Showing 81–96 of 1316 resultsSorted by latest
-
REQUEST A QUOTE
- Voltage Supply Range: 10 – 30 VDC.
- Output Current: Under 100 mA.
- Adjustment: Teach-in button setup.
- Indicators: Green LED for power/alignment status and a Yellow LED for the output indicator.
- Enclosure Rating: IP65 protection against dust and water jets.
- Operating Temperature: -20 °C to +50 °C.
- Dimensions: Subminiature rectangular body measuring 16.2 mm x 8 mm x 10.8 mm.
Brand New BANNER FHDK 07P6901 Diffuse Photoelectric Sensor (FHDK 07 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Processor: ARM9, 400 MHz (single-core)
- Main Memory: 64 MB DDR2 RAM
- Interface: Integrated 2-port switched Ethernet
- Mounting: DIN-rail mountable
- Series: Beckhoff CX8000 Series embedded PC
- Application: Small-scale industrial automation, decentralized control
Brand New BECKHOFF CX8090 Embedded PC Controller (CX8000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Nominal Voltage: AC/DC 24 V (50/60 Hz)
- Torque: 4 Nm (approx. 35 in-lb)
- Control Type: Modulating DC 2…10 V proportional signal
- Position Feedback: DC 2…10 V
- Power Consumption: 2.5 W running / 1 W holding (5 VA wire sizing)
- Running Time (Motor): 150 seconds for 90° rotation
- Running Time (Fail-Safe): < 20 seconds (Spring Return)
- Fail-Safe Position: De-energized NC (Normally Closed / Valve Closed)
- Auxiliary Switch: Integrated SPDT switch for position feedback or safety interfacing
- Angle of Rotation: 90°
- Manual Override: Hand lever included
- Enclosure Rating: IP54 / NEMA 2
- Ambient Temperature Range: -30°C to 50°C [-22°F to 122°F]
- Electrical Connection: Pre-wired cable (1 meter supply/control cable and integrated auxiliary switch cable)
Brand New BELIMO LFH24-SR-S Rotary Valve Actuator (LF Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Bus Interface: 2 × RJ45 (built-in daisy-chaining/cascading)
- Data Transfer Rate: 100 Mbit/s (100BASE-TX)
- Power Supply: 24 V DC (-15% / +20%)
- K-Bus Current Supply: 1750 mA
- Power Contacts: Max. 24 V DC / Max. 10 A
- Electrical Isolation: 500 V (contacts / supply / Ethernet)
- Operating Temperature: -25°C to +60°C
- Protection Rating: IP20
- Topology Versatility: The dual RJ45 ports allow the coupler to act as a line or star topology endpoint. The upper port connects to the network segment, while the lower port interfaces with downstream EtherCAT devices.
- Placement Restrictions: In an EtherCAT network, the BK1120 can be positioned anywhere along the 100BASE-TX signal transfer section, except directly connected to a standard Ethernet switch (it requires an EtherCAT Master or an appropriate junction component like an EK1000).
- Configuration: System integration and parameterization can be handled via the Beckhoff KS2000 Configuration Software or through EtherCAT ADS (Automation Device Specification).
- Diagnostics: Features onboard LEDs indicating the status of the EtherCAT state machine (RUN and ERROR), alongside standard indicators for the 24 V coupler supply and active power contact bridging.
Brand New BECKHOFF BK1120 EtherCAT Bus Coupler (BK Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Range: 4 mm
- Installation Type: Non-flush (unshielded)
- Switching Output: PNP, Normally Open (NO)
- Housing Dimensions: M12x1 thread diameter, 50 mm length
- Connection: M12x1 male connector, 4-pin
- Operating Voltage: 10…30 VDC
- Switching Frequency: 2500 Hz
- Housing Material: Nickel-free coated brass with a Polybutylene Terephthalate (PBT) sensing surface
- Environmental Protection: IP68 rating
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Brand New BALLUFF BES 516-356-E5-C-S4 Inductive Proximity Sensor (BES 516 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Housing Size / Style: M12x1 threaded barrel, Ø 12 x 78 mm
- Installation Type: Flush mounting
- Sensing Range: 1.5 mm
- Switching Output: PNP Normally Open (NO)
- Operating Voltage: 10…30 VDC
- Switching Frequency: 1000 Hz
- Maximum Pressure Rating: 500 bar
- Enclosure Rating: IP68
- Housing Material: Stainless steel with an EP sensing surface
- Electrical Connection: M12x1-Male connector, 4-pin
- Operating Temperature: -25°C to +80°C
- Official Factory Source: Available directly via the Balluff Webshop.
Brand New BALLUFF BES 516-300-S135-S4-D Inductive Proximity Sensor (BES 516 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Mode: Polarized Retroreflective
- Output Type: Complementary PNP (Light-ON & Dark-ON options)
- Response Time: 2 milliseconds (ms)
- Operating Temperature: -20°C to +70°C (-4°F to +158°F)
- Standard Cable: Pre-wired 2-meter (6.5 ft) cable with flying leads
Brand New BANNER DS18VP6LP Polarized Retroreflective Sensor (DS18 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Encoder Protocol: Supports EnDat 2.1 absolute encoders and sine incremental encoders.
- Encoder Power Supply Output: Provides 5 V DC at up to 250 mA.
- Physical Interface: Equipped with a 15-pin female D-sub connection.
- Slot Compatibility: Plugs into Slot 1 of ACOPOS servo drives.
- Signal Frequency Capacity: 300 kHz at -3 dB; 400 kHz at -5 dB.
- Data Protocol: RS485 communication protocol up to a maximum baud rate of 625 kbaud.
- Hardware Diagnostics: Automatically identified by the drive firmware upon startup; features built-in LED indicators and line monitoring to instantly catch open circuits or encoder supply faults.
- Physical Specs: Enclosed in an IP20 protection class shell when fully seated; weighs roughly 0.08–0.1 kg.
Brand New B&R 8AC120.60-1 Encoder Interface Module (8AC Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Type: Through-beam (direct beam)
- Sensing Distance: 0.1 to 5 meters
- Number of Optical Axes: 12 beams
- Optical Axis Pitch: 20 mm
- Sensing Height: 220 mm
- Light Source: Infrared LED (850 nm modulated)
- Power Voltage: 12–24 VDC ±10% (ripple P-P: max. 10%)
- Control Output: NPN open collector
- Operation Mode: Light ON / Dark ON (selectable via switch)
- Response Time: Up to 7 ms
Brand New AUTONICS BWP20-12 Photoelectric Area Sensor (BWP Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: B&R System 2003
- Module Type: AF101 Analog Interface Adapter Module
- Capacity: 4 expansion slots for screw-in sub-modules
- Weight & Form Factor: Approximately 0.21 kg to 0.40 lbs (Packaged shipping weight can vary up to 2 kg). Dimensions are roughly 12 x 9 x 7 cm.
- Compliance Certifications: CE, UKCA, UL (cULus E115267), and EAC approved.
Brand New B&R 7AF101.7 Analog Interface Module (System 2003 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 10.1 inches (Diagonal) AccuView
- Native Resolution: 800 × 480 (WVGA) Panelook
- Aspect Ratio: 16:9 Wide Aspect AccuView
- Display Mode: TN, Normally White, Transmissive ElecOK
- Contrast Ratio: 500:1 (Typical) ElecOK
Brand New AUO A101VW01 V.3 TFT-LCD Display Panel (A101VW01 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Type: Through-beam type (slot/groove style)
- Sensing Distance: Fixed 5mm width
- Groove Depth: 9mm
- Control Output: NPN open collector output (Max 30 VDC, Max 100mA)
- Power Supply: 5-24 VDC ±10%
- Operation Mode: Light-ON / Dark-ON selectable via control terminal wiring
- Response Frequency: 2 kHz high-speed response
- Light Source: Infrared LED (940nm)
- Connection Type: Connector type
- Indicator: Red LED operation indicator
- Dust Protection: Emitters and receivers are sealed with a protective window to ensure reliable tracking in dusty industrial settings.
- Output Variation Note: The base BS5-T2M utilizes an NPN open collector output. If your system integration requires a PNP open collector layout, you will need the companion model BS5-T2M-P.
Brand New AUTONICS BS5-T2M Through-Beam Photoelectric Sensor (BS5 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: PowerFlex 525
- Frame Size: Frame C
- Voltage Input: 380–480 VAC, 3-Phase (Operational range: 323–528 VAC)
- Output Rating: 0–460 VAC, 3-Phase (0–500 Hz frequency output range)
- Power Output: 7.5 HP / 5.5 kW
- Amperage: 13 Amps continuous output
- Enclosure Type: IP20 / NEMA Open Type (intended for panel mounting)
- Filtering: No internal EMC filter
- Braking: Includes integrated Brake IGBT
- Motor Control Profiles: Supports Volts per Hertz (V/Hz), Sensorless Vector Control (SVC), Closed Loop Velocity Vector Control, and Permanent Magnet Motor Control.
- Embedded Connectivity: Features built-in EtherNet/IP and Modbus RTU communication protocols for network integration.
- Safety Functions: Equipped with Safe Torque-Off (STO) certified at PLd/SIL2 Cat 3, which cuts rotational power without removing full drive power.
- Physical Footprint: Employs a modular design allowing the control core to be removed for simultaneous configuration and mounting. It supports Zero Stacking™ layout configurations with a 50 mm airflow gap.
Brand New ALLEN-BRADLEY 25B-D013N104 Variable Frequency Drive (PowerFlex 525 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Panel Brand: AU Optronics (AUO)
- Panel Model: A101VW01 V0 (V.0)
- Panel Size & Type: 10.1" Diagonal, a-Si TFT-LCD
- Display Resolution: 800 (RGB) × 480 pixels (WVGA)
- Aspect Ratio: 15:9
- Active Area: 219.6 (W) × 131.76 (H) mm
- Outline Dimensions: 235.0 (W) × 145.9 (H) × 5.9 (D) mm
- Weight: 315 g
- Surface Treatment: Anti-Glare (Matte)
- Display Mode: TN, Normally White, Transmissive
Brand New AUO A101VW01 V.0 TFT-LCD Display Module (A101VW01 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Product Line: PowerFlex 525 Series
- Input Voltage: 380–480V AC, 3-Phase (50/60 Hz)
- Output Current: 13 Amps
- Power Rating: 5.5 kW / 7.5 HP (Normal & Heavy Duty)
- Frame Size: Frame C
- Enclosure Rating: IP20 NEMA / Open Type
- EMC Filter: Integrated / Internal EMC Filter
- Brake Chopper: Integrated Brake IGBT
- Dimensions: 18.4 cm x 10.9 cm x 22.0 cm (7.24" x 4.29" x 8.66")
- Weight: 3.5 kg (7.7 lbs)
- Advanced Motor Control: Supports Volts per Hertz (V/Hz), Sensorless Vector Control (SVC), closed-loop velocity vector control, and permanent magnet motor control.
- Embedded Connectivity: Features an integrated RJ45 EtherNet/IP port for seamless configuration and control network integration, alongside dual-port option cards.
- Integrated Safety: Features hardware Safe Torque-Off (STO) certified at PLd/SIL2 Cat 3, which cuts rotational power to the motor without shutting down the entire drive.
- Modular Design: The control module splits from the power module, allowing you to perform software configuration and wiring installations simultaneously to save commissioning time.
- High-Frequency Output: Capable of handling output frequencies up to 500 Hz to drive high-speed motor applications.
Brand New ALLEN-BRADLEY 25B-D013N114 Adjustable Frequency AC Drive (PowerFlex 525 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Rated Output Power: 2.2 kW (3 HP)
- Output Current: 6.2 A
- Input Voltage: 380 to 480 V AC, 3-phase, 50/60 Hz
- Output Frequency: 0 to 500 Hz
- Motor Control: Scalar control (V/f), optimized for variable torque (pumps and fans)
- Enclosure Rating: IP20 (cabinet or wall mount)
- Frame Size: R1
- Communication: Embedded Modbus EIA-485 interface
Brand New ABB ACS310-03E-06A2-4 Variable Frequency Drive (ACS310 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
