Showing 1–16 of 77 results
-
REQUEST A QUOTE
- Cable Outlet: 90° vertical angled outlet, suitable for FastConnect stripping tools.
- Interface Types: One 9-pin Sub-D connector for the station, plus one integrated 9-pin Sub-D PG connection socket to hook up programming devices or extra nodes.
- Transmission Speed: Supports transmission rates up to 12 Mbps.
- Terminating Resistor: Integrated resistor combination, switchable using an accessible slide switch.
- Housing: Metalized shell to improve Electro-Magnetic Compatibility (EMC).
- Physical Profile: Dimensions of 40 x 17 x 64 mm and weighs approximately 40 g.
- Environmental Range: Built to operate across temperatures from -25 °C up to +85 °C with an IP20 protection level.
- Orange LED: On when the terminating resistor is actively switched into the circuit.
- Green LED: Indicates that bus activity is present (the network is actively transferring data).
- Blue LED: Confirms that the addressed station is successfully participating in the bus traffic.
700-972-7BB12 Helmholz PROFIBUS DP Connector.
-
- Brand: ABB
- Model: FSCA-01
- Series: F-Series Fieldbus Adapter
- Network interface: RS-485
- Protocol: Modbus RTU
- Function: Connects ABB drives to a serial fieldbus
- Supported functions: Single and multiple Modbus register read/write functions
- Compatible drives: ACS580, ACH580, ACQ580, ACS880, DCS880 and DCT880
- Typical profile: ABB Drives Enhanced profile supported
-
- Manufacturer: ABB
- Model / Part Number: NPBA-12
- Product Part Number: 64348221 (or alternate manufacturing IDs like 64248677)
- Network Protocol: PROFIBUS DP
- Data Transfer Speed: Up to 12 Mbps
- Power Requirement: 24V DC (Draws about 70 mA)
- Degree of Protection: IP20 (Safe to touch, but not waterproof)
- Mounting: Snaps onto a standard DIN rail
-
REQUEST A QUOTE
- Data Transfer Rate: Over 1.15 MB/s
- PC Interface: USB 2.0 (USB 1.1 compatible)
- Instrument Interface: IEEE-488
- Device Capacity: Up to 14 GPIB instruments
- Powering: USB bus-powered, no external power supply required
- Parallel Polling: Check response of up to 8 devices in one poll
Agilent 82357B USB/GPIB USB to GPIB Interface Converter (82357 Series).
-
REQUEST A QUOTE
- Network Type: EtherNet/IP Adapter Module
- Input Voltage: 24V DC nominal (Range: 10–28V DC)
- Termination Type: M12 Quick-Disconnect
- Enclosure Rating: IP65, IP66, IP67, and IP69K (Sealed Housing when marked)
- Max Power Consumption: 8.1 W @ 28.8V DC (Backplane: 4.5 W @ 24V DC)
- Max Power Dissipation: 2.8 W @ 28.8V DC
- Dimensions: 4.41 x 2.83 x 2.56 in (112 x 72 x 65 mm)
- Weight: ~0.80 lbs (0.36 kg)
- Enclosureless Design: Features a heavily sealed, impact-resistant housing that meets IP67/IP69K standards, allowing direct machine mounting and eliminating the cost of electrical panels.
- Quick-Disconnect Fittings: Employs industry-standard M12 connectors for network and power inputs, lowering wiring labor costs and reducing point-of-failure exposure.
ALLEN-BRADLEY 1738-AENT EtherNet/IP Adapter (ArmorPOINT).
-
REQUEST A QUOTE
- Product Line: Micro850® (Enhanced Version)
- Total Embedded I/O: 24 Points (14 Inputs, 10 Outputs)
- Digital Inputs: 14 inputs, 24V AC/DC
- Digital Outputs: 10 outputs, Relay type
- Input Power Supply: 24V DC (Operating range: 20.4–26.4V DC)
- Power Consumption: 28 Watts
- High-Speed Counters (HSC): 4 Channels (100 kHz support)
- Enclosure / Environmental: IP20 Standard (Indoor industrial use)
- Mounting Options: DIN Rail or Panel Mount
- Terminal Screw Torque: 0.6 Nm
ALLEN-BRADLEY 2080-L50E-24QWB Programmable Logic Controller (PLC) (Micro850).
-
REQUEST A QUOTE
- Manufacturer: B&R
- Model / Part Number: 3IF786.9
- Module Type: Advanced PCI (aPCI) slot-mounted communication card
- Power Consumption: 2.5 W total (2.0 W at 3.3 V and 0.5 W at 5 V)
- Protection Rating: IP20
B&R 3IF786.9 Communication Card. Contact us for product information and quotation.
-
REQUEST A QUOTE
- Interface Types: 1x RS-232 / RS-422 / RS-485 interface.
- Automatic Switching: The operating mode adjusts automatically depending on the electrical connection.
- Connector Type: 9-pin D-Sub male connector.
- Operating Temperature: Rated for 0°C to +55°C ambient environments.
- Approvals: cULus HazLoc approved for hazardous locations.
- Automation Studio: Requires minimum version V3.0.90 or V4.0.16 to operate.
- Hypervisor Support: Fully supports the B&R Hypervisor starting with Automation Studio V4.4.
B&R 5AC901.I485-00 Communication Interface Card (APC).
-
REQUEST A QUOTE
- Model Number: 5AC901.IHDA-00
- Primary Function: Audio Interface Option Card
- Sound Chip: High Definition Audio (HDA) chip
- Power Consumption: 0.4 W
- Audio Interfaces: • 1x Microphone Input (MIC)
- Connection Accessibility: Externally accessible audio channels
- Automation PC Series: Compatible with APC910, APC3x00, and APC4100.
- Panel PC Series: Compatible with PPC900, PPC3x00, Panel PC 3100, and Panel PC 3200.
B&R 5AC901.IHDA-00 Audio Interface Card (APC).
-
REQUEST A QUOTE
- Product Type: Interface Option Card / Communication Module
- Interfaces: 1x Ethernet POWERLINK interface (RJ45 connector)
- Network Speed: 100 Mbit/s
- Onboard Memory: 2 MB SRAM (Memory Capacity)
- Power Consumption: 1.5 W
- Operating Temperature: 0 to +55 °C
- Storage Temperature: -20 to +60 °C
- Hardware ID / Code: 0xE025 (57381)
- Certifications: CE, cULus (E115267), cULus HazLoc (E180196), DNV GL
- Automation PC Series: APC910, APC3100, APC3200, and APC4100
B&R 5AC901.IPLK-00 Communication Interface Card (APC).
-
REQUEST A QUOTE
- Primary Function: Memory interface option card
- Memory Capacity: 2 MB (2,032 kB available for user data; 16 kB reserved for Automation Runtime management)
- Memory Type: SRAM (Static Random-Access Memory)
- Power Consumption: 2 W
- Manufacturing Origin: Austria
- Official Data: View technical parameters on the official B&R 5AC901.ISRM-00 Product Page.
B&R 5AC901.ISRM-00 SRAM Memory Expansion Card (APC Series).
-
REQUEST A QUOTE
- Function: Serves as a UPS interface card for industrial computers, specifically the Automation PC 910 as well as compatible APC3100, APC3200, and APC4100 series.
- Battery Pairing: Used in conjunction with the external maintenance-free lead-acid battery unit 5AC901.BUPS-01 (24 VDC, 2.2 Ah capacity).
- Power Ratings: Draws a maximum power consumption of 25 W with a rated DC input current of 0.9 A.
- Operating Temperature: Rated for ambient environments spanning 0 to +55 °C.
- Certifications: Holds cULus HazLoc (Hazardous Locations), CE, and cULus E115267 safety standards.
B&R 5AC901.IUPS-01 UPS Interface Card (APC).
-
- Manufacturer: B&R
- Model / Part Number: 5AC901.LSD3-00
- Device Type: Industrial monitor and panel interface card
- Power Consumption: 4 W
- Data Capacity: 2 MB
- Operating Temperature: 0 to 55 °C
- Certifications: CE and cULus
-
REQUEST A QUOTE
- Primary Function: Link module / Graphic transmitter option
- Interfaces: 1 x DVI-D port / SDL interface
- B&R ID Code: 0xD853
- Power Consumption: 1 W
- Weight: Approx. 45 g
- Operating Temperature: 0 to +55 °C
- Storage Temperature: -20 to +60 °C
- Industrial Safety: CE, UKCA, cULus E115267 Industrial Control Equipment
- Marine Certifications: DNV GL, LR (ENV3), KR, ABS, BV (EC31B)
- Marine Environmental Ratings: Temperature Class B, Humidity Class B (up to 100%), Vibration Class A (0.7 g), EMC Class B (bridge and open deck)
B&R 5AC901.LSDL-00 Display Link Module (APC).
-
REQUEST A QUOTE
- Onboard Memory: Equipped with 512 kB nvSRAM (non-volatile SRAM) used for storing permanent or variables data.
- Hardware Compatibility: Fully compatible with B&R APC2100 / PPC2100 and APC2200 / PPC2200 series industrial PCs.
- Software Requirements: Supported starting with Automation Studio 4.1.4.x (with Automation Runtime J4.10) or Automation Studio 4.2.5.x (with Automation Runtime A4.25).
- Physical Connections: Typically features RJ45 network connectors and 10-pin terminal blocks.
- Environmental Ratings: Approved for ambient operating temperatures ranging from -20°C to +55°C and carries cULus HazLoc safety approvals.
B&R 5ACCIF01.FPCC-000 Communication Interface Card (APC).
-
REQUEST A QUOTE
- Primary Function: 1x SDL/DVI transmitter interface
- Compatibility: Specifically designed for B&R Automation PC 2100 (APC2100) and Automation PC 2200 (APC2200) systems.
- Interface Standards: Supports Smart Display Link (SDL) or standard DVI connections for linking an Automation Panel HMI.
- Power Consumption: Ultra-efficient 1 W.
- Operating Temperature: Storage and operational capabilities range across a stable -20…+60 °C environment.
- Certifications: CE, cULus HazLoc approved for hazardous environments, and DNV GL marine certified.
B&R 5ACCLI01.SDL0-000 Monitor Transmitter Card (APC).
