Showing 529–544 of 2131 resultsSorted by latest
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FS1R6I-RT
- Control Capabilities: Features a 1.2 kHz speed loop bandwidth. This means it can react and adjust its speed very quickly (in milliseconds) to keep machines running smoothly.
- Supported Motors: Works flawlessly with Inovance MS1 high-response servo motors equipped with 23-bit high-resolution encoders for extreme precision.
- PC Software: You can fine-tune this drive on your computer using the InoServoShop software tool.
-
- Manufacturer: HITECH
- Model / Part Number: PWS6500S-S
- Screen Size: 4.7 inches diagonally
- Display Type: Mono STN LCD screen showing 16 shades of blue
- Resolution: 240 x 128 pixels
- Processor: 32-bit RISC high-speed processor
- Memory: 4 MB Application Flash ROM and 512 KB RAM
- Power Supply: Requires 24V DC power
- Built-in Interfaces: It features two communication ports:
- Front Protection: Rated IP65, meaning the front face resists dust and water splashes.
-
- Manufacturer: GE FANUC
- Model / Part Number: IC693ALG223
- Number of Channels: 16 single-ended
- Supported Ranges: 4 to 20 mA, 0 to 20 mA, and 4 to 20 mA Enhanced
- Resolution: 12-bit (corresponds to 4 µA or 5 µA per step)
- Accuracy: ±0.25% at room temperature (25°C)
- Input Impedance: 250 Ohms
- Isolation: 1,500V electrical isolation between field side and PLC logic
- Update Rate: 6 milliseconds across active channels
- High-Density Inputs: Packing 16 channels into a single slot saves physical space in your PLC rack.
- Electrical Protection: The 1500V isolation prevents electrical noise and dangerous "ground loops" from damaging the main PLC processor.
- Internal Power: Consumes 120 mA from the PLC backplane's 5V DC bus.
- External Power: Requires 65 mA from a user-supplied +24V DC external power supply to power the current loops.
-
- Manufacturer: FUJI
- Model / Part Number: FRN1.5E1S-7C
- FRN: FRENIC series inverter.
- Input Voltage: 1-phase 200V to 240V AC (50/60 Hz).
- Output: 3-phase output to drive standard induction motors.
- Power Output: 1.5 kW (2 HP).
- Cooling: Built-in cooling fan.
- Interface: Integrated LED keypad with a speed control potentiometer (dial).
-
- Manufacturer: FSP
- Model / Part Number: FSP500-50FSPT
- Form Factor: Flex ATX / Mini-ITX
- Max Wattage: 500 Watts
- Efficiency Rating: 80 PLUS Platinum certified, offering highly optimized power consumption and low heat emission.
- Input Voltage: Full-range 100V–240V AC (90–264V tolerance) at 50/60Hz.
- Cooling: Equipped with an internal 40mm cooling fan.
- Built-in Protection: Features advanced electronic protection including Over Voltage Protection (OVP), Short Circuit Protection (SCP), and Line Input Fuse Protection.
-
- Manufacturer: FATEK
- Model / Part Number: FBS-14MAR2-D24
- Total I/O Points: 14 channels (Inputs + Outputs combined).
- Digital Inputs: 8 points (24VDC), where 4 of the points can handle higher-speed signals up to 10KHz.
- Digital Outputs: 6 points of Relay type (represented by the R in the model name).
- Power Supply: 24VDC operational power input (represented by the D24 suffix).
- Core Series Level: MA (Economy/Basic type core architecture).
- Expandability: On this specific 14-point model, the physical I/O layout is not expandable. You cannot click extra physical input or output expansion blocks onto the side of it.
- Communication: Features 1 built-in RS-232 or USB port for communication. This can be expanded up to 3 communication ports by using additional expansion boards.
- Time Tracking: Features an integrated real-time clock (RTC).
- Programming Software: Programmed via Fatek's standard computer software application, WinProladder.
-
- Manufacturer: FANUC
- Model / Part Number: A06B-6110-H026
- Power Output: 26 kW
- Input Rating: 106 Amps
- Input Voltage: 200–240 Volts AC (3-Phase)
- Output Voltage: 283–325 Volts DC
-
- Manufacturer: DEUBLIN
- Model / Part Number: 1109-040-388
- Rotor Connection: M16x1.5 Left-Hand (LH) thread
- Pilot Size: 18 mm (0.708")
- Housing Connection: 3/8" PT (Pipe Taper)
- Maximum Speed: 20,000 RPM
- Maximum Temperature: 71°C (160°F)
- Media Types: Water-based coolant or MQL (No air pressure allowed while spinning)
- Full-Flow Design: The inner channel is smooth and free of obstructions, ensuring that metal chips, swarf, or debris do not get trapped inside.
- Heavy Duty Bearings: Equipped with dual angular contact ball bearings to handle high-speed rotation smoothly.
- Advanced Protection: Uses a labyrinth seal system and large visual vents to keep coolant away from the internal ball bearings.
- Rugged Construction: Built with silicon carbide mechanical seals, a stainless steel rotor, and an anodized aluminum outer shell to fight off rust and wear.
-
- Manufacturer: DELTA
- Model / Part Number: DVP06XA-H3
- Series Compatibility: Delta DVP-EH3 Series
- Total Channels: 6 channels (4 inputs and 2 outputs)
- Supply Voltage: 24V DC (acceptable range is 20.4V DC to 28.8V DC)
- Response Time: 1 millisecond (ms)
- Operating Temperature: 0°C to 55°C (32°F to 131°F)
- Voltage Input Range: ±10V DC
- Resolution: 16-bit (312.5 μV)
- Input Impedance: Above 1M Ohm
- Current Input Range: ±20mA
- Voltage Output Range: ±10V DC
- Current Output Range: 0 to 20mA
- Control Registers: The module features 49 built-in 16-bit control registers.
- PLC Instructions: You must use FROM and TO instructions in your ladder logic program to read data from or write data to the module.
- Programming Tools: This hardware works seamlessly with Delta automation tools like WPLSoft or ISPSoft Programming Software.
-
- Manufacturer: DANFOSS
- Model / Part Number: 067B3344
- Valve Series: TE 5 / TES 5
- Compatible Refrigerants: R404A and R507A
- Temperature Range: -60°C to -25°C (-75°F to -15°F)
- Pressure Equalization: External equalization with a 1/4-inch flare connection
- Capillary Tube Length: 3,000 mm (about 118 inches or 9.8 feet)
- Maximum Working Pressure: 28 bar (400 psig)
- Body Material: Brass
- MOP (Maximum Operating Pressure): This specific model does not feature MOP.
-
- Manufacturer: CARRIER
- Model / Part Number: TMS910SA
- Temperature Sensor: Uses a precision Negative Temperature Coefficient (NTC) thermistor to track room temperature changes.
- Display Screen: Features a clear, easy-to-read electronic LCD display showing the room temperature (RT) and system status.
- Control Style: Digital screen interface with button adjustments for intuitive management.
- Installation: Wall-mounted hardware that bridges the gap between user preferences and the mechanical HVAC setup.
-
- Manufacturer: CARLO GAVAZZI
- Model / Part Number: RAM1A60D50
- Rated Current: 50 Amps
- Operating Voltage: 42 to 660 Volts AC
- Control Input Voltage: 4 to 32 Volts DC
- Switching Mode: Zero-cross switching (turns on when the electrical wave crosses 0V, reducing power spikes)
- Mounting Style: Panel mount with screw terminals
- Versatility: Designed to handle resistive, inductive, and capacitive electrical loads.
- Built-in Protection: Includes an integrated snubber for overvoltage protection to stop power surges.
- Visual Indicator: Features a built-in LED light to show when the control input is active.
- Touch Safety: Equipped with a clip-on cover that provides an IP20 protection rating to keep fingers safe from electrical shocks.
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1415
- Current Rating: 63 Amps
- Voltage Rating: 690 Volts AC (IEC) / 700 Volts AC (UL)
- Interrupting Rating: 200 kAIC (kilofail Amps interrupting capacity)
- Operating Class: gR (provides full-range protection for semiconductor components)
- Body Size / Frame: DIN 000 (Square body)
- Dimensions: 100 mm Length × 21 mm Width × 40 mm Height
- Terminal Type: Blade end to blade end (Visual status indicator included on top)
- Mounting Style: Stud mount with bolt-down termination
- Weight: 133.6 grams
- Standards: UL Recognized, IEC Rated, CE Marked, and RoHS Compliant.
-
- Manufacturer: BELIMO
- Model / Part Number: LRU24-S
- Power Supply: 24V AC/DC.
- Control Type: Floating Point (also known as 3-point or Tri-state control). It uses two distinct inputs to drive the valve open or closed; when no signal is sent, it holds its last position.
- Torque Output: 5 Nm (Newton-meters) of force to turn or push the valve mechanism.
- Auxiliary Switch: The "-S" at the end of the model number means it includes one built-in SPDT (Single Pole Double Throw) auxiliary switch. This is used to signal other equipment (like a pump or a light) when the valve reaches a certain position.
- LR: The product family (typically smaller, non-spring return actuators).
-
- Manufacturer: BANNER
- Model / Part Number: QS186EQ
- Sensing Range: Up to 20 meters (66 feet) in opposed mode.
- Power Input: Operates on 10 to 30 Volts DC.
- Connection Type: A 150 mm (6-inch) pigtail cable ending in a 4-pin M8 Quick Disconnect (QD) connector.
- Housing Design: Rectangular plastic shape with a standard 18 mm threaded barrel for universal mounting.
- Durability Rating: IP67 and NEMA 6 rated, meaning it is tightly sealed against dust and can handle getting wet in harsh industrial settings.
- Status Lights: Includes a bright green LED indicator to show when the power is safely turned on.
- Manufacturer Part Number: 61619.
-
- Manufacturer: AUTONICS
- Model / Part Number: LA8N-BF
- Display: 8-digit, 7-segment LCD panel with an 8.7 mm character height for clear readability.
- Input Signal Type: Universal AC/DC voltage input, which accepts signals ranging from 24V to 240V AC or 6V to 240V DC.
- Counting Speed: Maximum of 20 cps (counts per second).
- Operation Method: Count-up indicator (keeps adding numbers sequentially).
- Size & Mounting: Compact DIN size (W48mm × H24mm × L54mm) designed for standard panel cutouts.
- Environment Protection: IP66 rated front panel, making it dustproof and waterproof against low-pressure water streams.
