Showing 289–304 of 2086 results
-
- Manufacturer: Autonics
- Model / Part Number: TK4S-24CN
- Display: 4-digit 7-segment LED
- Control method: ON/OFF, P, PI, PD, PID
- Input specification: TC K/J/E/T/B/R/S/N/C/G/L/U, Platinel II; RTD DPt100/DPt50/JPt100/Cu100/Cu50/Ni120; analog 0-100mV/0-5V/1-5V/0-10V/0-20mA/4-20mA
- Sampling cycle: 50 ms
- Control output 1: Current (DC 0/4-20mA) or SSR drive (11 VDC)
- Option output: Alarm 1/2
- Power voltage: 100-240 VAC~ 50/60 Hz
- Protection structure: IP65 (front panel)
-
REQUEST A QUOTE
- Form Factor / Size: 1/16 DIN (48mm × 48mm)
- Power Supply Voltage: 100–240 VAC (±10%), 50/60 Hz
- Input Sensor Type: Thermocouple Type K (CA)
- Temperature Range: 0°C to 400°C
- Control Output: Relay Contact (SPDT / Single Pole Changeover)
- Control Method: ON/OFF or Proportional (P)
- Display/Setting: Analog Dial
- Built-in Safety: Burn-Out Function
AUTONICS TOS-B4RK4C Temperature Controller (TOS Series).
-
- Manufacturer: Autonics
- Model / Part Number: TZ4L-14R
- Display method: 4-digit 7-segment LED
- Control method: ON/OFF control, P, PI, PD, PIDF, PIDS control
- Input specification: Thermocouple: K(CA), J(IC), E(CR), T(CC), R(PR), S(PR), N(NN), W(TT); RTD: DPt100 ohm, JPt100 ohm; Analog: 1-5 VDC, 0-10 VDC, DC 4-20 mA
- Sampling cycle: 500 ms
- Control output: Relay (250 VAC~ 3 A)
- Option output: Event 1
- Power voltage: 100-240 VAC~ 50/60 Hz
- Display accuracy: F.S +-0.3% or 3 deg C, whichever is higher
- Alarm output hysteresis: 1 to 100 deg C (0.1 to 100.0 deg C) variable
- Proportional band / Integral time / Derivative time: Proportional band 0.0 to 100.0%; Integral time 0 to 3,600 s; Derivative time 0 to 3,600 s
- Control period / LBA setting / Ramp setting: Control period 1 to 120 s; LBA setting 1 to 999 s; Ramp setting: Ramp Up / Ramp Down 1 to 99 min each
- Ambient environment: -10 to 50 deg C (storage: -20 to 60 deg C); 35 to 85% RH (storage: 35 to 85% RH)
- Weight: Approx. 304 g (unit only); approx. 474 g including packaging
-
- Manufacturer: AUTONICS
- Model / Part Number: TZ4SP-14R
- Display: 4-digit display
- Sensor Inputs: Thermocouple and RTD
- Control: ON/OFF or PID
- Control Output: Relay output
- Supply Voltage: 100–240 VAC
-
- Manufacturer: AUTONICS
- Model / Part Number: TZ4ST-14R
- Display Method: 4-digit, 7-segment dual LED (for simultaneous Present Value and Set Value viewing).
- Control Method: Selectable ON/OFF control, P, PI, PD, PIDF, and PIDS control modes.
- Power Supply: 100–240 VAC (~50/60 Hz).
- Control Output: Relay output rated at 250 VAC, 3A resistive load.
- Sampling Cycle: 500 ms.
- Display Accuracy: ±0.3% of Full Scale value of each input.
-
- Manufacturer: AUTONICS
- Model / Part Number: TZ4ST-24S
- Power Supply: 100 – 240 VAC ~ 50/60Hz
- Sub-Outputs: 2 Event/Alarm outputs
- Dimensions: DIN W48 x H48mm (1/16 DIN terminal type)
- Sampling Cycle: 500 ms
- Control Methods: ON/OFF, P, PI, PD, PIDF, and PIDS control
- Display Accuracy: ±0.3% of Full Scale (F.S.) value for each input
-
- Manufacturer: Autonics
- Model / Part Number: TZN4S-14R
- Power Supply: 100 – 240 VAC ~ 50/60Hz
- Dimensions: DIN W48 x H48 mm (1/16 DIN terminal type)
- Display Type: Dual 4-digit, 7-segment LED (Red for Process Value, Green for Set Value)
- Control Output: Relay contact output (250 VAC ~ 3A 1c)
- Sub Output: 1 Event Alarm Output (1A 250 VAC)
- Sampling Cycle: 500 ms
- Display Accuracy: ±0.3% of Full Scale (F.S.) value for each input
- Control Methods: ON/OFF, P, PI, PD, PIDF, PIDS control
- Thermocouples: K(CA), J(IC), E(CR), T(CC), R(PR), S(PR), N(NN), W(TT)
- RTD (Resistance Temperature Detectors): DPt100Ω, JPt100Ω
- Analog Inputs: 1-5 VDC, 0-10 VDC, 4-20 mA DC
- Ramp Functions: Supports programmable ramp up and ramp down settings (1 to 99 minutes).
- Built-in Diagnostic Alarms: Includes Loop Break Alarm (LBA) and Sensor Break Alarm (SBA) configurations.
-
REQUEST A QUOTE
- Dimensions: 150mm × 150mm × 38mm
- Operating Voltage: 220V – 240V AC
- Current Draw: 0.16A / 0.17A
- Cross-References / Alternates: Also identified by model codes RAH1538B1-C1 or AS1538L-230M.
- Design Features: Built with lightweight, corrosion-resistant plastic housing and engineered for high-temperature resistance to protect continuous-duty industrial hardware.
AXIA RAH1538B1-C AC Axial Cooling Fan (RAH Series).
-
REQUEST A QUOTE
- Device Type: Ultraviolet photoelectric tube unit
- Operation Type: Batch operation
- Service Life: 25,000 hours of operation
- Ambient Temperature: −20 °C to +120 °C
- Storage Temperature: −20 °C to +70 °C
- Ambient Humidity: 90% RH at 40 °C (non-condensing)
- Allowable Pressure: Max 35 kPa
- Ingress Protection: IP65 (when properly connected to pipes/wires)
- Mounting Nut: G1 (compatible with R1 and 1-11BSP)
- Flame Signal Wire: Max length of 200 meters (using 2.0 mm² 600 Vac IV cable)
AZBIL AUD15C1000 UV Flame Detector Tube (AUD100/110 Series).
-
REQUEST A QUOTE
- Device Type: Fiber Optic Cable Sensor Amplifier.
- Input Voltage: 10 to 30 V DC.
- Light Source: Red LED.
- Output Configuration: NPN open collector.
- Control Function: Typically features fine-tuning threshold adjustments for precise target detection on fast-moving industrial lines.
- Newegg: New (Boxed)
- OKmarts Industrial: New
- Compatible Fibers: Typically pairs with the Yamatake HPF Series plastic or glass fiber optic cables (such as the threaded M6 HPF-D001 bifurcated core) to complete the sensor setup.
AZBIL HPX-NT1 Fiber Optic Sensor Amplifier (HPX Series).
-
REQUEST A QUOTE
- Manufacturer: B&R
- Model / Part Number: 3IF786.9
- Module Type: Advanced PCI (aPCI) slot-mounted communication card
- Power Consumption: 2.5 W total (2.0 W at 3.3 V and 0.5 W at 5 V)
- Protection Rating: IP20
B&R 3IF786.9 Communication Card. Contact us for product information and quotation.
-
REQUEST A QUOTE
- Main Function: Communication bus expansion unit.
- Slot Configuration: Contains 1 x slot for a standard 32-bit PCI card.
- Card Compatibility: Specially designed to house PCI half-size expansion cards.
- Hardware System Compatibility: Exclusively compatible with the B&R Automation PC 910 (APC910) series industrial computer system.
- Standards and Certifications: Complies with CE, cULus, and maritime standards like DNV GL and Bureau Veritas.
B&R 5AC901.BX01-00 Bus Expansion Unit (APC910).
-
REQUEST A QUOTE
- Slot Configuration: 2 expansion slots total (1 PCI slot and 1 PCI Express slot).
- PCI Interface: 1 x 32-bit PCI slot supporting a 33 MHz clock and standard 2.2 half-size cards.
- PCI Express Interface: 1 x PCIe x8 slot (4 GB/s data transfer rate) supporting PCIe standard 2.0 half-size cards. It accepts x1, x4, and x8 physical PCIe devices.
- Architecture: Includes an integrated PCIe-to-PCI bridge feature to manage communication across both legacy and modern bus formats simultaneously.
B&R 5AC901.BX02-01 Bus Expansion Board (APC910).
-
REQUEST A QUOTE
- Capacity: 60 GB
- Flash Memory Type: Multi-Level Cell (MLC) technology, balancing performance and write endurance.
- Interface Compatibility: SATA 3.1 compliant (backwards compatible).
- Performance: Up to 510 MB/s continuous read speed and up to 430 MB/s continuous write speed.
- Industrial Hardening: Features S.M.A.R.T. support for health monitoring, cULus HazLoc approval for hazardous environments, and an extended operational temperature rating from -40°C to +85°C.
B&R 5AC901.CSSD-03 Solid-State Drive (SSD) (APC).
-
REQUEST A QUOTE
- Storage Capacity: 128 GB
- Flash Technology: Multi-level cell (MLC) flash memory
- Interface/Storage Type: SATA III / SATA 3.1 compatible
- Data Integrity & Diagnostics: Built-in Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) support
- Form Factor: Slide-in compact module
- System Compatibility: Designed for use in B&R Automation PC 910 (APC910) and Panel PC 900 (PPC900) system units.
- Continuous Read Speed: Max 510 MB/s to 520 MB/s
- Continuous Write Speed: Max 350 MB/s to 430 MB/s
- Shock Resistance: Rated for 1500 g for 0.5 ms
- Storage Temperature: -40°C to +85°C ambient air temperature
B&R 5AC901.CSSD-04 Solid-State Drive (SSD) (APC).
-
REQUEST A QUOTE
- Capacity: 256 GB
- Flash Memory Type: Multi-level cell (MLC) technology
- Interface: SATA 3.1 compatible (SATA III)
- Performance: Maximum continuous reading speed of 510 MB/s and writing speed of 460 MB/s
- Operating Temperature: Rated for extreme environments ranging from -40°C to +85°C
- Monitoring: Built-in S.M.A.R.T. support for health monitoring and predictive failure analysis
- Certifications: cULus HazLoc approved for hazardous locations
B&R 5AC901.CSSD-05 Solid-State Drive (SSD) (APC).
