Showing 1–16 of 24 results
-
REQUEST A QUOTE
- Manufacturer: Inovance Technology
- Series: AM400 Series
- Program Storage: 10 MB
- Data Storage: 20 MB
- Built-in Digital Inputs: 16 High-Speed Inputs
- Built-in Digital Outputs: 8 High-Speed Outputs
- Output Circuit Type: Sink (NPN Type)
- Motion Control Capacity: Supports up to 4 axes of synchronized control
- Weight: Approximately 0.27 kg (0.60 lbs)
- Integrated Communication Interfaces: Features a built-in Ethernet port for network programming, data acquisition, and upper-level SCADA/HMI communication, alongside embedded fieldbus capabilities.
INOVANCE AM401-CPU1608TN PLC CPU Module (AM400).
-
REQUEST A QUOTE
- TP: High-speed digital outputs are Source (PNP) type. (Note: "TN" signifies Sink/NPN).
- Manufacturer: Inovance Technology
- Motion Axis Control: Up to 4 axes via EtherCAT bus
- Built-in High Speed Inputs: 16 channels (Supports up to 8 AB-phase high-speed counters)
- Built-in High Speed Outputs: 8 channels (PNP / Source type; supports 4 groups of pulse positioning)
- Memory Architecture: 10 MB Data Storage Space / 20 MB Program Storage Space / 512 KB Retain Space
- Programming Environment: CODESYS V3 platform executed via Inovance InoProShop software
- Local Expansion: Supports up to 16 local I/O modules on the main rack (GL10/GR10 series)
- Physical Weight: Approximately 0.27 kg (0.60 lbs)
- USB Port: Mini-USB interface used for local PC connection, program downloading, and diagnostic tracking.
INOVANCE AM401-CPU1608TP PLC CPU Module (AM400).
-
REQUEST A QUOTE
Technical Specifications
- Specification Attribute: Details & Metrics
- Manufacturer: Suzhou Inovance (Guangdong, China)
- Controller Platform: AM400 Series Motion Controller / PLC
- Power Supply Requirements: 24V DC
- Built-in Digital Inputs: 16 High-Speed Inputs (Sink/NPN type, up to 202 kHz)
- Built-in Digital Outputs: 8 High-Speed Transistor Outputs (Drain/NPN type, up to 202 kHz)
- Motion Axis Capacity: Supports up to 8 Axes via bus synchronization
- Net Weight: ≈ 0.27 kg to 0.48 kg (standalone); 0.85 kg (packaged assembly)
INOVANCE AM402-CPU1608TN PLC CPU Module (AM400).
-
REQUEST A QUOTE
- Specification Attribute: Details & Capabilities
- Manufacturer: Inovance Technology
- Core Controller Platform: Codesys (IEC 61131-3 standard programming)
- Motion Axis Support: 8 Axes controlled via EtherCAT master
- Digital Inputs (DI): 16 High-Speed Inputs
- Digital Outputs (DO): 8 High-Speed Outputs
- Output Transistor Type: Source (PNP) type
- Physical Weight: 0.27 kg (approx. 0.6 lbs)
INOVANCE AM402-CPU1608TP PLC CPU Module (AM400).
-
REQUEST A QUOTE
- Manufacturer: Inovance Technology
- Model Number: AM403-CPU1608TN
- Device Type: PLC Main CPU / Motion Controller Module
- Input Channels: 16 digital input points
- Output Channels: 8 digital output points
- Output Type: NPN transistor
- Operating Voltage: 24 VDC
- Current Rating: 1.0 A
- Safety & Installation: Vital structural safety precautions, terminal layout diagrams, and wiring safeguards tailored for the NPN transistor output architecture.
- Interfaces & Connectivity: Complete mapping of the external communication interfaces and step-by-step procedures for establishing programming tool connections.
INOVANCE AM403-CPU1608TN PLC CPU Module (AM400).
-
REQUEST A QUOTE
- Series: Inovance AM400 Motion Controller
- Model: AM403-CPU1608TP
- Motion Axis Support: Up to 16 physical axes via EtherCAT / pulse
- High-Speed Digital Inputs: 16 channels (Optimized for encoders, high-speed registration)
- High-Speed Digital Outputs: 8 channels
- Output Transistor Type: Source (PNP) type (Note: The "TN" variant signifies NPN Sink)
- Communication Protocols: EtherCAT, CANopen, Modbus TCP, Modbus RTU, Ethernet
- Physical Weight: ~0.27 kg
- Advanced Motion Control: Seamlessly coordinates multi-axis movement using a dedicated EtherCAT master port, allowing for synchronous control of servo drives, electronic cams, and complex interpolation.
- Rich Connectivity: The built-in Ethernet interface allows integration into factory local area networks for SCADA/HMI interaction via Modbus TCP.
INOVANCE AM403-CPU1608TP PLC CPU Module (AM400).
-
REQUEST A QUOTE
- Processor Architecture: Built on a multi-core CPU architecture designed to process motion control calculations and PLC logic simultaneously.
- Digital Inputs: 8 digital inputs supporting high-speed configurations (up to 200 kHz) for reading encoder and pulse feedback.
- Digital Outputs: 8 transistor outputs (Transistor NPN type denoted by "TN").
- Motion Axes Control: Supports up to 8 synchronized EtherCAT axes for complex path movements like linear and circular interpolation or electronic CAM profiles.
- Network Capacities: Features a real-time EtherCAT master port capable of controlling up to 127 network slaves.
- Ethernet Communication: Dual integrated Ethernet ports supporting standard industrial protocols and programming interfaces.
- Local I/O Expansion: Compatible with up to 16 GL20 local expansion modules directly attached to the controller rack.
- Remote I/O Expansion: I/O can be expanded further across decentralized setups using the EtherCAT bus coupler GL20-RTU-ECT.
- Alternative Axis Options: Offers up to 4 pulse axes and supports an optional card configuration for up to 30 CANopen axes doing point-to-point (PTP) movements.
INOVANCE AM521-0808TN PLC Motion Controller (AM500 Series).
-
- Brand: Inovance
- Model: AM600-3200END
- Series: AM600
- Input channels: 32, arranged in 4 groups of 8
- Rated input voltage: 24 V DC
- Maximum input voltage: 30 V DC
- Input type: Source or sink
- Input connector: 40-pin
- Input impedance: 5.6 kΩ
- Typical input current: 4 mA
- ON threshold: Above 19 V
- OFF threshold: Below 5 V
- Hardware input filter: 10 ms
- Isolation: Optocoupler
- Internal supply consumption: 65 mA typical at 5 V
- Hot swapping: Not supported
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FS1R6I
- Product Series: IS620F Series (Industrial Profinet Network variant)
- Current Rating: 1.6 Amps (S1R6 designation)
- Compatible Motor Power: Optimized primarily for 200W servo motors
- Communication Interface: Profinet Industrial Ethernet
- Feedback System: Supports Inovance high-resolution absolute encoders
- High Bandwidth: Features a 1.2 kHz speed loop bandwidth for lightning-fast dynamic responses.
- Vibration Suppression: Equipped with an adaptive notch filter and built-in mechanical damping filters to cancel out low-frequency resonance.
- Diagnostic Data: Stores up to 30 historical fault codes to help engineers monitor the drive's health and predict component lifetimes.
- I/O Connections: The CN1 terminal handles reference input/output and safety signals, while the CN2 terminal links directly to the motor encoder.
- Dedicated Hardware Cable: For direct physical debugging or downloading parameters, the drive utilizes the Inovance S6N-L-T00-3.0 USB Debugging Cable.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FS1R6I-RT
- Control Capabilities: Features a 1.2 kHz speed loop bandwidth. This means it can react and adjust its speed very quickly (in milliseconds) to keep machines running smoothly.
- Supported Motors: Works flawlessly with Inovance MS1 high-response servo motors equipped with 23-bit high-resolution encoders for extreme precision.
- PC Software: You can fine-tune this drive on your computer using the InoServoShop software tool.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FS5R5I-RT
- Series Type: IS620F Series (PROFINET Bus Type)
- Model Code: IS620FS5R5I-RT
- Rated Output Power: 750 W (0.75 kW)
- Rated Output Current: 5.5 A
- Input Voltage: Single-Phase / Three-Phase 220 VAC
- Communication Interface: PROFINET Industrial Ethernet bus architecture
- Matching Motors: Optimized for MS1 series AC servo motors
- Frequency Response: Speed loop bandwidth up to 1.2 kHz
- RT: Fast real-time control variant optimization code.
- PC Commissioning Software: Fine-tuning and parameter handling are managed through the InoServoShop Windows application.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FT3R5I
- Power Output: 1.0 kW (Kilowatt)
- Input Voltage: Three-phase 380V to 440V AC (+10% to -15%), 50/60 Hz
- Rated Current: 3.5 A
- Maximum Peak Current: 8.5 A
- Resonance Suppression: Built-in adaptive notch filters and damping filters automatically eliminate mechanical vibration.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FT5R4I
- Rated Power: 1.5 kW
- Rated Output Current: 5.4 A
- Peak Current: 14.0 A
- Input: Three-phase 380–440 VAC, 50/60 Hz
- Output: Three-phase 0–380 VAC, 0–400 Hz
- Communication Interfaces: Dual Ethernet ports
- Encoder Backup Battery: 3.6 V, model 58-C4
- Compliance: CE
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FT5R4I-RT
- Rated Power: 1.5 kW
- Input Voltage: Three-phase 380–440 VAC
- Rated Current: 5.4 A
- Peak Current: 14.0 A
- Output Frequency: 0–400 Hz
- Communication: Dual Ethernet ports
- Encoder Backup Battery: 3.6 V, model 58-C4
- Compliance: CE
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FT8R4I
- Power Capacity: 2.0 kW (kilowatts).
- Rated Current: 8.4 Amps (indicated by the T8R4 in the model code).
- Maximum Current: 20.0 Amps peak.
- Input Voltage: Three-phase 380V to 440V AC.
- Product Series: IS620 series.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620NS7R6I
- Device Type: AC servo drive
- Rated Power: 1 kW
- Output Current: 7.6 A
- Input Voltage: 200 to 240 VAC
- Communication: EtherCAT
