Showing 241–256 of 2131 resultsSorted by latest
-
- Manufacturer: CHIMEI
- Model / Part Number: EJ080NA-05B
- Screen Size: 8.0 inches diagonally
- Resolution: 800 (RGB) × 600 pixels (SVGA) with a 4:3 aspect ratio
- Display Technology: TN, Normally White, Transmissive
- Active Area: 162.0 mm × 121.5 mm (H × V)
- Outline Dimensions: 183.0 mm × 141.0 mm × 5.9 mm (H × V × D)
- Brightness: 250 cd/m² (Typical)
- Contrast Ratio: 500:1 (Typical)
- Viewing Angles: 70° left, 70° right, 50° up, 70° down (Typical, at CR ≥ 10)
- Display Colors: 262K (6-bit) or 16.7M (6-bit + Dithering)
- Surface Treatment: Matte, Anti-Glare
- Touch Panel: None (ships without integrated touch, but external modules can be retrofitted)
- Signal Interface: Parallel RGB / TTL (1 channel, 6/8-bit), connected via a 50-pin FPC connector
- Input Voltages: Typical ratings are VCC = 3.3V, AVDD = 10.4V, VGH = 16.0V, VGL = -7.0V
- Backlight System: White LED (WLED) array arranged in a 3s9p configuration.
- Power Consumption: Panel consumes roughly 0.356W, while the backlight uses 1.782W.
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
-
- Manufacturer: CARLO GAVAZZI
- Model / Part Number: DMB51CM24B028
- Op (Delay on Operate): Waits for a set time before turning on.
- In (Interval): Turns on right away, stays on for a set time, then shuts off.
- Io (Interval on Trigger Open): Starts a timed run after an external switch opens.
- Id (Double Interval): Turns on twice based on separate signal triggers.
- Dr (Delay on Release): Stays on for a set time after the control switch is opened.
- R (Symmetrical Recycler ON First): Blinks on and off repeatedly, starting with "on".
- Rb (Symmetrical Recycler OFF First): Blinks on and off repeatedly, starting with "off".
- Wide Time Range: It can time things as short as 0.1 seconds or as long as 100 hours.
- Flexible Power Supply: It works with both alternating current (AC) and direct current (DC) power networks (specifically 24 VDC and 24 to 240 VAC).
- Output Relay: It uses a Single Pole Double Throw (SPDT) relay rated for 5 Amps at 250 VAC.
-
- Manufacturer: MITSUBISHI
- Model / Part Number: HC-KFS73B
- Rated Output Capacity: 750 W (0.75 kW)
- Supply Voltage Class: 200 VAC class
- Rated Current: 5.8 A (Maximum current: 18.6 A)
- Rated Rotational Speed: 3000 RPM
- Maximum Speed: 4500 RPM
- Rated Torque: 2.4 Nm nominal
- Maximum Torque: 7.2 Nm peak
- Moment of Inertia: 0.0001635 kg·m² (1.635 kg·cm²)
- Feedback Encoder: 17-bit absolute feedback encoder (131,072 p/rev)
- Shaft Design: Standard straight shaft
- Electromagnetic Brake: Built-in / Installed
- Flange Size: 80mm x 80mm mounting
- Dimensions: H 98.1mm x W 82mm x D 217.5mm
- Ingress Protection: IP55 rated (excluding the shaft portion and connector)
- Operating Temperature: 0°C to +40°C ambient
- Storage Temperature: -15°C to +70°C
- Approximate Weight: 2.5 kg to 3.0 kg
- HC-KFS: Low inertia, small capacity series
-
- Manufacturer: KINCO
- Model / Part Number: GL043
- Screen Size: 4.3 inches (Diagonal)
- Display Area: 95.04 mm (Width) x 53.86 mm (Height)
- Resolution: 480 x 272 pixels
- Colors: 16.77 million True Color (24-bit)
- Backlight: LED with over 30,000 hours of life
- Brightness / Luminance: 450 cd/m²
- Touchscreen Type: 4-wire high-precision resistive network (Surface hardness of 4H)
- Processor (CPU): 32-Bit ARM RISC Cortex-A7 architecture, running at 800 MHz
- Storage Memory (Flash): 128 MB NAND Flash (Used for storing your programs and data)
- System Memory (RAM): 128 MB DDR3 RAM
- Real-Time Clock (RTC): Built-in.
- Serial Ports: 2 Physical COM Ports
- USB Port: 1 x Micro USB Slave port (Used for downloading your screen designs from a computer)
- Input Voltage: Supports a wide range from 10V DC to 28V DC (Nominal 24V DC)
- Power Consumption: Very low power usage, around 2 Watts
- Insulation Resistance: Greater than 50MΩ at 500V DC
- Operating Temperature: Works safely between 32°F and 122°F (0°C to 50°C)
- Front Protection: The front panel is rated IP65 (Dust-tight and protected against water jets when mounted correctly in a panel wall).
- Outer Size: 132 mm x 102 mm x 33 mm
- Weight: 0.21 Kg (Super lightweight)
- Programming Software: Designed and programmed using the free Kinco DTools configuration software.
-
- Manufacturer: BANNER
- Model / Part Number: QS30EDV
- Part Number: 76090
- Sensing Mode: Diffuse (it bounces light directly off the object to look for it)
- Sensing Beam: Visible red LED (660 nm wavelength)
- Normal Mode: 1400 mm
- High-Speed Mode: 1100 mm
- Power Input: 10–30 V dc
- Output Type: Bipolar NPN/PNP discrete outputs
- Connection: 2-meter (6.5 feet) built-in cable
- Response Time: 0.3 to 1.8 milliseconds
-
- Manufacturer: INFINEON
- Model / Part Number: FF150R12KS4
- Voltage Rating: 1200 Volts (1.2kV) maximum collector-emitter voltage.
- Current Rating: 150 Amperes continuous nominal current (can peak higher up to 225A).
- Power Dissipation: Capable of handling up to 1.25 Kilowatts (kW) of heat dissipation.
- Circuit Configuration: Half-Bridge (2 switches inside one module).
- Isolated Copper Base Plate: Provides extreme thermal conductivity to giant heatsinks while keeping the electrical current safely separated.
-
- Manufacturer: ABB
- Model / Part Number: NPBA-12
- Product Part Number: 64348221 (or alternate manufacturing IDs like 64248677)
- Network Protocol: PROFIBUS DP
- Data Transfer Speed: Up to 12 Mbps
- Power Requirement: 24V DC (Draws about 70 mA)
- Degree of Protection: IP20 (Safe to touch, but not waterproof)
- Mounting: Snaps onto a standard DIN rail
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R48H
- Detection Height: 940 mm (37.01")
- Protection Height: 985 mm (38.78")
- Total Component Length: 960 mm (37.80")
- Operating Range (Detecting Distance): 0.2 to 15 meters (0.66 to 49.21 feet)
- Response Time (ON to OFF): 9.6 milliseconds (when using wire synchronization)
- Degree of Protection: IP65 / IP67 (IEC 60529) water and dust resistance
- Control Outputs: 2 x transistor outputs (PNP or NPN, determined by your choice of connection cable)
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620PS5R5I
- Series: IS620P (Pulse/Analog control variant)
- Output Current: 5.5 A
- Input Voltage / Phase: Single-phase or Three-phase 220V/230V AC
- Power Range: Commonly paired with motors around 750W to 1.0 kW (depending on application and phase configuration)
- Speed Loop Bandwidth: Up to 1.2 kHz
- Dimensions: 160 x 50 x 173 mm
- Control Protocols: Primarily supports pulse and analog command interfaces, along with Modbus communication.
-
- Manufacturer: KOYO
- Model / Part Number: TRD-J1000-RZV
- Series: ENC/E50S
- Encoder Type: Incremental Rotary Encoder
- Resolution: 1-5000 PPR
- Output: Totem/NPN/Line Driver
- Shaft: 6/8/10mm
- Supply: DC 5-24V/12-24V
- Protection: IP50-IP65
-
- Manufacturer: HITECH
- Model / Part Number: PWS6A00T-N
- Display Type: Color TFT LCD
- Housing Size: 10.4 inches (diagonal)
- Resolution: 640 x 480 pixels
- Colors: 64K colors
- Brightness: 450 cd/m²
- Backlight: LED (with a lifetime of around 50,000 hours)
- Touchscreen: Analog resistive
- Processor: 32-bit RISC CPU
- Flash Memory: 8 MB
- System RAM: 512 KB
- Operating Software: Configured via H-Designer software
- Peripherals: Features USB host and device ports for data transfers
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1562
- Amperage Rating: 32 Amps (32A)
- Voltage Rating: 690V AC according to international IEC standards, or 700V AC under UL safety standards
- Interrupting Rating (Breaking Capacity): 200,000 Amps (200kA) — meaning it can safely stop massive electrical surges
- Physical Size: DIN 000 (a standard compact size designation for industrial hardware)
- Shape & Mounting: Square body construction featuring knife blade contacts and live gripping lugs for secure installation
- Utilization Category: Class gR (fast-acting full-range protection specialized for semiconductors)
- Indicator: Built-in dual fuse status indicator to visually confirm when the fuse has blown
-
- Manufacturer: PHOENIX CONTACT
- Model / Part Number: 2981800
- Function: Emergency stop, safety door, and light grid monitoring.
- Control Voltage: 24 V DC.
- Current Rating: 6 A maximum current.
- Contacts: Features a maximum of 3 undelayed and 2 dropout delay contacts.
- Delay Time: Adjustable dropout delay from 0.1 to 30 seconds.
- Connection Type: Plug-in screw connection.
- Mounting: Standard DIN rail mounting.
- Safety Ratings: Up to SIL 3 (IEC 61508) and Performance Level e (EN ISO 13849-1).
-
- Manufacturer: LENZE
- Model / Part Number: E82MV552-4B001
- Rated Power: 5.5 kW / 7.5 HP
- Input Electrical Profile: 3-Phase | 400V to 500V AC | 50/60 Hz | 16.8A to 13.4A
- Output Electrical Profile: 3-Phase | 0V to 400V/500V AC | 0 to 650 Hz | 13A to 10.4A
- Control Type: Supports standard V/Hz (Volts per Hertz) control and sensorless vector control for precise torque and speed management.
- Enclosure Rating: IP20 (intended for installation inside a control panel or cabinet).
-
- Manufacturer: KYOCERA
- Model / Part Number: KCS057QV1AJ-G20
- Screen Size: 5.7 inches diagonally.
- Resolution: 320 x 240 pixels (QVGA resolution).
- Display Type: CSTN (Color Super-Twist Nematic) passive matrix color LCD.
- Brightness: 200 cd/m² (nits).
- Contrast Ratio: 40:1.
- Backlight: CCFL (Cold Cathode Fluorescent Lamp) single tube.
- Operating Temperature: 0°C to 60°C (32°F to 140°F).
- Dimensions: 154.6 mm wide x 114.8 mm high x 8.5 mm thick.
- FRM: Frame synchronous signal (vertical sync)
- LOAD: Data latch clock
- CP: Data shift clock
- DISP: Display control signal
- VDD: Power supply for logic (usually 3.3V or 5V)
- VSS: Ground (GND)
- VEE: Power supply for the LCD panel itself
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R71F
- Detection Type: Finger protection.
- Beam Count: 71 individual light beams.
- Beam Spacing: 10 mm between each beam.
- Detection Capability: It spots any object thicker than 14 mm (0.55 inches).
- Protection Height: 724 mm (28.5 inches) of vertical safety coverage.
- Operating Range: Operates at a distance of up to 10 meters.
