Showing 97–112 of 1357 resultsSorted by latest
-
REQUEST A QUOTE
- Manufacturer: ALLEN-BRADLEY
- Model / Part Number: 100-D180D11
- Current Rating: 180 Amperes continuous current.
- Coil Voltage: Conventional AC operating coil rated for 110V AC at 50 Hz / 120V AC at 60 Hz.
- Power Ratings: Capable of handling motors up to 60 HP at 230V, 150 HP at 460V, or structural loads up to 101 kW.
- Auxiliary Contacts: Built-in configuration with 1 NO (Normally Open) + 1 NC (Normally Closed) contacts.
- Design & Mounting: Non-reversing type, open-style construction engineered for direct panel mounting with screw-type terminals.
-
REQUEST A QUOTE
- Manufacturer: ALLEN-BRADLEY
- Model / Part Number: 100-C12EJ10
- Amperage Rating: 12 A at 400V (AC-3), 32 A at 400V (AC-1), and a 12 A thermal current rating.
- Power & Horsepower Ratings: 5.5 kW at 400V AC-3. It is rated for 3 HP at 230V and 7.5 HP at 460V for 3-phase motor loads.
- Coil Voltage: 24V DC Electronic Coil (low power consumption, drawing roughly 1.7 W hold-in power).
- Contact Configuration: 3 Normally Open (N.O.) main power poles plus 1 N.O. integrated auxiliary contact.
- Termination & Mounting: Screw-type terminals with line side coil termination. Supports base panel mounting or installation on standard 35 mm DIN rails.
- Physical Protection: IP20 / IP2X finger protection.
- Environmental Limits: Operational range between -25°C and +60°C.
- Dimensions: 81 mm Height × 45 mm Width × 86.5 mm Depth; weighs approximately 0.4 kg.
- Compliance Standards: Certifications include UL, cUL, CSA, CE, CCC, C-TICK, GOST, and KC. It conforms to IEC/EN 60947-4-1 and 60947-5-1.
-
REQUEST A QUOTE
- Manufacturer: ABB
- Model / Part Number: ACS580-01-430A-4
- Model Number: ACS580-01-430A-4
- Global Product ID: 3AUA0000080510
- Power Rating: 250 kW (Normal Use / 400V) or 350 HP (Light Overload / 460V)
- Output Current: 430 A
- Input Voltage: 380 V to 480 V AC (3-Phase, 50/60 Hz)
- Enclosure Rating: IP21 / UL Type 1 standard
- EMC Filter: Integrated Category C2 filter
- Dimensions: 95.5 cm x 38.0 cm x 41.8 cm (H x W x D)
- Weight: 97 kg (213.8 lbs)
- Built-In Standard Features: Includes an intuitive setup assistant control panel, variable-speed cooling fans, and a built-in Safe Torque Off (STO) safety function.
- Protocol Support: Supports embedded Modbus RTU connectivity alongside option modules for PROFIBUS, EtherNet/IP, and PROFINET IO.
- Energy Management: Features integrated energy calculators that track hourly, daily, and cumulative energy savings.
- PLC Direct: Offers brand-new units with detailed component lists and full industrial application specifications on the PLC Direct Product Catalog.
- WiAutomation: Provides international shipping options for factory-new ABB frequency converters through the WiAutomation Online Store.
-
REQUEST A QUOTE
- Manufacturer: ABB
- Model / Part Number: ACS580-01-363A-4
- Input Voltage: 3-phase, 380V to 480V AC (Standard 400V rating).
- Current Rating: 363 A (Normal duty / Light overload).
- Heavy Duty Power: 160 kW (215 HP) at 293 A for high-overload applications.
- Light Duty Power: 200 kW (270 HP) to 345 A / 363 A for variable torque loads.
- Control Modes: Scalar (V/Hz) and Sensorless Vector control.
- Enclosure Rating: Typically standard IP21 (UL Type 1) wall-mount hardware.
- Physical Weight: Approximately 97 kg (214 lbs).
- All-In-One Built Features: Includes integrated EMC filters, a choke to mitigate harmonics, and Modbus RTU fieldbus connectivity as standard equipment.
- Assistant Control Panel: Uses an intuitive settings menu and computational setup assistants for straightforward commissioning, operation, and rapid error troubleshooting.
- Target Systems: Optimized for large-scale industrial pumps, fans, compressors, conveyors, mixers, and extruders.
- Primary Industries: Deployed globally across food and beverage processing, plastics manufacturing, textiles, agriculture, and material handling plants.
- Electrical Hazard Safety: Operators must wait at least 5 minutes after disconnecting the main power supply before touching internal components to let the capacitors discharge safely. Verify zero voltage with a calibrated meter.
- Circuit Board Cleaning: When clearing dust accumulation, technicians must utilize a specialized anti-static vacuum hose and nozzle. Normal household vacuum units create static discharges that permanently damage internal drive circuitry.
- Debris Extraction: Use clean, dry, oil-free compressed air from bottom to top, while keeping a vacuum running concurrently at the top exhaust to secure loose particulates.
-
REQUEST A QUOTE
- Manufacturer: ABB
- Model / Part Number: ACS580-01-293A-4
- Power Rating: 160 kW (215 HP) under normal/light-overload fan and pump configurations. It supports heavy-duty applications down to 132 kW (175 HP).
- Input Voltage: 3-phase, 380 V to 480 V AC (50/60 Hz).
- Enclosure Rating: IP21 (standard wall-mount configuration).
- Physical Footprint: Dimensions of approximately 39.3 cm x 30.0 cm x 96.5 cm with a baseline unit weight of 69 kg.
- Product ID / SKU: 3AUA0000080508.
-
The Autonics BYD100-DDT is a compact diffuse reflective photoelectric sensor from the BYD Series, designed for presence and object detection in confined machine spaces. It provides a 100 mm sensing distance against opaque and translucent materials using an infrared LED light source, and is built for a 12 to 24 V DC pow
-
The Autonics BX700-DFR is a universal AC/DC photoelectric sensor of the BX Series with a diffuse reflective sensing type and a long 700 mm sensing distance (measured against a 200 x 200 mm non-glossy white paper target). It detects opaque and translucent materials using an infrared LED light source with a 940 nm wavele
-
The B&R X20BC1083 is an expandable bus controller for the B&R X20 System that connects X2X Link I/O nodes to a POWERLINK (V1/V2) network as a controlled node. It integrates a two-port shielded RJ45 hub interface based on 100BASE-TX Fast Ethernet with a transfer rate of 100 Mbit/s and a maximum segment length of 100 m b
-
The B&R X20AI1744 is a single-channel full-bridge strain gauge input module for the B&R X20 distributed I/O system. It is designed to connect industrial strain gauge load cells and force or torque transducers using 4-wire or 6-wire bridge configurations and evaluates the differential bridge signal with a 24-bit sigma-d
-
The Allen-Bradley 25B-D030N104 is a PowerFlex 525 adjustable frequency AC drive from the Rockwell Automation PowerFlex 520-series, the 380 to 480 V AC three-phase catalog version rated 20 HP (15 kW) Normal Duty and 15 HP (11 kW) Heavy Duty, with 30.0 A continuous output current in Normal Duty. The drive provides a prog
-
The Allen-Bradley 25B-D017N104 is a PowerFlex 525 adjustable frequency AC drive from the Rockwell Automation PowerFlex 520-series, the 380 to 480 V AC three-phase catalog version rated 10 HP (7.5 kW) in both Normal Duty and Heavy Duty with 17.0 A continuous output current. The drive covers a programmable output frequen
-
The ABB ACS310-03E-41A8-4 is the largest power class of the ABB ACS310 general purpose AC drive family (0.37 to 22 kW series), configured for three-phase 380 to 480 V AC supply and rated for a typical motor power of 18.5 kW (25 hp). It provides a maximum continuous output current of 41.8 A (I2N, at 40 °C ambient withou
-
The ABB ACS310-03E-17A2-4 is a general purpose low-voltage AC drive from the ABB ACS310 series (0.37 to 22 kW family), configured for three-phase 380 to 480 V AC supply and rated for a typical motor power of 7.5 kW (10 hp). It delivers a maximum continuous output current of 17.2 A (I2N, at 40 °C ambient without overloa
-
REQUEST A QUOTE
- Type: LCD digital thermostat / temperature control panel
- Application: 2-pipe central air conditioning fan coil units (FCU)
- Display: LCD
- Control: Single water valve control for 2-pipe systems
- Manufacturer: Carrier
Brand New CARRIER TMS710SA LCD Thermostat Controller (TMS710 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Function: 3-phase monitoring relay (phase sequence, total and partial phase loss)
- Supply / Measuring Voltage: 208 to 480 VAC (±15%)
- Output: Relay output
- Series: Carlo Gavazzi DPA51CM44
- Application: Protection of electrical systems and motors
Brand New CARLO GAVAZZI DPA51CM44B014T Phase Monitoring Relay (DPA51 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Voltage Input Range: 208 to 480 V AC (covers 3-phase mains systems from 177 V AC up to 552 V AC with a ±15% tolerance).
- Output Configuration: 1 Single Pole Double Throw (SPDT) relay, normally energized.
- Current Contact Rating: 5 Amps switching maximum.
- Frequency Range: 50 to 60 Hz.
- Housing Profile: 17.5 mm ultra-compact width for space-saving DIN-rail mounting.
- Safety & Certifications: UL, CSA, and CE compliant.
- Phase Sequence Protection: Prevents three-phase motors from starting or running in the reverse rotation, which can quickly cause catastrophic mechanical failures in HVAC compressors, industrial conveyors, and pumps.
- Phase Loss Monitoring: Automatically disconnects the load if any individual phase drops out, avoiding motor overheating and rapid torque reduction.
- Regenerated Voltage Detection: Safely triggers a fault response even if a failing motor attempts to reconstruct a missing phase voltage up to 85% of the nominal grid value.
- Plug-and-Play System: Operates on an automatic setup profile requiring no manual setting adjustments or external calibration. Dual LED bulbs give instant visual diagnostics for "Power Supply On" and "Relay Status".
- Logistics Note: The suffix variation "B014" is a specific packaging or manufacturing batch suffix often designated on units distributed directly from factory assembly facilities in Europe and Asia. It remains fundamentally interchangeable with the standard catalog identifier DPA51CM44.
Brand New CARLO GAVAZZI DPA51CM44B014 Phase Monitoring Relay (DPA51 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
