Showing 241–256 of 2086 results
-
REQUEST A QUOTE
- Screen Size: 7.0 inches (diagonal)
- Resolution: 800 × 480 pixels (WVGA) at approximately 133 PPI
- Display Type: a-Si TFT-LCD, LCM module
- Backlight: Integrated WLED system with an included LED driver
- Contrast Ratio: 500:1 (Typical)
- Touchscreen: None (This is the display panel only; it does not include a touch digitizer layer)
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
AUO A070VW05 V0 TFT-LCD Display Panel (A070VW05 Series).
-
REQUEST A QUOTE
- Screen Size: 10.1 inches (Diagonal)
- Native Resolution: 800 × 480 pixels (WVGA)
- Pixel Arrangement: RGB Vertical Stripe
- Display Mode: TN, Normally White, Transmissive
- Interface Type: Parallel RGB (1-channel, 6-bit)
- Color Support: 262K colors
- Luminance (Brightness): 180 cd/m² (Typical)
- Contrast Ratio: 400:1 (Typical)
- Response Time: 12 ms / 18 ms (Rising/Falling)
- Viewing Angles: 65° / 65° / 45° / 65° (L / R / U / D)
AUO A101VW01 V.1 TFT-LCD Module (A101 Series).
-
- Manufacturer: AUO
- Model / Part Number: G104STN01.0
- Display size: 10.4 inch diagonal, 4:3 aspect ratio
- Resolution: 800 x 600 pixels (SVGA), RGB vertical stripe
- Brightness: 400 cd/m2 (typical)
- Contrast ratio: 700:1 (typical)
- Signal interface: LVDS, 1 channel, 6/8-bit, 20-pin connector
- Backlight: White LED (WLED) with integrated driver, 50,000 h rated lifetime
-
REQUEST A QUOTE
- Screen Size: 15.0 inches (Diagonal)
- Native Resolution: 1024 × 768 (XGA, 4:3 aspect ratio)
- Pixel Configuration: RGB Vertical Stripe
- Display Mode: TN, Normally White, Transmissive
- Surface Treatment: Anti-glare, Hard coating (3H)
- Luminance / Brightness: 350 cd/m² (Nits) typical
- Contrast Ratio: 700:1 typical
- Viewing Angle: 80°/80° (Horizontal) | 80°/60° (Vertical) at CR ≥ 10
- Response Time: 5.7 ms (Rising) / 2.3 ms (Falling)
- Color Support: 262K (6-bit) or 16.2M (6-bit + FRC), 65% CIE1931
AUO G150XG01 V.2 TFT-LCD Panel (G150 Series).
-
REQUEST A QUOTE
- Sensing Type: Diffuse Reflective
- Sensing Distance: 2 meters (Based on non-glossy white paper 200×200mm)
- Control Output: PNP Open Collector
- Operation Mode: Light ON (Note: The BA2M-DDTD-P variant handles Dark ON)
- Power Supply: 12–24 VDC ±10% (Ripple P-P: max. 10%)
- Current Consumption: Max. 15 mA (Max. 30 mA when the output is ON)
- Light Source: Infrared LED (850 nm modulated)
- Response Time: Max. 1.0 ms
- Sensing Target: Opaque and translucent materials
- Hysteresis: Max. 20% at sensing distance
AUTONICS BA2M-DDT-P Diffuse Reflective Photoelectric Sensor (BA2M Series).
-
REQUEST A QUOTE
- Sensing Type: Diffuse Reflective
- Sensing Distance: 100 mm (3.937 in)
- Sensing Target: Opaque, Translucent
- Light Source: Infrared LED (850 nm)
- Power Supply: 12–24 VDC
- Response Time: Max. 1 ms
- Current Consumption: Max. 30 mA
- Control Output: Open Collector
- Operation Mode: Light-ON / Dark-ON
- Protection Circuit: Multi-Protected
AUTONICS BR100-DDT Photoelectric Sensor (BR Series).
-
- Manufacturer: Autonics
- Model / Part Number: BX5M-MFR-T
- Sensing type: Retroreflective type (standard type)
- Sensing distance: 5 m with MS-2 reflector
- Sensing target: Opaque material of min. 60 mm diameter
- Emitter / wavelength: Infrared LED, 850 nm
- Response time: Max. 20 ms
- Power voltage: 24-240 VAC ±10% 50/60 Hz; 24-240 VDC ±10% (ripple P-P max. 10%)
-
The Autonics BX700-DFR is a universal AC/DC photoelectric sensor of the BX Series with a diffuse reflective sensing type and a long 700 mm sensing distance (measured against a 200 x 200 mm non-glossy white paper target). It detects opaque and translucent materials using an infrared LED light source with a 940 nm wavele
-
- Manufacturer: Autonics
- Model / Part Number: BX700-DFR-T
- Sensing type: Diffuse reflective type
- Sensing distance: 700 mm (non-glossy white paper 200 x 200 mm)
- Sensing target: Opaque, translucent material
- Emitter: Infrared LED (940 nm)
- Response time: Max. 20 ms
- Power voltage: 24-240 VAC ±10% 50/60 Hz, 24-240 VDC ±10% (ripple P-P: max. 10%)
-
The Autonics BYD100-DDT is a compact diffuse reflective photoelectric sensor from the BYD Series, designed for presence and object detection in confined machine spaces. It provides a 100 mm sensing distance against opaque and translucent materials using an infrared LED light source, and is built for a 12 to 24 V DC pow
-
- Manufacturer: Autonics
- Model / Part Number: CR18-8AC
- Sensor type: Cylindrical capacitive proximity sensor, M18 threaded
- Sensing distance: 8 mm (standard target 50 x 50 x 1 mm iron)
- Power supply: AC 2-wire type, 100-240 VAC
- Control output: Normally Closed (NC), leakage current max. 2.2 mA
- Response frequency: 20 Hz
- Degree of protection: IP66 (IEC standard)
-
- Manufacturer: Autonics
- Model / Part Number: CR18-8DN
- Sensor type: Cylindrical capacitive proximity sensor, M18 threaded
- Sensing distance: 8 mm (standard target 50 x 50 x 1 mm iron)
- Power supply: DC 3-wire type, 12-24 VDC
- Control output: NPN Normally Open (NO), current consumption max. 15 mA
- Response frequency: 50 Hz
- Degree of protection: IP66 (IEC standard)
-
REQUEST A QUOTE
- Sensing Diameter: M30 (30 mm)
- Mounting Type: Non-flush (Non-shielded)
- Sensing Distance: 0 to 15 mm
- Standard Target: 50 × 50 × 1 mm (Iron)
- Wire Configuration: AC 2-wire
- Control Output: Normally Closed (NC)
- Operating Voltage: 100–240 V AC
- Leakage Current: Max. 2.2 mA
- Response Frequency: 20 Hz
- Environmental Protection: IP65 / IP66
AUTONICS CR30-15AC Capacitive Proximity Sensor (CR Series).
-
- Manufacturer: Autonics
- Model / Part Number: CR30-15DP
- Sensor type: Cylindrical capacitive proximity sensor; sensing side diameter M30
- Sensing distance: 15 mm (standard sensing target 50 x 50 x 1 mm iron)
- Control output: DC 3-wire, PNP normally open
- Supply voltage: 12-24 VDC; current consumption max 15 mA
- Response frequency: 50 Hz (average value)
- Hysteresis: Max 20% of sensing distance
-
REQUEST A QUOTE
- Specification Attribute: Design Parameter Details
- Display Method: 4-digit, 7-segment dual LED display (Process Value: 11mm character height)
- Power Supply: 100–240 VAC (~ 50/60 Hz) with an allowable range of 90% to 110%
- Power Consumption: Maximum 12 VA
- Input Signal Methods: Selectable Voltage input (PNP) or No-voltage input (NPN)
- Control Outputs: Single-stage preset configuration with Relay (SPDT 1c) and NPN open-collector outputs
- Memory Protection: Non-volatile EEPROM data retention for approximately 10 years
- Physical Dimensions: 48 mm (W) x 48 mm (H) with a standard 45 × 45 mm panel cutout
- Ingress Protection: IP65 dust and water resistance restricted to the front panel structure
- Counting Methods: Functions across standard Count Up, Count Down, or bidirectional Count Up/Down modes.
AUTONICS CT4S-1P4 Counter / Timer (CT Series).
-
REQUEST A QUOTE
- Power Supply: 100–240 VAC (~ 50/60 Hz)
- Power Consumption: Max. 12 W
- Display Type: Dual-line, 6-digit 7-segment LED (Current Value: Red, Preset Value: Green)
- Counting Range: -99,999 to 999,999
- Input Logic: Voltage input (PNP) or No-voltage input (NPN)
- Control Output Type: 1-Stage Preset
- Output Contacts: (1) SPDT (1c) Relay Output + (1) NPN Open Collector Solid-State Output
- Memory Protection: EEPROM (Approx. 10 years of data retention)
- Terminal Type: Screw Terminal Block
- Protection Structure: IP65 rated dust and water resistance (Front Panel only)
AUTONICS CT6S-1P4 Counter / Timer (CT Series).
