Showing 705–720 of 2131 results
-
- Manufacturer: CHIMEI
- Model / Part Number: ZJ090NA-03B
- Screen Size: 9.0 inches (measured diagonally)
- Resolution: 800 × 480 pixels (WVGA format)
- Display Type: a-Si TFT-LCD, active matrix
- Display Mode: TN (Twisted Nematic), Normally White, Transmissive
- Brightness: 500 cd/m² (nits), providing good clarity under indoor lighting
- Contrast Ratio: 500:1
-
- Manufacturer: CHINT
- Model / Part Number: DZ267LE-32 1P+N C32
- Poles: 1P + N (1 Phase + Neutral in a compact space)
- Tripping Curve: Type C (trips instantly at 5 to 10 times the rated current, ideal for standard household and commercial lighting/motor loads)
- Frequency: 50 Hz
- Mounting Type: 35mm DIN Rail
- Width: 36mm total module size
-
REQUEST A QUOTE
- Manufacturer: CHINT Global
- Model Number: NC1-5011
- Coil Voltage: 220V – 240V AC (50/60 Hz)
- Number of Main Poles: 3 Poles (3P)
- Auxiliary Contacts: 1 NO + 1 NC
- Mounting Standard: 35mm DIN Rail / Screw Mount
- Standards Compliance: IEC/EN 60947-4-1
CHINT NC1-5011 220V AC Magnetic Contactor (NC1 Series).
-
REQUEST A QUOTE
- Main Poles: 3 Normally Open (3 NO)
- Auxiliary Contacts: 1 NO + 1 NC
- Rated Insulation Voltage: Up to 690 V
- Frequency Compatibility: 50 / 60 Hz
- Standard Compliance: IEC / EN 60947-4-1
- Motor Control: Directly switching three-phase AC motors up to 22 kW.
- Overload Protection: Combined with a matching thermal overload relay to create an electromagnetic starter that protects machinery from overcurrent failures.
- Automation Automation: Integrating with timers, PLCs, or float switches utilizing the 1NO/1NC auxiliary contacts for status feedback loops.
CHINT NC1-5011 3-Pole AC Magnetic Contactor (NC1 Series).
-
REQUEST A QUOTE
- Main Pole Configuration: 3 NO (Normally Open)
- Auxiliary Contacts: 1 NO + 1 NC
- Power Rating (P): 30 kW (approx. 40 HP)
- Rated Insulation Voltage: Up to 690 VAC
- Frequency Compatibility: 50 / 60 Hz
- Mounting Mechanism: DIN Rail or Screw Mount
- Compliance & Standards: IEC/EN 60947-4-1
- Motor Starters: Can be coupled with a CHINT NR2 Thermal Overload Relay to assemble an electromagnetic starter, protecting lines from over-current and phase loss.
- Automation: Interlocks cleanly with CHINT Pushbuttons, timers, and automated sensor systems.
CHINT NC1-6511 AC Magnetic Contactor (NC1 Series).
-
- Manufacturer: CHINT
- Model / Part Number: NXC-09 AC380V
- Model Number: NXC-09
- Coil Voltage: 380V AC (This is the electric signal needed to activate the internal magnet)
- Rated Current: 9 Amps (The maximum continuous current it can safely pass to a machine)
- Main Contacts: 3 Poles (3P) for switching 3-phase power lines
- Auxiliary Contacts: 1NO + 1NC built-in (One Normally Open and one Normally Closed circuit used for signals, indicator lights, or safety interlocks)
- Mounting Type: Standard 35mm DIN rail or direct screw mounting
-
- Manufacturer: CHINT
- Model / Part Number: NXC-18 220VAC
- Controlled Motor Power: Up to 7.5 kW at 380V/400V.
- Control Coil Voltage: 220 VAC (Operating at 50/60 Hz frequency).
- Main Contacts Configuration: 3 NO (3 Normally Open poles).
- Integrated Auxiliary Contacts: 1 NO + 1 NC (1 Normally Open and 1 Normally Closed).
- Ambient Air Temperature: Safe for operation between -35°C to +70°C.
- Mechanical Lifetime: Tested up to 12,000,000 cycles.
-
REQUEST A QUOTE
- Manufacturer: CHINT Electric
- Series / Model: NXM Series / NXM-400S/3300 400A
- Number of Poles: 3P (3 Poles / 3 Phases)
- Frame Size (AF): 400 AF
- Trip Unit Technology: Fixed Thermal-Magnetic Sensor (Overload & Short-Circuit protection)
- Ingress Protection Rating: IP20
- Compliance Standard: IEC 60947-2
- Durable & Compact Architecture: Molded-case framing ensures space efficiency within dense electrical panels, high structural durability, and the capability to withstand severe environmental stress.
- Dual Protection Mechanism: Employs precise thermal elements to handle prolonged current overloads and instantaneous magnetic elements to snap open under catastrophic short-circuit spikes.
- Motor Protection Capability: Beyond standard circuit infrastructure, it is optimized to accommodate and protect non-frequent starting behaviors typical of industrial electric motors.
CHINT NXM-400S-3300 400A Moulded Case Circuit Breaker (NXM Series).
-
REQUEST A QUOTE
- PoE Standards: Compliant with IEEE 802.3at (PoE+) up to 30W; backward compatible with IEEE 802.3af (15.4W).
- Output Power: Max 30 Watts at 55 V DC.
- PoE Polarity: Pin assignments: 4/5 (+), 7/8 (-).
- Data Throughput: Supports 10/100/1000 Mbps Gigabit Ethernet.
- Input Voltage: AC 100 to 240 V universal input.
- Input Frequency: 50 Hz to 60 Hz (49 Hz to 60 Hz tolerance range).
- Input Current: 0.67 A @ 100 – 240 V AC.
- Interface Ports: Dual Shielded RJ-45 ports (Data In / Data + Power Out), conforming to EIA 568A and 568B.
- Physical Dimensions: 53 mm x 32.5 mm x 140 mm (2.09 in x 1.28 in x 5.5 in).
- Weight: 200 g (0.44 lbs).
CISCO AIR-PWRINJ6 Power over Ethernet Injector (AIR-PWRINJ Series).
-
REQUEST A QUOTE
- Connectors: One high-density connector fanning out to eight individual RJ-45 male plugs.
- Design Feature: It features a slimmer housing assembly compared to the legacy CAB-HD8-ASYNC cable. This ultra-compact footprint is required to physically fit into the lower and middle sockets of tightly spaced enterprise modules.
- Signaling: Supports independent asynchronous standard RS-232 serial data channels.
- Interface Modules: Supported on the NIM-24A (24-Port Asynchronous Network Interface Module) and SM-X-64A modules.
- Router Platforms: Used natively within the Cisco 4000 Series ISR architecture (such as the 4331, 4431, and 4451 routers).
Cisco CAB-ASYNC-8 = Octal Serial Cable (CAB Series).
-
- Manufacturer: CISCO
- Model / Part Number: CAB-CONSOLE-USB-C
- Product Type: Console management cable
- Connector A: USB-C
- Connector B: USB-C
- Cable Length: 1.8 m (6 ft)
- Color: Pantone Cool Grey
- Weight: Approximately 0.01 lb
-
REQUEST A QUOTE
- Cable Length: 0.5 meters / 50 cm (~1.64 feet). Highly optimized for short-distance connections to eliminate rack/wiring closet clutter.
- Conductor & Architecture: High-speed copper core with male-to-male, shielded metal connectors and snap fasteners for maximum data integrity against EMI.
- Switch Series: Required Stacking Module
CISCO CAB-STK-E-0.5M Switch Stacking Cable (FlexStack Series).
-
REQUEST A QUOTE
- Form Factor: Plug-in SFP+ Transceiver Module
- Data Transfer Rate: 10 Gbps (10 Gigabit Ethernet)
- Cabling / Fiber Type: Duplex Single-Mode Fiber (SMF / OS2)
- Wavelength: 1550 nm
- Max Cable Distance: 40 km (24.9 miles)
- Connector Type: LC Duplex
- Optical Components: 1550nm EML Transmitter / PIN Receiver
- TX Power Range: -4.7 to 4 dBm (or -1 to 4 dBm depending on OEM build)
- Receiver Sensitivity: -15.8 dBm to -17 dBm
- Optical Link Budget: ~11 to 12 dB
CISCO SFP-10G-ER SFP+ Optical Transceiver (SFP-10G Series).
-
REQUEST A QUOTE
- Valve Series: 4F0
- Actuation Type: 20 (Double Solenoid)
- Port Size: 06
- Number of Ports: 5-Port
- Working Fluid: Compressed Air
- Max Pressure: 1.0 MPa
- Operating Temp: -10°C to 60°C
CKD 4F020-06 Pilot-Operated Pneumatic Solenoid Valve (4F Series).
-
- Manufacturer: CKD
- Model / Part Number: 4F210-08-AC110V
- Valve Function: 5-Port, 2-Position (5/2 Way) single pilot.
- Primary Medium: Clean, compressed air.
- Body Material: High-grade aluminum spool and housing for corrosion resistance.
- Compatible Cylinder Sizes: Ideally drives pneumatic cylinder bores ranging from 16mm up to 100mm.
- Mounting Design: Body-ported configuration (fittings thread directly into the valve body).
-
- Manufacturer: CKD
- Model / Part Number: ADK11-20A-02ES-DC24V
- Actuation Type: Pilot-kick diaphragm drive
- Valve Type: Normally Closed (NC)
- Port Size: Rc 3/4
- Orifice Size: 23 mm (standard for 20A models)
- Working Pressure Range: 0 to 1.0 MPa (0 to ~10 bar)
- Ambient Temperature: -10°C to 60°C
