-
REQUEST A QUOTE
- Module Type: Analog Output Module
- IP Rating: IP20
- Connection Type: PUSH IN
- Wire Connections: 2-wire, 3-wire, or 4-wire technology per plug-in connector
- Galvanic Isolation: 500 V DC between the current paths
- Interface: u-remote system bus (Max transmission speed: 48 MBit/s)
- Supply Voltage: 24 V DC
- Number of Channels: 4 analog outputs
- Resolution: 16-bit
- Accuracy: ±0.05% FSR (Full Scale Range End Value)
WEIDMULLER 1315680000 Analog Output Module (u-remote).
-
REQUEST A QUOTE
- Model/Type: PRO ECO 72W 24V 3A
- Output Power: 72 W
- Rated Output Voltage: 24 VDC (Adjustable from 22 V to 28 V)
- Nominal Output Current: 3 A @ 55 °C
- Efficiency: 87%
- Mounting Type: DIN Rail (TS 35)
- Protection Features: Short-circuit proof, overload protection, overheating protection, reverse/inverse voltage protection
- Status Indicators: Tri-colored LED (Green, Yellow, Red)
- Dimensions: 125 mm Height × 34 mm Width × 100 mm Depth
- Lifecycle Note: Official manufacturer data indicates this specific part number is scheduled for phase-out/end of life, with the recommended drop-in replacement being the Weidmüller 3025560000 (PROeco II Series).
WEIDMULLER 1469470000 Power Supply (PRO ECO).
-
REQUEST A QUOTE
- Series & Model: Klippon® A Series, A2T 2.5 Weidmüller E-Shop
- Connection Type: PUSH IN (Spring connection) Weidmüller E-Shop
- Rated Voltage: 800 V (AC/DC) Gabby Electric
- Rated Current: 24 A (IEC) iAutomation
- Clamping Wire Range: 0.14 mm² to 2.5 mm² (up to 4 mm² solid core) Gabby Electric
- Wire Gauge Compatibility: #28 AWG to #12 AWG iAutomation
- Number of Levels / Clamps: 2 Decks / 4 Clamping points (2 per level) Gabby Electric
- Mounting Type: Snap-on TS 35 DIN Rail (5.1 mm block width) iAutomation
- Color: Dark Beige Gabby Electric
- End Plate Required: The open side of the final terminal block unit must be safely closed using a compatible end cover plate.
- Potentials: The top and bottom levels are not cross-connected internally, meaning they maintain two independent electrical paths.
- Factory Lead-Time: 8 Weeks.
Weidmuller 1547610000 A2T 2.5 Feed-Through Terminal Block (A2T Series).
-
REQUEST A QUOTE
- Input Type: PT100 / Ni100 (2-, 3-, or 4-wire configuration), resistors, and potentiometers
- Output Signal: Analogue DC signals of 0(4) to 20 mA or 0 to 10 V
- Configuration: Configured manually via onboard DIP switches
- Physical Housing: 17.5 mm width add-on housing designed for TS35 DIN rail mounting
- Connection Type: MNT Screw connection with a nominal cross-section of 2.5 mm²
- Protection Rating: IP20
- Official Alternative: Weidmüller recommends part number 1176030000 as the direct modern replacement.
WEIDMULLER 8560700000 RTD Isolating Transformer (WAS5).
