Showing 513–528 of 2131 results
-
REQUEST A QUOTE
- Running Time: 4 seconds for a 90° rotation, making it ideal for processes requiring rapid air volume adjustments.
- Torque: 8 Nm (Newton meters), capable of driving air dampers up to approximately 1.5 m² in size.
- Nominal Voltage: AC/DC 24 V (50/60 Hz).
- Control Type: Modulating 2…10 V DC control signal.
- Position Feedback: 2…10 V DC for precise system monitoring.
- Power Consumption: 13 W while running, 2 W in holding mode, and 23 VA for wire sizing.
- Enclosure Rating: IP54 and NEMA 2, providing solid environmental protection.
- Shaft Connection: Equipped with a universal shaft clamp supporting round and square shafts measuring 8…26.7 mm.
- Manual Override: Includes a lockable, self-resetting push-button to disengage the gear train for manual damper adjustment.
- Rotation Control: Features a selectable direction of motion switch (0/1) and adjustable mechanical end stops to limit the maximum angle of rotation (up to 95°).
BELIMO NMQ24A-SR Modulating Damper Actuator (NMQ Series).
-
REQUEST A QUOTE
- Nominal Resistance: 10 kΩ
- Tolerance: ±5%
- Linearity: ±2%
- Resolution: Min. 1%
- Loading Capacity: Max. 1 W
- Enclosure Rating: IP54 (guarantees protection against dust and moisture splashes)
- Electrical Connection: Pre-wired 1-meter (3 ft), 3-conductor, halogen-free cable
- Housing Color: Grey (used for visual differentiation from other resistance variations like the 140 Ω, 500 Ω, or 2800 Ω models).
- Closed-Loop Monitoring: Directly feeds real-time resistance measurements back to an automation controller to indicate exact damper blade or valve position.
- Simple Mechanical Coupling: Mounts directly over the actuator spindle via an integrated shaft clamp mechanism, requiring no complex linkages.
BELIMO P10000A Feedback Potentiometer (P Series).
-
REQUEST A QUOTE
- Nominal Resistance: 2.8 kΩ (2800 ohms) with a ±5% tolerance.
- Loading Capacity: Max. 1 W.
- Connection: Pre-wired with a 1-meter (3 ft) 3-wire halogen-free cable.
- Environmental Protection: Enclosed in a grey housing rated for IP54 (NEMA 2 / UL Enclosure Type 2).
BELIMO P2800A Feedback Potentiometer (P Series).
-
REQUEST A QUOTE
- Nominal Resistance: 500 Ω
- Tolerance: ±5%
- Linearity: ±2%
- Loading Capacity: Max. 1 W
- Enclosure Rating: IP54 (Dust & splash proof)
- Electrical Connection: 1-meter halogen-free cable (3 × 0.75 mm²)
- Closed-Loop Feedback: Provides a continuous resistive signal to commercial proportional temperature controllers to indicate exact valve or damper positioning.
- Remote Position Indication: Routes resistance changes directly to external electric meters or building automation system (BAS) monitoring panels.
- Parallel Actuator Control: Serves as a master positioner to synchronize the operation of multiple slave actuators linked across the same network.
BELIMO P500A Feedback Potentiometer (P Series).
-
REQUEST A QUOTE
- Auxiliary Switch: 1x SPDT (Single Pole Double Throw), adjustable from 0 to 100% across the full range of rotation.
- Switching Capacity (AC): 1 mA to 3 A (0.5 A inductive) at max AC 250 V.
- Switching Capacity (DC): 1 mA to 0.5 A (0.2 A inductive) at DC 5 V to DC 110 V.
- Connection Type: Pre-wired cable, 1 meter (approx. 3 feet), 3x 0.75 mm².
- Wiring Colors: S1 = Violet, S2 = Red, S3 = White.
- Mounting: Attaches directly onto the spindle clamp of damper actuators or the position indicator of rotary actuators.
- Enclosure Rating: IP54, NEMA 2, UL Enclosure Type 2.
- Protection Class: IEC/EN II (reinforced insulation).
- Ambient Temperature: -22°F to 122°F (-30°C to 50°C).
BELIMO S1A Auxiliary Switch (S Series).
-
REQUEST A QUOTE
- Switching Capacity: 3A (0.5A inductive) at 250 VAC max
- Contacts: 2x SPDT (Single Pole Double Throw)
- Switching Points: 0% to 100% fully adjustable rotation range via internal dials
- Electrical Connection: Pre-wired integrated 1-meter (3 feet) cable, 6 x 0.75 mm²
- Operating Temperature: -30°C to 50°C (-22°F to 122°F)
- Prepare the Actuator: Remove the clear position indicator ring and its underlying black plastic mounting bracket from the face of the actuator.
- Zero the Actuator: Manually press the gear release button and rotate the clamp fully counter-clockwise against the mechanical stop.
- Set Switching Points: Re-attach the driver disk mechanism. Use a flat-head screwdriver to align the indicator arrows on the internal dials to the exact angular points where you want your switches to trip.
- How To: Install the Belimo S2A Auxiliary Switch
BELIMO S2A Auxiliary Switch (S Series).
-
REQUEST A QUOTE
- Switch Type: 2x SPDT
- Electrical Rating: 3 A (0.5 A inductive) @ 250 VAC max
- Enclosure Rating: IP54 / NEMA 2
- Connection: 3 ft (1 m) pre-wired cable, 6x 0.75 mm² (18 AWG)
- Ambient Temperature: -22°F to 122°F (-30°C to 50°C)
- Spring Return Actuators: LF, TF, NF..A, SF..A, NF-US, AF-US
- Fire & Smoke Actuators: FSNF, FSAF, BLF, BF
- How To: Install S1A and S2A Auxiliary Switches on Actuators
- How To: Install the Belimo S2A Auxiliary Switch
BELIMO S2A-F Auxiliary Switch (S Series).
-
REQUEST A QUOTE
- Power & Voltage: 24 V AC/DC (50/60 Hz), with a power consumption of 5 W during operation and 3 W in rest position.
- Control & Feedback: Modulating control input signal of 0–10 VDC, operating range of 2–10 V, and mechanical position feedback of 2–10 V.
- Torque: 20 Nm (Newton-meters) for both motor and spring-return functions.
- Running Time: 140 to 150 seconds for motor operation, and a rapid emergency spring-return fail-safe time of less than 20 seconds.
- Mechanical Interface: Universal shaft clamp compatible with damper spindles ranging from 10 mm to 25.4 mm.
- Environmental Protection: IP54 enclosure rating (NEMA 2) with a permissible ambient temperature range of -30°C to 50°C.
- Fail-Safe Operation: When power is interrupted, the internal mechanical spring automatically drives the connected air damper back to its designated safe position (either fully open or fully closed depending on mounting orientation).
- Manual Override: Features an integrated locking switch and manual crank that allows for temporary positioning of the damper when the system is unpowered.
- Angle of Rotation: Adjustable up to a maximum angle of 95° using integrated mechanical end stops.
- Maintenance: Overload-protected and completely maintenance-free with a rated service life of at least 60,000 fail-safe positions.
BELIMO SF24A-SR Modulating Spring-Return Damper Actuator (SF Series).
-
REQUEST A QUOTE
- Power Supply: 24V AC/DC (50/60 Hz)
- Power Consumption: 0.3 W (running) / 1 VA (for wire sizing)
- Output Control Signal: 2 to 10 VDC or 0.5 to 10 VDC (selectable via an internal slider switch on the PCB)
- Mounting Type: Surface mounted
- Housing Rating: Included NEMA 2 (IP54 protected enclosure)
- Wiring Connection: Screw terminals handling up to 14 AWG max
- Remote Control: Serves as a manual remote dial to position a proportional actuator from 0 to 100% of its rotation angle.
- Minimum Positioner / Limit: Can act as a "higher-of-two" signal selector. When wired inline with a primary controller, it ensures the actuator never closes past the minimum position set on the dial.
- Mechanical Limits: Includes adjustable mechanical stops beneath the turn-knob to physically limit the dial's rotation range.
- Design Data: Design Data. View Project Lists Duplicate with Configuration Continue Shopping. Bookmark this page. Share. Details; …
BELIMO SGA24 Positioner (SGA Series).
-
REQUEST A QUOTE
- Supply Voltage: AC/DC 24 V (50/60 Hz)
- Power Consumption: 0.3 W (Running) / 1 VA (Wire sizing)
- Control Signal Output (Y): Selectable 2…10 VDC or 0.5…10 VDC via internal slide switch
- Control Range: 0 to 100% of the actuator's rotation angle
- Mounting Style: Flush, front-panel mounting (Note: If you need surface mounting, look for the Belimo SGA24)
- Protection Class: IP40
- Wiring Terminals: Supports up to 1.5 mm² (14 AWG) wire max
- Remote Manual Control: Turning the manual rotary knob outputs a proportional signal directly to the actuator to adjust airflow manually. The physical rotation range of the knob can be limited mechanically using adjustable physical stops.
- Minimum Positioner Limit: When wired alongside an automatic master controller, the SGF24 acts as a "higher of two signal" selector. Whichever signal is greater—the automated controller or the manual positioner—is sent to the actuator, ensuring a minimum damper position is strictly enforced (e.g., for fresh air requirements).
BELIMO SGF24 Positioner (SGF Series).
-
REQUEST A QUOTE
- Nominal Voltage: AC 100…240 V (50/60 Hz)
- Torque: 20 Nm
- Control Type: Open/close, 3-point
- Power Consumption: 2.5 W (In operation) / 0.6 W (In rest)
- Running Time: 150 s / 90°
- Damper Spindle Size: 10…20 mm (universal clamp)
- Protection Rating: IP54
- Connection: 1m PVC cable
- Simple Direct Mounting: Attaches easily onto a standard damper spindle utilizing a universal shaft clamp. It is supplied with an anti-rotation mechanism to ensure high operational stability.
- Manual Override: The integrated gear train can be temporarily or permanently disengaged by pressing a self-resetting push-button, allowing for seamless manual damper adjustment.
BELIMO SM230A Damper Actuator (SM Series).
-
REQUEST A QUOTE
- Nominal Voltage: AC/DC 24 V, 50/60 Hz
- Torque: 20 Nm
- Control Type: Open/Close (2-point) or 3-point
- Integrated Auxiliary Switch: 1x SPDT (Single Pole Double Throw), adjustable 0…100%
- Running Time: 150 seconds for a 90° rotation
- Angle of Rotation: Max. 95°, adjustable with mechanical end stops
- Power Consumption: 2 W (In Operation) / 0.2 W (At Rest) / 4 VA (Wire Sizing)
- Enclosure Protection Class: IP54 (IEC/EN) / NEMA 2
- Connection Type: Pre-wired 1-meter PVC cable (3x 0.75 mm²)
- Integrated Signaling: The built-in SPDT auxiliary contact provides feedback for defined damper positions or can trigger safety releases.
BELIMO SM24A-S Damper Actuator (SM Series).
-
REQUEST A QUOTE
- Torque: 20 Nm (Newton meters)
- Power Supply: 24 V AC/DC (50/60 Hz)
- Control Type: Modulating (Proportional)
- Control Signal (Operating Range): 2…10 V DC
- Position Feedback: 2…10 V DC
- Running Time: 150 seconds for a 90° rotation
- Angle of Rotation: Max. 95° (adjustable with mechanical end stops)
- Protection Class: IP54 / NEMA 2
- Power Consumption: 2 W during operation / 0.4 W in standby
- Universal Shaft Clamp: Fits standard damper shafts from 10 mm to 20 mm.
BELIMO SM24A-SR Modulating Damper Actuator (SM Series).
-
REQUEST A QUOTE
- Torque: Minimum 16 Nm at nominal voltage.
- Damper Size: Optimized for air dampers up to approximately 3.2 m².
- Running Time: Ultra-fast 7 seconds.
- Control Type: Open-close (Note: Not suitable for 3-point/floating control applications).
- Nominal Voltage: AC 24 V (50/60 Hz) / DC 24 V.
- Voltage Range: AC 19.2 to 28.8 V / DC 21.6 to 28.8 V.
- Power Consumption (Operation): 15 W at nominal torque.
- Power Consumption (Rest/At-Rest Position): 2 W.
- Wire Sizing Capacity: 26 VA (with a maximum inrush current of 20 A @ 5 ms).
- Electrical Connection: Pre-wired with a 1-meter cable (3 x 0.75 mm²).
BELIMO SMQ24A Damper Actuator (SMQ Series).
-
REQUEST A QUOTE
- Torque: 16 Nm
- Running Time: 7 seconds (for a 90° angle of rotation)
- Nominal Voltage: AC/DC 24 V (50/60 Hz)
- Control Type: Modulating
- Operating Range: DC 2…10 V (for precise positioning)
- Position Feedback: DC 2…10 V
- Enclosure Rating: IP54 (protects against dust and moisture)
- Simple Installation: Mounts directly onto standard damper shafts using a universal clamp and is secured against over-rotation with a built-in safety catch.
- Manual Override: Features a self-returning push button that disengages the gear train temporarily for easy manual adjustments.
- High Operational Safety: The unit is completely overload-proof. It does not require end or limit switches because it automatically stops when it hits a mechanical restriction.
BELIMO SMQ24A-SR Modulating Damper Actuator (SMQ Series).
-
REQUEST A QUOTE
- Nominal Voltage: AC 100…240 V (50/60 Hz)
- Nominal Torque: Min. 20 Nm
- Control Type: Open/close, 3-point
- Power Consumption (Running): 3 W
- Power Consumption (Holding): 0.6 W
- Power For Wire Sizing: 7 VA
- Running Time (Motor): 90 s / 90°
- Protection Category: IP54 / NEMA 2
- Connection Cable: 1 m, 3x 0.75 mm²
- Manual Override: Push-button (lockable gear disengagement)
BELIMO SR230A-5 Valve Actuator (SR Series).
