Showing 337–352 of 2086 results
-
REQUEST A QUOTE
- Encoder Compatibility: Dual-purpose support for Incremental encoders and SSI (Synchronous Serial Interface) / BiSS-C absolute encoders.
- Physical Connector: 15-pin female D-Sub interface.
- Operating Voltage & Supply: Configurable encoder supply voltage of 5 V (at 250 mA) or 15 V.
- Voltage Drop Compensation: Features an integrated auto-compensation mechanism for 5 V setups to negate transmission losses over long cable distances.
- Signal Monitoring: Actively monitors encoder input signals for failures, ensuring system safety by executing line-break and short-circuit diagnostics.
- Counter Depth & Frequency: 32-bit resolution tracking with an operating limit up to 200 kHz.
- Physical Metrics: Ultra-compact footprint weighing approximately 0.08 kg – 0.1 kg with an IP20 protection enclosure rating once securely slotted.
- Standout Feature: Available in brand-new factory condition.
B&R 8AC123.60-1 Encoder Interface Module (ACOPOS).
-
REQUEST A QUOTE
- Number of Axes: 2 axes (drives two motors independently)
- Rated Output Current: 1.9 A per axis
- Output Voltage: 3 x 0 to 480 V AC
- Output Frequency: 0 to 500 Hz (up to 598 Hz maximum)
- Control Supply: 24 VDC control voltage
- Safety Functions: Integrated safe stop and uncontrolled stop capabilities
- Expansion Slots: 2 plug-in slots for ACOPOSmulti modules (e.g., encoder or communication interfaces)
- Physical Mounting: Wall-mounted design with an IP20 protection rating
- Weight: Approximately 2.8 kg (6.17 lbs)
B&R 8BVI0014HWD0.000-1 ACOPOSmulti Inverter Module (ACOPOSmulti Series).
-
REQUEST A QUOTE
- Manufacturer: B&R Automation (by ABB)
- Part Number: 8BVI0440HCS0.000-1 (also listed as 8BVI0440HCS0000-1)
- Product Series: ACOPOSmulti (Single-Axis Inverter Module)
- Current Rating: 44 A max continuous output
- Voltage Supply: 3 × 400–480 Vac (Three-phase AC power input)
- Cooling / Mounting: Cold plate or pass-through/feed-through mounting
- Expansion Capability: 2 slots integrated for ACOPOSmulti plug-in modules
- Safety Functions: Integrated uncontrolled standstill and Safe Stop (STO)
- Built-in Interfaces: Dedicated connections for motor holding brake & temperature sensor
- Modular Multi-Axis Sync: Designed to attach to standard ACOPOSmulti backplane rails, sharing a common DC bus with power supply modules to regenerate and optimize energy efficiency.
B&R 8BVI0440HCS0.000-1 Inverter Module (ACOPOSmulti).
-
- Manufacturer: B&R
- Model / Part Number: 8LSA46.R2030D100-3
- Flange Size: 100 mm square dimension with a 95 mm centering diameter.
- Shaft Design: Keyed shaft (d=19 mm, k6 × 40 mm) without an oil seal.
- Cooling: Self-cooling (free air circulation).
- Brake: This exact model features no holding brake (0.00 Nm brake torque).
- Nominal Speed: 3,000 rpm (can reach a maximum peak speed of 12,000 rpm).
- Torque: 7.7 Nm nominal torque, 10.0 Nm stall torque, and up to 38 Nm peak maximum torque.
- Rated Power: 2,419 Watts (approx. 2.4 kW).
- Rated Voltage and Pole Count: Built for a 400 VAC supply and operates with 5 pole pairs.
- Feedback System: Equipped with an LTN RE-15-1-V05 resolver for heat, vibration, and electrical noise-resistant position feedback.
-
REQUEST A QUOTE
- Specification Pillar: Attribute
- Electrical Power: Continuous Current
- Peak Current: 80 A
- Continuous Power: 16 kW
- Mains Input Voltage: 3x 400 VAC to 480 VAC ±10%
- Frequency: 50 / 60 Hz
- Hardware Features: PCB Coating
- Line Filter: Integrated
- Braking Resistor: Integrated (Peak: 14 kW / Continuous: 0.4 kW)
- DC Bus Capacitance: 1645 µF
B&R 8V1320.001-2 Servo Drive (ACOPOS 1320).
-
The B&R X20AI1744 is a single-channel full-bridge strain gauge input module for the B&R X20 distributed I/O system. It is designed to connect industrial strain gauge load cells and force or torque transducers using 4-wire or 6-wire bridge configurations and evaluates the differential bridge signal with a 24-bit sigma-d
-
- Manufacturer: B&R
- Model / Part Number: X20AI4622
- Inputs: 4 analog inputs
- Input signals: ±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections
- Input type: Differential input
- Conversion time: 400 µs for all inputs
- Conversion procedure: SAR (successive approximation)
- Input filter: Third-order low-pass filter, cutoff frequency 1 kHz
-
The B&R X20BC1083 is an expandable bus controller for the B&R X20 System that connects X2X Link I/O nodes to a POWERLINK (V1/V2) network as a controlled node. It integrates a two-port shielded RJ45 hub interface based on 100BASE-TX Fast Ethernet with a transfer rate of 100 Mbit/s and a maximum segment length of 100 m b
-
- Manufacturer: B&R
- Model / Part Number: X20BM31
- Function: X20 bus module for double-width X20 modules, 24 VDC keyed, internal I/O power supply connected through
- Nominal I/O supply voltage: 24 VDC
- Permissible contact load: 10 A
- Power consumption: 0.13 W (bus)
- Certifications: CE, UKCA, ATEX Zone 2 (II 3G Ex nA nC IIA T5 Gc), cULus, HazLoc Class I Div 2, DNV, CCS, LR, KR, ABS, BV, KC
- Operating temperature: -25 to +60 C (horizontal), -25 to +50 C (vertical)
-
REQUEST A QUOTE
- Ambient Temperature: Integrated internal sensor to measure module and surrounding panel temperature.
- Relative Humidity: Onboard moisture sensor for environmental evaluation inside the enclosure.
- Inertial Features: Built-in accelerometer to detect vibration, mechanical shock, and mounting position.
- Temperature Inputs: 2 channels configured for external PT1000 temperature sensors.
- Digital Inputs: 2 channels, 24 VDC.
- Digital Output: 1 channel, 24 VDC, rated at 0.5 A.
- User Storage: 512 kB flash memory designated for storing persistent user data directly on the module.
- Data Recording: Tracks total operating hours and cumulative power-on cycles.
- Technology Guarding: Functions as a physical dongle platform directly on the module to handle software license validation.
- Blackout Mode: Supported feature allowing operation during brief system power drops.
B&R X20CMR111 Cabinet Monitoring Module (X20 System).
-
REQUEST A QUOTE
- Channels: 10 digital inputs configured for space-saving 1-wire connections.
- Circuit Type: Sink (NPN) connection profile.
- Voltage Range: Rated for flexible application across 5 to 48 VDC nominal voltage.
- Input Filters: Built-in hardware filtering combined with a software-configurable filter (adjustable from 0 to 25 ms) across the whole module to mitigate signal bounce.
- Power Requirements: Low power footprint totaling 1.84 W combined consumption.
- Diagnostics: Integrated LED status indicators for immediate visual diagnostic and troubleshooting metrics per input.
- Mounting: Supports standard DIN rail infrastructure. Safe horizontal mounting range spans -25 to 60°C, while vertical setups support -25 to 50°C.
- Protection Rating: Rated at IP20 protection with permissible operational altitudes extending up to 2000 meters.
B&R X20DI0471 Digital Input Module (X20 System).
-
- Manufacturer: B&R
- Model / Part Number: X20DI6371
- Number of inputs: 6 digital inputs, 24 VDC, for 1- or 2-wire connections
- Input characteristics: IEC 61131-2 Type 1, sink input circuit
- Input voltage range: 24 VDC -15% / +20% (nominal 24 VDC)
- Switching thresholds: Low <5 VDC, High >15 VDC
- Input current / resistance: Typ. 3.75 mA at 24 VDC; typ. 6.4 kohm
- Input filter: Hardware <=100 us; software default 1 ms, configurable 0 to 25 ms
-
REQUEST A QUOTE
- Nominal Voltage: 24 VDC (Typical range: 18–30 VDC)
- Max Continuous Current: 0.5 A per channel
- Wiring Architecture: 1-wire connection interface
- B&R ID Code: 0xC0EA (Decimal: 49386)
- Protection Mechanics: Integrated overload & short-circuit protection
- Bus Power Draw: 0.28 W
- Internal I/O Power Draw: 0.95 W (+0.56 W max actuator power dissipation)
B&R X20DOF322 Digital Output Module (X20 System).
-
REQUEST A QUOTE
- Safety Certification: PL e (Category 4) / SIL 3
- Logic Capacity: 256 function blocks + 5120 Bytes maker memory
- Safety Manager Capacity: Coordinates up to 10 SafeNODEs (some configurations allow up to 11)
- Rated Supply Voltage: 24 VDC
- Operating Temperature: 0°C to +60°C (Cabinet I/O, plug-in mounting)
- Compliance & Ratings: ATEX compliant, CE, RoHS compliant
- Input Type: Safe digital Type A inputs.
- Circuit Configuration: Sink circuit, 24 VDC.
- Features: Software input filters are individually configurable for each channel.
- Output Type: Safe digital Type B / B2 outputs.
B&R X20SLX806 Fail-Safe Mixed I/O Module (X20 System).
-
REQUEST A QUOTE
- Manufacturer: B&R
- Model / Part Number: X67DI1371.L08
- Digital inputs: 16
- Input circuit: Sink, EN 61131-2 Type 1
- Nominal input voltage: 24 V DC
- Input voltage range: 18–30 V DC
- Typical input current: 7 mA at 24 V DC
- Switching thresholds: Low <5 V DC; high >15 V DC
- Hardware input filter: ≤100 µs
- Software input filter: 1 ms
- Input connectors: 16 × M8, 3-pin
- Network interface: X2X Link, M12 B-coded
- I/O supply connector: M8, 4-pin
- Sensor supply: 0.5 A maximum total; short-circuit protected
- I/O supply range: 18–30 V DC
- Internal I/O power: 0.5 W
- X2X Link power: 0.75 W
- Isolation: Channels isolated from bus; channels not isolated from each other
- Channel-to-bus insulation: 500 V RMS
- Protection: IP67
- Operating temperature: −25 to +60 °C
- Dimensions: 53 × 155 × 42 mm (W × H × D)
- Weight: 300 g
-
REQUEST A QUOTE
- Display Resolution: SVGA 800 x 600 pixels (4:3 standard landscape aspect ratio) with a pixel density of 96 PPI.
- Display Technology: TN (Twisted Nematic), Normally White, Transmissive mode.
- Physical Dimensions: 236.0 mm (W) × 176.9 mm (H) × 5.9 mm (D) with an active screen area of 211.2 mm × 158.4 mm.
- Signal Interface: Typically driven via a 1-channel LVDS interface (20-pin configuration supporting 6-bit or 8-bit gray scale, 262K/16.2M colors). Note: Some generic replacement variations or interface modules list Parallel RGB configurations.
- Luminance (Brightness): 300 cd/m² typical constant backlight.
- Contrast Ratio: 800:1 to 1000:1 typical.
- Backlight System: Built-in White LED (WLED) lighting system designed for a 30,000-hour operating lifespan (requires an external backlight driver).
- Touch Screen: Not included natively; it is a display-only module. However, manufacturers like Miqidisplay offer custom upgrades to add capacitive or resistive touch panels.
- Environmental Tolerances: Built to withstand harsh settings, operating reliably from -20°C to 70°C and storable from -30°C to 80°C.
- Surface Treatment: Anti-glare coating (Haze 25%) to combat reflections in bright environments.
BA104S01-200 BOE TFT-LCD Display Module.
