Showing 497–512 of 2131 resultsSorted by latest
-
- Manufacturer: Knick
- Model / Part Number: P15000H1
- Flexible Inputs: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V (terminal selectable/switchable).
- Flexible Outputs: 0 to 20 mA, 4 to 20 mA, or 0 to 10 V (switchable).
- Universal Power Supply: 20 to 253 V AC/DC
- High Working Insulation: Up to 1,000 V AC/DC with a 4 kV AC test voltage.
- Compact Footprint: Measures 12.5 mm wide, 99 mm long, and 111 mm high.
- Weight: Extremely lightweight at 0.15 kg (approx. 0.33 lbs).
-
- Manufacturer: Dungs
- Model / Part Number: GW150A6
- Adjustable Scale Range: 5 to 150 mbar (millibar).
- Maximum Operating Pressure: 500 mbar (50 kPa).
- Media Compatibility: Suitable for air, flue gases, exhaust gases, hydrogen, and standard fuel gases.
- Housing Material: Durable die-cast aluminum base with a polyamide plastic dial cover.
- Enclosure Rating: IP54 protection against dust and water splashes.
- Electrical Connection: Standard plug-in connection.
- Pressure Connection: Threaded G 1/4" inner thread located on the bottom center of the housing.
- Integrated Testing Feature: Includes a built-in metal test nipple (9 mm diameter) to check system pressure easily.
-
- Manufacturer: Fuji
- Model / Part Number: GYB401D7-RC2
- Basic Motor Type (GYB): Medium inertia design. This means it provides a good balance of control stability and speed when accelerating or slowing down heavy mechanical loads.
- Rated Speed (D): Built to rotate at a standard speed of 3,000 RPM (revolutions per minute).
- Built-in Encoder (R): Includes a high-resolution 20-bit incremental encoder to track the exact position of the motor shaft.
- Shaft & Seal Style (C): Features a straight shaft without a keyway and is built without an oil seal.
- Physical Weight: The motor alone weighs roughly 1.5 kg (3.3 lbs).
-
- Manufacturer: LS
- Model / Part Number: L7SA020A
- Power Output: 2.0 kW (2000 Watts).
- Output Current: Rated at 13.5 A continuous, with a peak capacity up to 40.5 A.
- Main Power Input: 3-Phase AC 200V to 230V (-15% to +10% fluctuation allowance) at 50/60 Hz.
- Control Power Input: Single-Phase AC 200V to 230V.
- Supported Encoders: Quadrature type incremental line driver (up to 6000 P/R) and high-resolution Serial types (19-bit/20-bit BiSS protocol).
- Frequency Response: Max 1 kHz or above, allowing for highly dynamic response times.
- Control Interfaces: Supports standard Pulse/Direction inputs, Analog voltage commands (-10V to +10V), and built-in RS-422 or USB communication.
- Physical Weight: Approximately 2.43 kg to 2.5 kg (includes built-in cooling fan).
-
- Manufacturer: MAC
- Model / Part Number: 45A-N00-DBCA-1BA
- Valve Type: 4/2-way (4 ports, 2 positions).
- Actuation: Double direct solenoid (bistable operation, meaning it holds its position until the opposite coil is energized).
- Voltage: 110V AC to 120V AC (50/60 Hz).
- Pressure Range: Rated for vacuum up to 120 PSI.
- Mounting Style: Valve less base (body only, designed to plug into a separate manifold or base block).
- Electrical Connection: Grommet entry with an 18-inch (45 cm) cable terminated with bare-end flying leads.
-
- Manufacturer: IFM
- Model / Part Number: O1D100
- Measuring Range: 0.2 meters to 10 meters (on white objects)
- Laser Class: Class 2 red laser (650 nm wavelength)
- Operating Voltage: 18 to 30 V DC
- Current Consumption: Less than 150 mA
- Outputs: 2 digital outputs (or 1 digital + 1 analog 4-20mA / 0-10V)
- Communication: IO-Link 1.1 (COM2, 38.4 kBaud)
- Protection Rating: IP67 (dust tight and water resistant)
- Operating Temperature: -10°C to 60°C (14°F to 140°F)
- Housing Material: Diecast zinc body with glass lens
- Built-in Screen: Features a 4-digit alphanumeric display with programming buttons on top for quick setups.
- Smart Filtering: Built-in background suppression ensures the laser does not get confused by shiny walls or objects behind your target.
- Flexible Windows: You can customize the scale of the analog output window to match the exact distance range your project needs.
-
- Manufacturer: DELTA
- Model / Part Number: DVP06XA-S2
- Flexible Signals: It can handle both voltage and current signals on the same unit.
- Input Ranges: Accepts voltage signals from -10V to +10V and current signals from -20mA to +20mA.
- Output Ranges: Sends out voltage signals from 0V to +10V and current signals from 0mA to +20mA.
-
- Manufacturer: DANFOSS
- Model / Part Number: 067B3347
- Model Series: TE 12 (specifically the TES 12 configuration)
- Compatible Refrigerants: R404A and R507A
- Pressure Equalization: Externally equalized with a 1/4-inch flare connection type
- Capillary Tube Length: 118 inches (3,000 mm)
- Temperature Range: -40°F to 50°F (-40°C to 10°C)
- Maximum Working Pressure: 400 psig (28 bar)
- Body Material: Brass
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1418
- Amperage Rating: 125 Amps.
- Voltage Rating: 690 Volts AC according to IEC standards, and 700 Volts AC under UL recognition.
- Interrupting Capacity: 200 kAIC, which means it can safely clear very massive electrical fault currents very quickly.
- Utilization Category: Class aR, meaning it provides partial-range, ultra-fast short-circuit protection specifically tailored for semiconductors like diodes and thyristors.
- Physical Body & Tags: Size 000 square body featuring slotted offset bolted tags designed for secure, low-resistance stud mounting.
- Energy Management: Features a pre-arc I²t energy let-through rating of 1,200 and clears at 8,500 at 660V to minimize downstream component damage. Total rated power loss during normal operation is 28 Watts.
-
- Manufacturer: ABB
- Model / Part Number: ACS880-01-246A-3
- Power Rating (Normal Duty): 132 kW (approximately 175 Horsepower)
- Power Rating (Heavy Duty): 110 kW (approximately 150 Horsepower)
- Current Rating: 246 Amps
- Voltage Range: 380 V to 415 V (3-phase input and output)
- Frame Size: R8
- Enclosure Rating: IP21 (NEMA Type 1 protection for standard indoor wall-mounting)
- Weight: 68.0 kg (149.91 lbs)
- Direct Torque Control (DTC): Built-in DTC provides precise motor speed and torque control without needing an encoder sensor.
- Harmonic Filtering: Includes a built-in choke to reduce electronic noise distortion and protect your factory grid.
- Broad Connectivity: Supports major communication protocols including EtherNet/IP, Modbus, Profibus, and Profinet.
-
- Manufacturer: CARLO GAVAZZI
- Model / Part Number: DAA01CM24
- Function Type: Delay on Operate (On-Delay)
- Supply Voltage: Multi-voltage: 24 to 240 VAC (50/60 Hz) and 24 VDC
- Time Range: Fully adjustable from 0.1 seconds to 100 hours
- Output Type: SPDT (1 Form C) electro-mechanical relay
- Contact Rating: 8 A @ 250 VAC / 5 A @ 24 VDC
- Mounting Style: Standard 35mm DIN rail mount (22.5mm Euronorm housing)
- Connection: Screw terminals
- Time Tuning: Features two front dials. Use one knob to pick your scale (like seconds, minutes, or hours) and the other knob to fine-tune the exact countdown.
- Accuracy: Features a high level of repeatability (≤ 0.2% variance) to keep your industrial automated setups timing perfectly every cycle.
- Visual Status Indicators: Built-in LED lights show you exactly what is happening. A green LED signals the unit has power, and a yellow LED flashes during timing or stays solid when the output relay triggers.
-
- Manufacturer: CAREL
- Model / Part Number: IR33F0EC00
- Power Supply: 230 Vac
- Inputs: 2 NTC or PTC probe sensors, plus 1 Digital Input (DI)
- Relay Outputs: Three distinct relays to power system components:
- Compressor Control: 8 A relay
- Defrost Control: 8 A relay
- Evaporator Fan Control: 5 A relay
- Terminal Type: Green screw terminals for wiring connections
- Visual Display: Features a bright LED interface showing current temperature, operational symbols, and system codes.
- Built-in Protection: The front panel is built for panel-mounting with an IP65 water-resistance rating.
- Audio Alerts: Features an integrated internal buzzer to flag system alarms or errors.
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1417
- Current Rating: 100 Amps
- Voltage Rating: 690 Vac (according to IEC standards) or 700 Vac (according to UL standards)
- Fuse Size: 000
- Operating Class: aR (Partial-range semiconductor protection, meaning it clears short circuits very quickly)
- Interrupting Rating (Breaking Capacity): 200 kA
- Power Loss (Watt Loss): 24.0 Watts at rated current
- Mounting Type: DIN 43653 offset bolted tags
- Visual Indicator: Features a top status indicator (Type T) that can work with a microswitch for remote fault monitoring.
-
- Manufacturer: AUTONICS
- Model / Part Number: LE4S
- Power Supply: 24–240 VAC (50/60 Hz) or 24–240 VDC
- Terminal Type: 8-pin plug
- Input Method: No-voltage NPN input
- Minimum Input Time: Selectable between 1 ms or 20 ms
- Return/Reset Time: Max 100 ms
- Control Output Type: Time-limit SPDT (Single Pole Double Throw) relay
- Contact Capacity: 5 A at 250 VAC / 30 VDC (resistive load)
- Output Modes: 10 variations including ON Delay, Interval, Flicker, ON-OFF Delay, and OFF Delay
- Time Operation: SIGNAL ON START (the timer begins when an electrical signal is received)
- Overall Time Range: Extremely wide window from 0.01 seconds up to 9999 hours
- Fine-Tuning: High-precision setting option down to 0.001-second units (for the 9.999s range)
- One-Shot Output Time: Configurable from 0.01 to 99.99 seconds
- Screen Display: 4-digit, 7-segment LCD screen with a bright backlight
- Counting Direction: Can count up or count down
- Data Protection: Includes a key-lock setting function to safely store configuration data
- Interface: Soft-touch front buttons for simple programming
-
- Manufacturer: HITECH
- Model / Part Number: PWS6600S-P
- Screen Size: 5.7 inches diagonal
- Display Type: Mono STN LCD
- Resolution: 320 x 240 pixels
- Colors: 16 shades of blue
- Brightness: 160 cd/m²
- Contrast Adjustment: Controlled via the touch panel
- Touch Panel: Analog resistive
- Processor: 32-bit RISC CPU
- Application Storage: 4 MB Flash ROM
- System Memory: 512 KB RAM
- Real-Time Clock (RTC): Built-in with a rechargeable lithium battery
- Configuration Software: Programmed using Hitech ADP (Application Development Package)
- Multi-functional Port: 26-pin connector primarily dedicated to printer outputs or specialized data processing
- Input Voltage: 24V DC ±15%
- Power Consumption: Less than 20 Watts (< 20W)
- Dimensions: 195.0 mm (W) x 145.0 mm (H) x 59.1 mm (D)
- Weight: 0.81 kg
- Front Panel Sealing: IP65 / NEMA 4 rated (water and dust resistant)
- Operating Temperature: -10°C to +60°C
- Vibration Resistance: 0.5 mm displacement, 10–55 Hz for 2 hours per X, Y, and Z axis
- Shock Resistance: 10 G, 11 ms pulses (3 times per axis)
-
- Manufacturer: HITACHI
- Model / Part Number: SX14Q004-ZZA
- Screen Size: 5.7 inches diagonally.
- Resolution: 320 (RGB) × 240 pixels (QVGA layout).
- Display Technology: CSTN-LCD (Color Color-Super-Twisted Nematic).
- Backlight: Single CCFL tube (Cold Cathode Fluorescent Lamp).
- Input Interface: Parallel TTL / RGB (Typically powered by 3.3V).
