Showing 1–16 of 54 results
-
REQUEST A QUOTE
- Series: Han E® (Size 16B)
- Gender: Female / Socket
- Number of Contacts: 16 + PE (Protective Earth)
- Termination Type: Screw terminal (with wire protection)
- Current Rating: 16 A maximum
- Voltage Rating: 500 V (600 V under UL/CSA certifications)
- Wire Gauge Compatibility: 0.75 mm² to 2.5 mm² (AWG 18 to AWG 14)
- Mating Cycle Lifespan: 500 mating cycles
- Direct Male Counterpart: Han E 16 Pos. M Insert Screw (Part Number: 09 33 016 2601)
09330162701 Harting Han E Connector Insert (Female).
-
REQUEST A QUOTE
Technical Specifications
- Manufacturer: ABB Robotics
- Part Number (MPN): 3HAC064448-002
- Component Type: TPU / Teach Pendant / Teaching Device Cable
- Cable Length: 3 meters (9.84 feet)
- Primary Device Compatibility: ABB DSQC3060 FlexPendant / Teach Pendant
- Controller Compatibility: ABB OmniCore & Related Systems (e.g., DSQC3120 variant systems)
- Primary Applications: Robot programming, automotive manufacturing, and automated electronic assembly
- Stable Power & Communication: Built using heavily shielded, high-flex industrial materials that protect critical communication signals and continuous low-voltage power from factory floor Electro-Magnetic Interference (EMI).
- Plug-and-Play Installation: Designed with standard, ruggedized circular quick-connect interface pins, allowing maintenance technicians to swap out damaged cables quickly without advanced programming skills.
- Industrial Durability: Specifically engineered to tolerate typical mechanical stressors found in industrial environments, such as twisting, pulling, and minor abrasion.
ABB 3HAC064448-002 Teach Pendant Cable (OmniCore).
-
REQUEST A QUOTE
- Manufacturer: ABB (Asea Brown Boveri)
- Part Number (MPN): 3HAC2530-1
- Replaced Legacy ID: 3HAB2679-1
- Cable Length: 15 m (49.2 ft)
- Physical Weight: 1.46 kg (3.22 lbs)
- Dimensions: 150 mm × 60 mm (packaged net profile)
- Connector Configuration: One straight connector and one right-angle (bent) connector
- Application Compatibility: ABB IRC5, IRC5C controllers; industrial robot SMB encoder and signal track positioning.
- Standout Features: 15m shielded design specifically built to sustain the complex high-flex demands of robotic tracking systems.
- Compatibility Warning: When utilizing this product as a direct substitution, verify if your system originally specified the older part code 3HAB2679-1, as this newer line replaces it completely.
ABB 3HAC2530-1 Robot Signal & Control Cable (IRC5).
-
REQUEST A QUOTE
- Manufacturer Part Number: 3HAC9038-1
- Cable Type: R1.MP Power Control / Robot Body Signal Cable
- Length: 7 Meters
- Weight: ~0.38 kg (0.84 lbs)
- Operating Temperature Range: –10 °C to +50 °C (14 °F to 122 °F)
- Compatibility: ABB Industrial Robot Systems (including IRC5/IRC5C controller setups paired with IRB 1600 or IRB 2400 arms)
- Material Construction: Reinforced polymer insulation designed for high oil, chemical, and flexing resistance in demanding assembly environments.
- IAS Robot Supply: New Original
- Model Validation: Always check the explicit pinouts on your current R1.MP connector block before hot-swapping cables. Ensure your controller software registry matches the physical axis assignment.
- Bend Radius Safety: When routing through the cable track or floor conduit, maintain the manufacturer-specified dynamic bend radius to mitigate long-term structural strain and avoid unexpected signal loss.
ABB 3HAC9038-1 Robot Power Control Cable (IRC5).
-
REQUEST A QUOTE
- Feature / Metric: Specification
- Manufacturer & Brand: Allen-Bradley / Rockwell Automation
- PC-Side Interface: Universal Serial Bus (USB)
- Drive-Side Protocols: DPI (Drive Peripheral Interface), DSI (Drive Serial Interface), and SCANport
- Data Transfer Rates: DPI: 125/250 Kbps | DSI: 19.2 Kbps | SCANport: 125 Kbps
- Serial Communication: Full-Duplex RS-232 DF1 Protocol; 8 Data Bits, 1 Stop Bit, No Parity
- Electrical Draw: DPI: 130mA @ 12V DC | DSI: 170mA @ 5V DC
- Diagnostic Indicators: Integrated LED status lights tracking Transmit (TX) and Receive (RX) activity
- Operating Environment: 0°C to 50°C (32°F to 122°F); 5% to 95% non-condensing relative humidity
- DPI Port Connection: PowerFlex 7-Class drives (e.g., PowerFlex 70, 700) and PowerFlex 750-Series (e.g., PowerFlex 753, 755, 755TS).
ALLEN-BRADLEY 1203-USB USB Converter (SCANport).
-
- Manufacturer: Allen-Bradley
- Model / Part Number: 1769-CRR3
- Catalog Number: 1769-CRR3
- Cable Length: 1 meter (3.28 feet)
- Connection Type: Right-to-Right (Right side of one chassis to the right side of another)
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- System Expansion: Extends the 1769 communication bus beyond the physical limit of a single compact I/O bank or chassis.
- High-Speed Communication: Ensures stable and secure data routing between the main processor and secondary I/O module banks.
-
REQUEST A QUOTE
- Connectors: One high-density connector fanning out to eight individual RJ-45 male plugs.
- Design Feature: It features a slimmer housing assembly compared to the legacy CAB-HD8-ASYNC cable. This ultra-compact footprint is required to physically fit into the lower and middle sockets of tightly spaced enterprise modules.
- Signaling: Supports independent asynchronous standard RS-232 serial data channels.
- Interface Modules: Supported on the NIM-24A (24-Port Asynchronous Network Interface Module) and SM-X-64A modules.
- Router Platforms: Used natively within the Cisco 4000 Series ISR architecture (such as the 4331, 4431, and 4451 routers).
Cisco CAB-ASYNC-8 = Octal Serial Cable (CAB Series).
-
- Manufacturer: CISCO
- Model / Part Number: CAB-CONSOLE-USB-C
- Product Type: Console management cable
- Connector A: USB-C
- Connector B: USB-C
- Cable Length: 1.8 m (6 ft)
- Color: Pantone Cool Grey
- Weight: Approximately 0.01 lb
-
REQUEST A QUOTE
- Manufacturer / MPN: Cognex Corporation / CCB-PWRIO-05 (Alt PN: 185-1196R)
- Length: 5 meters / 16.4 feet
- Voltage Rating: 24 VDC
- Connector Type: Straight M12 12-Pin (Female) to Bare End Flying Leads
- Ingress Protection: IP67 rated (dust-tight and water-resistant)
- Material / Jacket: PVC jacket, Flame retardant, Silicone-free, Oil resistant
- Flexibility / Lifecycle: Torsion rated for >500,000 twists; >2 million operational cycles
- Operating Temp: -40°C to +105°C (-40°F to +221°F)
- Cable Construction: 3 shielded pairs + additional single conductors
- In-Sight Vision Sensors: In-Sight 2000, 2800, SnAPP, 7000, and 9000 series.
COGNEX CCB-PWRIO-05 Power and I/O Breakout Cable (CCB Series).
-
REQUEST A QUOTE
- Manufacturer: Delta Electronics / Industrial Automation
- Model Number: ASD-BM-50A
- Component Type: CN1 I/O Signal Breakout Board / Terminal Board with Cable
- Interface Connector: 50-Pin CN1 Connector (SCSI-style high-density plug)
- Terminal Type: Standard Screw Terminal Block
- Environmental Status: RoHS3 Compliant, REACH Unaffected
- Export Classifications: ECCN: EAR99 | HTSUS: 8536.90.4000
- Part Number Aliases: 2039-ASD-BM-50A, ASD-BM-50A-ND
- Compatible Servo Drive Series: Delta ASDA-A, ASDA-A+, ASDA-AB, ASDA-B, and ASDA-A2 Series.
- Associated Drive Example: Commonly paired with drives such as the ASD-A2-0221-M (Servo AC 220VAC Supply modules).
DELTA ASD-BM-50A Breakout Terminal Block (ASDA).
-
- Brand: Delta
- Model: UC-PRG020-12A
- Series: Delta PLC Programming Cables
- Cable function: PC-to-PLC programming and serial communication
- PC interface: USB
- Device interface 1: DB9 female
- Device interface 2: 8-pin mini-DIN male
- Communication standard: RS-232
- Cable length: 2 m
- Compatible product families: Delta DVP slim PLC and AH500 PLC families
-
REQUEST A QUOTE
- Connector Type: 12-Pin End-Effector (EE) Cable Connector
- Form Factor: Right-Angle / 90-Degree Elbow (Ideal for minimizing cable stress and ensuring streamlined wiring layout in dense configurations)
- Termination Type: Solder-type pins
- Weight: Approximately 0.1 kg to 0.15 lbs (approx. 45-68 grams)
- Component Composition: Includes integrated cable clamp for heavy-duty industrial strain relief.
- Pin Signal: Description
FANUC A05B-1137-J058 End-Effector Connector (LR Mate).
-
REQUEST A QUOTE
- Part Number: A660-2004-T411
- Length: 10 Meters (10M)
- Connector Type: 20-pin MR-style male connector to the pendant interface
- Cable Properties: Shielded (to protect against electrical noise/interference), oil-resistant, dust-resistant, and built for heavy handling in high-flex factory environments.
- Compatible Controllers: R-J3 and R-J3iB
- Common Robot Models: Arc Mate 100i, Arc Mate 120i, M-6i, M-16i, M-710i, R-2000i, S-420i, and LR Mate 100i.
- Details: Includes a 30-day return policy and standard factory testing.
- Details: Guarantees OEM-spec industrial shielding and exact 20-pin alignment.
FANUC A660-2004-T411 10M Teach Pendant Cable (A660 Series).
-
- Manufacturer: Festo
- Model / Part Number: NPQH-T-Q6-E-P10 578381
- Design: T-shaped push-in connector, full-metal electroless nickel-plated brass
- Pneumatic connection: For tubing with 6 mm outside diameter
- Working pressure: -0.95 to 20 bar
- Ambient temperature: 0 to 150 deg C
- Nominal width: 5 mm
- Order code: 578381
-
REQUEST A QUOTE
- Pneumatic Connection: G 1/8 thread
- Operating Pressure Range: 0 to 8 bar (0 to ~116 PSI)
- Switching Element Function: Changeover switch (SPDT – Single Pole Double Throw)
- Maximum Switching Frequency: 1 Hz
- Operating Voltage Range: 12 V to 250 V AC / 12 V to 250 V DC
- Current Ratings: 6 A at 250 V AC (Resistive / Ohmsche Last)
- Operating Medium: Compressed air conforming to ISO 8573-1:2010 [7:4:4] (Lubricated or unlubricated)
- Ambient / Media Temperature: 0°C to 60°C (32°F to 140°F)
- Mounting Position: Any
FESTO PE-1 8-1N 6217 Pressure Switch (PE Series).
-
REQUEST A QUOTE
- Manufacturer & Series: Festo, PE Series
- Part Number / Alias: 6484 (Equivalent to PE1/81NSW)
- Pneumatic Connection: G1/8" (1/8" BSPP) threaded female port
- Sensing / Operating Range: 0 to 8 bar (0 to 0.8 MPa)
- Switch-On Point: Fixed at 2.0 bar
- Switch-Off Point: Fixed at 0.5 bar
- Electrical Output Type: 1 x Digital Output (Changeover SPDT contact)
- Voltage Range: AC/DC 12 V to 250 V (Supports 24V, 110V, 230V nom.)
- Electrical Connection: Pre-wired 0.5-meter (50cm) PVC 3-core cable with bare end flying leads
- Ingress Protection: IP67 certified
FESTO PE-1-8-1N-SW 6484 Pressure Switch (PE Series).
