AUTONICS CT6S-2P2 Digital Counter and Timer
- Manufacturer: AUTONICS
- Model / Part Number: CT6S-2P2
- Series: CT6S
- Display: 6-digit LED
- Input Types: Contact, NPN and PNP
- Preset Operation: Two-stage preset
- Memory: EEPROM
- Mounting: Panel mount
Showing 257–272 of 2086 results
-
-
AUTONICS E40S6-1000-3-N-24 Rotary Encoder (E40S Series)
- Encoder Type: Incremental Optical Rotary Encoder
- Housing Diameter: ∅ 40 mm (clamping type body)
- Shaft Diameter: ∅ 6 mm (solid external shaft)
- Resolution: 1000 Pulses Per Revolution (PPR)
- Output Phases: 3-Channel: A, B, and Z (Index phase)
- Control Output Type: NPN Open Collector
- Power Supply Voltage: 12–24V DC ± 5% (ripple P-P: max 5%)
- Starting Torque: Max. 40 gf·cm (Max. 0.00392 N·m)
- Connection Type: Radial Cable Type (2-meter pre-wired cable)
- Protection Structure: IP50 (IEC standard)
AUTONICS E40S6-1000-3-N-24 Rotary Encoder (E40S Series).
-
AUTONICS E40S6-2000-3-T-24 Rotary Encoder (E40S Series)
- Encoder Type: Incremental Rotary Encoder
- Housing Size: Ø40 mm diameter
- Shaft Dimensions: Ø6 mm solid shaft outer diameter
- Resolution: 2000 P/R (Pulses per Revolution)
- Output Phases: 3 Channels: A, B, Z
- Control Output Type: Totem Pole (Push-Pull compatible)
- Power Supply Voltage: 12–24 VDC ±5% (Ripple P-P: max. 5%)
- Starting Torque: Max. 40 gf·cm (0.00392 N·m)
- Connection Mechanism: Radial cable type (Standard length: 2m)
- Ingress Protection Rating: IP50 (Dust protection)
AUTONICS E40S6-2000-3-T-24 Rotary Encoder (E40S Series).
-
Autonics E40S8-200-3-N-24 Incremental Rotary Encoder
- Manufacturer: Autonics
- Model / Part Number: E40S8-200-3-N-24
- Body Diameter: 40 mm
- Shaft Outer Diameter: Ø8 mm
- Resolution: 200 Pulses per Revolution (P/R)
- Output Phases: 3 Channels (A, B, Z)
- Control Output: NPN open collector
- Power Supply Voltage: 12-24VDC ±5%
- Maximum Response Frequency: 300 kHz
- Maximum Allowable Revolution: 5000 rpm
- Starting Torque: Max. 40 gf·cm (Max. 0.00392 N·m)
- Connection Type: Radial cable type
- Protection Rating: IP50
-
AUTONICS E50S8-2048-6-L-5 Incremental Rotary Encoder
- Manufacturer: AUTONICS
- Model / Part Number: E50S8-2048-6-L-5
- Sensing Technology: Optical incremental
- Starting Torque: Max. 70 gf·cm (0.00686 N·m)
- Power Voltage: 5VDC ±5% (Max 5% ripple P-P)
- Connection Type: Axial cable type
- Protection Structure: IP50 (IEC standard)
-
AUTONICS E50S8-300-3-T-24 Incremental Rotary Encoder
- Manufacturer: AUTONICS
- Model / Part Number: E50S8-300-3-T-24
- Resolution: 300 P/R (Pulses per Revolution)
- Output Phases: 3 channels (A, B, Z)
- Control Output: Totem pole output
- Power Supply Voltage: 12-24VDC ±5% (ripple P-P: max. 5%)
- Shaft Diameter: Ø8 mm
- Diameter of Housing: 50 mm
- Connection Type: Axial cable type
- Starting Torque: Max. 70 gf·cm (Max. 0.00686 N·m)
- Protection Structure: IP50 (IEC standard)
-
AUTONICS E50S8-360-3-T-24 Incremental Rotary Encoder
- Manufacturer: AUTONICS
- Model / Part Number: E50S8-360-3-T-24
- Series: E50S
- Resolution: 360 pulses per revolution
- Shaft Diameter: 8 mm
- Output: Totem-pole output
- Supply Voltage: 12–24 VDC
-
AUTONICS E50S8-3600-3-T-24 Incremental Rotary Encoder
- Manufacturer: AUTONICS
- Model / Part Number: E50S8-3600-3-T-24
- Resolution: 3,600 Pulses per Revolution (P/R)
- Shaft Diameter: Ø8 mm
- Control Output: Totem pole type
- Output Phases: 3 Phases (A, B, Z)
- Power Supply: 12–24VDC ±5%
- Connection Type: Axial cable type
- Max Rotation: 5,000 RPM
- Max Frequency: 300 kHz
- Ingress Protection: IP50 rating
-
AUTONICS E50S8-600-3-T-24 Incremental Rotary Encoder
- Manufacturer: AUTONICS
- Model / Part Number: E50S8-600-3-T-24
- Output Type: Totem pole (works with many types of controllers like PLCs)
- Output Phases: A, B, Z (A and B measure speed/direction; Z provides a reference zero-point)
- Max Speed: 5,000 revolutions per minute (RPM)
- Max Frequency: 300 kHz (maximum speed it can send pulses safely)
- Connection Type: Axial cable type (a 2-meter wire comes directly out of the back)
- Weather Protection: IP50 rating (protected against dust, but not waterproof)
-
AUTONICS ENC-1-1-T-24 Wheel-Type Encoder (ENC Series)
- Output Type: Totem pole (Push-Pull)
- Supply Voltage: 12–24 VDC ± 5% (ripple P-P: max. 5%)
- Resolution: 1 pulse per 1 mm
- Number of Pulses: 250 pulses per revolution
- Wheel Circumference: 250 mm
- Output Phases: A, B (Allows direction sensing)
- Connection Type: Axial cable type (pre-wired)
- Protection Rating: IP50 (Indoor/Dust-resistant environment)
AUTONICS ENC-1-1-T-24 Wheel-Type Encoder (ENC Series).
-
Autonics FD-620-10 Fiber Optic Sensing Unit
- Manufacturer: Autonics
- Model / Part Number: FD-620-10
- Sensing method: Diffuse reflective
- Head mounting: Threaded bolt type
- Fiber length: 2 m, free-cut
- Minimum bend radius: 25 mm
- Sensing distance with BF4 red LED amplifier: 120 mm
- Operating temperature: −40 to +70 °C
-
AUTONICS FS4E-1P4 Digital Timer (FSE Series)
- Display Method: 4-digit 7-segment LED
- Operating Voltage: 100–240 VAC ~ 50/60 Hz
- Terminal / Base Type: 8-Pin Plug (Requires an external socket)
- Control Output: SPDT (1c) Relay Output: 5A at 250 VAC
- Timing Range: Ultra-wide range from 0.01 seconds up to 9999.9 hours
- Operation Methods: Count up, Count down
- Output Modes: Power On Delay, Flicker
- Memory Protection: Built-in non-volatile semiconductor memory (retention up to 10 years)
- Environmental Rating: IP20 protection structure (front panel)
- Flexible Input Signal Configuration: Built-in internal DIP switches allow users to switch easily between voltage inputs (PNP) and no-voltage inputs (NPN) depending on sensor type requirements.
AUTONICS FS4E-1P4 Digital Timer (FSE Series).
-
AUTONICS FX4Y-I4 Counter / Timer Indicator (FXY Series)
- Specification Attribute: Details & Performance Metrics
- Display Method: 4-digit, 7-segment LED display
- Operation Method: Counter: Count up, Count down, Count up/down
- Timer: Count up, Count down
- Power Supply: 100 to 240 V AC (± 10%), 50/60 Hz
- External Sensor Power: Maximum 12 V DC (± 10%), 50 mA
- Counting Speeds: Selectable: 1 cps, 30 cps, 2 kcps, 5 kcps
- Signal Input: Voltage input (PNP) or No-voltage input (NPN) via internal DIP switches
- Memory Protection: Approximately 10 years (Non-volatile EEPROM)
- Dimensions & Mounting: W72mm × H36mm panel mount format
AUTONICS FX4Y-I4 Counter / Timer Indicator (FXY Series).
-
AUTONICS LA8N-BF compact, 8-digit LCD digital counter
- Manufacturer: AUTONICS
- Model / Part Number: LA8N-BF
- Display: 8-digit, 7-segment LCD panel with an 8.7 mm character height for clear readability.
- Input Signal Type: Universal AC/DC voltage input, which accepts signals ranging from 24V to 240V AC or 6V to 240V DC.
- Counting Speed: Maximum of 20 cps (counts per second).
- Operation Method: Count-up indicator (keeps adding numbers sequentially).
- Size & Mounting: Compact DIN size (W48mm × H24mm × L54mm) designed for standard panel cutouts.
- Environment Protection: IP66 rated front panel, making it dustproof and waterproof against low-pressure water streams.
-
AUTONICS LE3S digital, programmable LCD timer
- Manufacturer: AUTONICS
- Model / Part Number: LE3S
- Time Range: It can track time from 0.01 seconds up to 9,990 hours.
- Output Type: SPDT (Single Pole Double Throw) relay output rated at 250 VAC / 5A. This allows it to act as an automatic switch for another device.
- Size: Standard 1/16 DIN size (W48mm × H48mm × L67mm), making it compact enough to fit into tightly packed electrical control panels.
- Mounting: Built as an 8-pin plug type device. You will need a matching 8-pin socket (like a PG-08 or PS-08 base) to wire it up to a panel or DIN rail.
- ON Delay: Waits for a set amount of time after receiving a signal before turning on.
- OFF Delay: Keeps a machine running for a set time before turning it off.
- Flicker (Cycle): Continuously flashes a device on and off at set intervals (useful for warning lights or sirens).
- Interval Delay: Turns an output on immediately when triggered, keeps it on for the set duration, and then turns it off.
- Integration Time: Accumulates time over multiple short periods.
- The Numbers: Shows the current counting time. You can set it to count up from zero or count down from your target time.
- The Bar Graph: A small visual progress bar fills up in 5% steps to show you how close the timer is to finishing.
- Contact Status: Displays a graphic icon showing whether the internal switch is currently Open (NO) or Closed (NC).
- Start: Tells the timer to begin running.
- Reset: Instantly resets the current time count back to the beginning.
- Inhibit: Freezes the current count in place temporarily without resetting it.
-
AUTONICS LE4S Industrial Electrical Component
- Manufacturer: AUTONICS
- Model / Part Number: LE4S
- Power Supply: 24–240 VAC (50/60 Hz) or 24–240 VDC
- Terminal Type: 8-pin plug
- Input Method: No-voltage NPN input
- Minimum Input Time: Selectable between 1 ms or 20 ms
- Return/Reset Time: Max 100 ms
- Control Output Type: Time-limit SPDT (Single Pole Double Throw) relay
- Contact Capacity: 5 A at 250 VAC / 30 VDC (resistive load)
- Output Modes: 10 variations including ON Delay, Interval, Flicker, ON-OFF Delay, and OFF Delay
- Time Operation: SIGNAL ON START (the timer begins when an electrical signal is received)
- Overall Time Range: Extremely wide window from 0.01 seconds up to 9999 hours
- Fine-Tuning: High-precision setting option down to 0.001-second units (for the 9.999s range)
- One-Shot Output Time: Configurable from 0.01 to 99.99 seconds
- Screen Display: 4-digit, 7-segment LCD screen with a bright backlight
- Counting Direction: Can count up or count down
- Data Protection: Includes a key-lock setting function to safely store configuration data
- Interface: Soft-touch front buttons for simple programming