: IP65 with specified covers and cable seals installed
-
REQUEST A QUOTE
- Resolution & Sensor: 2 MP (1600 x 1200 pixels) UXGA resolution utilizing a 1/1.8" CMOS monochrome sensor with a global shutter.
- Performance: Capable of capturing images at speeds up to 53 frames per second (fps).
- Vision Software: Embedded with Cognex's proprietary PatMax geometric pattern matching software for precise part location.
- Form Factor: Extremely slim profile measuring just 31mm x 31.2mm x 75.1mm inside a die-cast zinc housing.
- Lens Mount: Standard C-mount.
- Memory: 512 MB non-volatile flash memory and 512 MB SDRAM.
- Connectivity & Power: 1x digital isolated trigger input, 2x digital outputs, and a Gigabit Ethernet (GigE) port supporting 48VDC Power over Ethernet (PoE Class 2).
- Protection Rating: IP40 certified.
Cognex IS8402M-363-50 Industrial Vision Camera (In-Sight 8000 Series).
-
REQUEST A QUOTE
- System Compatibility: Fully compatible with Salwico fire alarm systems including the CS3000, CS4000, and TERRA FIRE platforms, among various maritime variants (Salwico Cargo, Cruise, LNG, Workboat, etc.).
- Addressing: The specific loop address is configured manually using an on-board DIP-switch.
- Visual Indicator: Features a prominent red LED on the front panel to signal an activated alarm or door indication status.
- Build & Design: Weighs approximately 160–170 grams, encased in a durable PC/ABS material designed with waterproof protection (WP) to resist moisture and vibrations.
Consilium IC10 WP 5200273-00A Fire Alarm Address Unit (IC10 Series).
-
REQUEST A QUOTE
- Sensor Type: Inductive Proximity
- Sensing Distance: 3 mm
- Output Configuration: PNP Normally Open (NO) with an integrated IO-Link interface
- Pressure Rating: Continuous operation up to 500 bar (approx. 7,250 psi), with a peak operational threshold spanning 500 to 1,000 bar max.
- Housing & Size: M14 threaded stainless steel body.
- Electrical Connection: M12 4-pin connector.
- Mounting Style: Flush / Embeddable.
- Supply Voltage: 10 to 30 V DC.
- Operating Temperature: -25°C to 100°C.
- Enclosure Rating: IP68.
CONTRINEX DW-AS-503-P20 Embeddable Inductive Proximity Sensor (DW-AS Series).
-
- Manufacturer: CONTRINEX
- Model / Part Number: DW-AS-513-M18-002
- Size: It has an 18mm diameter and a 63.5mm long body.
- Sensing Distance: It can sense metal objects up to 20mm away. This is considered a long "triple range" for an 18mm sensor.
- Mounting: It is non-flush, which means the tip of the sensor sticks out of the surrounding metal frame to look for objects sideways as well as forward.
- Electrical Output: It uses a PNP, Normally Open (N.O.) setup. This means it stays "off" until it detects metal, then it completes the circuit and sends a positive electrical signal to the machine.
- Connection: It plugs in using a standard 4-pin M12 quick-disconnect plug.
- Toughness: It is rated IP67, which means it is totally protected against dust and can handle being splashed or briefly submerged in water.
- Voltage: It runs on 10 to 30 Volts DC power.
-
REQUEST A QUOTE
- Housing Size: M8 × 1.0 Threaded Barrel
- Mounting Type: Flush / Embeddable
- Output Type: NPN, Normally Open (N.O.)
- Operating Voltage: 10 … 30 VDC
- Switching Frequency: 5,000 Hz (5 kHz)
- Output Current: Max. 200 mA
- Connection Type: 3-pin M8 Quick-Disconnect
- Housing Material: 304 Stainless Steel (V2A)
- Environmental Rating: IP67
- Built-in Protection: Short-circuit, Overvoltage, Reversal
CONTRINEX DW-AS-621-M8-001 Cylindrical Inductive Proximity Sensor (DW-AS Series).
-
REQUEST A QUOTE
- Sensor Type: Inductive Proximity / Magnetic Sensor
- Form Factor: Square Head with Connector System
- Operating Voltage: DC 10V to 30V (Highly recommended operating range)
- Current Consumption: ~110 mA typical
- Working Current: Max 0.2A
- Enclosure Rating: IP67 Fully Sealed (Oil-resistant, dustproof, waterproof)
- Response Time: High-speed millisecond response
- Certifications: CE Compliant
- Triple Circuit Protection: Built-in protection includes anti-reverse polarity wiring, anti-short circuiting, and over-current protection preventing early burn-out or damage from incorrect field-wiring.
- Industrial Ruggedness: Specifically designed to function reliably in high-vibration public transit infrastructure environment, providing strong electromagnetic anti-interference (EMI) shielding against machine stamping and heavy motor noise.
CONTRINEX ND40-SA-Q44S Square Inductive Proximity Switch (ND40 Series).
