Showing 177–192 of 226 results
-
REQUEST A QUOTE
- Specification Attribute: Details & Metrics
- Manufacturer: Mitsubishi Electric (MELSEC-F Series)
- Total Built-in I/O: 48 Points (Expandable up to 256 I/O points locally)
- Digital Inputs: 24 Inputs (24V DC, Sink/Source flexible configuration)
- Digital Outputs: 24 Relay Outputs (Normally Open contacts)
- Rated Voltage / Supply: 24V DC (Allowable supply range: 16.8V to 28.8V DC)
- Output Capacity: 2A per point (240V AC or 30V DC max)
- Program Memory: 64,000 Steps (Internal RAM, expandable via optional cassette)
- Execution Speed: High-speed processing (0.065 μs per basic instruction)
- On-board Comms: Integrated RS-422 port; expandable via specialized function boards
Brand New MITSUBISHI FX3U-48MR-DS PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Analog Inputs: 8 differential channels (Screw-fastened Euroblock terminal)
- Input Ranges: Voltage: 0 to 10 VDC
- Current: 0 to 20 mA, 4 to 20 mA (with built-in 120 Ω resistor & burn-out detection)
- Resolution & Accuracy: 16-bit resolution; Accuracy: ±0.1% FSR @ 25°C (±0.3% FSR across full operating temp)
- Sampling Rate: 12 samples/sec per module
- Network Interface: 2-port 10/100 Mbps Ethernet switch (RJ45 connectors) supporting daisy-chaining
- Isolation Protection: 1.5 kV Magnetic isolation; 3 kVDC or 2 kVrms I/O isolation
- Environmental Limits: Standard models: -10 to 60°C (14 to 140°F)
- Wide-temp (-T) models: -40 to 75°C
- Certifications: Class I Division 2, ATEX Zone 2, UL 508, CE/FCC
Brand New MOXA IOLOGIK E1240 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Designation: RC 3 RG-400…575/4-M20 X 1,5 M6
- Suppression Type: RC (Resistor-Capacitor) network
- Voltage Range: 3× 400 V AC to 3× 575 V AC
- Motor Power Rating: Up to 4 kW
- Frequency Range: 50 to 60 Hz
- Dimensions: 44 x 39 x 39 mm
- Connection Type: Open-end cable
Brand New MURR 23141 Motor EMI Line Filter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Specification Parameter: Details & Values
- Channels: 1 input / 1 output
- Power Supply: 18 ~ 60 V DC
- Input Signal: 4 ~ 20mA, HART
- Input Line Resistance: Approx. 75Ω
- Available Voltage: Open-circuit voltage ≤ 26V; ≥ 16V at 20mA
- Output Signal: 4 ~ 20mA, HART
- Load Resistance: RL ≤ 550 Ω
- Transfer Accuracy: 0.1 % F.S.
- Temperature Drift: 30 ppm/°C
- Response Time: ≤ 2 ms
- Power Dissipation: 1.3 W
- Safety Integrity Level: Certified SIL3.
- Safe State Indicator: The output signal drops below 3.6mA or exceeds 21.5mA to flag faults.
- Galvanic Isolation: Full galvanic isolation between input, output, and power supply channels.
- Insulation Resistance: ≥ 100 MΩ (Input / Output / Power supply).
- Product Approvals: NEPSI, SIL, CE, FCC, CCS, CCC.
- Operating Temperature: -20 °C to +60 °C
- Storage Temperature: -40 °C to +80 °C
- Mounting Location: Must be mounted in a safe area and connected to intrinsically safe apparatus in hazardous areas (Zone 0, Zone 1, Zone 2, ⅡA, ⅡB, ⅡC, T4 ~ T6).
- Connection Method: Screw connection.
- Mounting Type: DIN 35 mm rail.
- Dimensions: 12.8mm (W) × 110mm (H) × 117mm (D).
Brand New NewPwR NPEXA-CM31 Analog Input Safety Barrier (NPEXA Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Connectors: One 68-pin male SCSI connector for direct ribbon/shielded cable assembly, alongside 68 screw terminals for custom wire routing.
- Orientation: It features a vertical-mounted connector. (Note: If you need a right-angle layout instead, look for the NI CB-68LPR variant).
- Form Factor: Includes physical standoff feet. It is suitable for flat desktop use or for mounting directly into a custom panel layout.
- Dimensions: 5.65 x 4.23 x 1.18 inches (14.35 x 10.74 cm).
- Voltage & Mapping: The block passes signals through on a 1-to-1 pin mapping to your DAQ board. It acts as a passive connector and does not change the voltage limitations of your specific hardware system.
Brand New NI CB-68LP 68-Pin Connector Block (CB Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Analog Input (AI): 8 Single-Ended / 4 Differential
- AI Resolution: 16-bit
- AI Max Sample Rate: 50 kS/s
- Input Voltage Range: ± 10 V
- Analog Output (AO): 2 Channels
- Digital I/O (DIO): 13 Bidirectional Lines
- Counter/Timer: 1 Channel (32-bit)
- Connectivity: Screw-Terminal Blocks
- Bus Interface: USB 2.0
- FIFO Buffer Size: 2,047 samples
Brand New NI USB-6002 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Transmission Rate: Transmits at 100 Mb baud over single-mode fiber.
- Fiber Requirements: Optimized for 9/125 μm single-mode fiber-optic cable.
- Wavelength & Attenuation: Operates at a 1310 nm wavelength with a maximum attenuation allowance of 30 dB.
- Connectors: Built with LC-style fiber connectors.
- Dual Node Capacity: Each card can accommodate up to two node addresses simultaneously (e.g., servicing an NFS2-640 panel and an NCA-2 annunciator at once).
- Isolation: Complete optical isolation eliminates ground loops and provides high environmental noise immunity.
- Network Wiring Resilience: Supports both NFPA Style 4 (Class B) and Style 7 (Class A) topologies.
- System Integration: Fully supports panel database uploads and downloads through the High-Speed NFN.
- Compatible Hardware: Universally integrates with Notifier ONYX series panels and network infrastructure, including the N16, NFS-320, NFS-640, NFS2-640, NFS-3030, NFS2-3030, NCA/NCA-2 Network Control Annunciators, NCD, and DVC Digital Voice Command units.
Brand New NOTIFIER HS-NCM-SF Network Communications Module (HS-NCM Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Module Type: CJ-Series PLC Expansion/Rack Module
- Control Loops: 2 Independent Loops (with Heater Burnout Detection)
- Input Channels: 4 Inputs (Resistance Thermometer / RTD: Pt100 / JPt100)
- Output Channels: 4 Outputs (Solid State Relay / SSR Drive / PNP Open Collector Voltage Pulse)
- Indication Accuracy: ± 0.3% of Process Value (PV) ± 0.8°C to 1°C
- Operating Voltages: 5 VDC (via CJ1 Backplane Bus) | 24 VDC external output drive
- Current Consumption: 0.25 A max at 5 VDC
- Connection Style: Industrial Screw Terminal Block (Removable for easy maintenance)
- Mounting: DIN Rail / CJ-Series Backplane Rack
- Autonomous Architecture: The module executes localized temperature adjustments utilizing internal PID loops independent of the main PLC CPU execution cycle. This minimizes the processor overhead of the host controller.
Brand New OMRON CJ1W-TC104 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Number of Points: 16 digital outputs.
- Rated Voltage: 24 VDC (Operating load range of 15.0 to 28.8 VDC).
- Maximum Current: 0.5 A per point, capped at a maximum of 4 A total per unit.
- ON/OFF Response Time: 0.5 ms maximum OFF-to-ON delay / 1.0 ms maximum ON-to-OFF delay.
- Connection Method: 1-wire connection layout using a detachable push-in (spring-clamp) terminal block.
- Protection: Short-circuit protected outputs.
- Refreshing Methods: Supports Free-Run, Standard Speed, and Synchronous I/O refreshing (synchronizes directly with the controller cycle when connected via EtherCAT).
Brand New Omron NX-OD5256 Digital Transistor Output Unit (NX Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Supply Voltage: 24V DC (operating range: 20.4V DC to 28.8V DC)
- Current Consumption: 170 mA
- Operating Temperature: 0°C to +55°C
- Momentary Power-Off Time: 4 ms (at 20.4V DC) to 10 ms (at 24V DC or higher)
- Program Capacity: Variable step options: 24k, 32k, 40k, or 64k steps (configurable via system registers)
- Memory Type: Built-in Flash ROM (no backup battery required)
- Instruction Set: ~120 basic instructions; ~270 high-level instructions
- Built-in I/O Points: 32 points total (16 inputs / 16 outputs)
- Digital Inputs: 16 points, 24V DC (Supports NPN or PNP configurations)
- Digital Outputs: 16 points, 24V DC Transistor, NPN type (300mA / 100mA max load)
Brand New PANASONIC AFP0HC32ET PLC Controller. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: FP0H
- Supply Voltage: 24 V DC (Operating range: 20.4 to 28.8 V DC)
- Current Consumption: 140 mA or less
- Program Capacity: 32k steps built-in Flash ROM (no backup battery required)
- Memory Capacity: 32K words data memory
- I/O Expandability: Max. 384 points (Up to 7 expansion modules)
- Communication Interfaces: Built-in USB (Mini B) and RS-232C ports
- Connection Type: MIL connector (40-pin wiring termination)
- Net Weight: ~110 g
- Rated Input Voltage: 24 V DC
Brand New PANASONIC AFP0HC32T PLC Controller. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- I/O Capacity: 32 built-in I/O points (16 Digital Inputs and 16 Digital Outputs). It is expandable up to 128 total I/O points.
- Input Specifics: 24V DC Sink/Source inputs (includes 6 channels capable of 50kHz high-speed counting).
- Output Specifics: 24V DC Transistor NPN (Sink) outputs rated at 0.2A (includes 4 pulse outputs at 50kHz for axis control and 4 PWM channels).
- Memory Structure: 32k steps of program memory (with run-mode programming capabilities) and a 32k-word data memory capacity.
- Communication Ports: Built-in RS-232C serial communication port alongside a mini-USB programming interface.
- Physical Connection: Built-in MIL connector format for highly dense wiring layouts on a standard DIN rail mount.
- Programming Environment: Fully configurable through Control FPWIN Pro 7 programming software.
Brand New PANASONIC AFP0R-C32CT AFP0RC32CT PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- I/O Capacity: 14 Total Built-in I/O (8 Inputs / 6 Outputs)
- Input Type: 24V DC Digital (Supports both NPN/Sink and PNP/Source configurations)
- Output Type: Relay outputs (2 A max rating per channel)
- Supply Voltage: 24V DC
- Memory Capacity: 16k steps EEPROM program capacity
- Communication Ports: 1 x RS-232C COM Port, 1 x Mini-USB Tool Port
- Termination Type: Screw Terminal Block
- Mounting: Standard DIN Rail
- Software Compatibility: Programmed using FPWIN Pro 7
- High-Speed Processing: Equipped with built-in advanced functionalities, including support for independent high-speed counters and multi-axis pulse outputs.
Brand New PANASONIC AFP0RC14CRS FP0R-C14CRS PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Total I/O Count: 14 built-in channels (expandable up to 110 I/O).
- Inputs: 8 points, supporting both NPN and PNP configurations.
- Outputs: 6 points, switching via durable mechanical Relay contacts.
- Program Memory: 16k steps capacity.
- Supply Voltage: 24V DC.
- Communication Ports: Built-in RS232C tool port and an independent Mini-USB interface for fast programming and troubleshooting.
- Physical Connections: Screw terminal blocks.
Brand New PANASONIC AFP0RC14RS FP0R-C14RS PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Control Unit Type: FP0R-C14RS
- I/O Configuration: 14 I/O points total, consisting of 8 Inputs (24VDC, compatible with both NPN/PNP sink or source) and 6 Outputs (Relay contacts, 2A).
- Memory Capacity: 16k steps of program memory alongside a large data register allocation.
- Supply Voltage: 24V DC.
- Connectivity & Programming Ports: Features a built-in Mini USB port and an RS-232C port for tool programming and communication flexibility.
- Termination & Mounting: Uses standard screw terminal blocks for secure wiring and mounts directly onto a standard DIN rail.
Brand New PANASONIC AFP0RC14RS PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series Compatibility: Panasonic FP-X / FP-XH PLC Series
- Number of Channels: 1 Channel
- Interface Types: RS-485 or RS-422 (Selectable via hardware/software switches)
- Insulation Type: Fully insulated port (protects the PLC from voltage spikes and ground loops)
- Maximum Baud Rate: Up to 115 kbps
- Wiring Termination: M3 Screw terminals
- Mounting Type: Direct plug-in slot on the FP-X controller body
- Space-Saving Expansion: It mounts directly onto the front face of the PLC, preserving valuable control panel space.
- Multi-Drop Networking: Ideal for configuring Modbus-RTU, MEWTOCOL, or general-purpose serial communication networks to connect HMIs, variable frequency drives (VFDs), sensors, or other PLCs.
- Electrical Protection: Internal electrical insulation ensures stable communications in high-interference industrial environments.
Brand New PANASONIC AFPX-COM3 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
