Showing 465–480 of 2131 resultsSorted by latest
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1420
- Current Rating: 200 Amps (A) — This is the maximum amount of steady electrical current the fuse can handle safely without blowing.
- Voltage Rating: 690 Volts (V) AC for international standards (IEC) and 700 Volts (V) AC for North American standards (UL).
- Interrupting Rating: 200 kiloamps (kA) — This means it can safely stop a massive, sudden surge of up to 200,000 amps of electricity without exploding.
- Class: aR — This tells us it is a high-speed, partial-range fuse meant specifically to protect semiconductors (the brainy chips inside large electronic systems).
- Body Size: 000 (Square Body) — It has a small, square, ceramic body built to handle extreme heat.
- Mounting Style: DIN 43653 — It features flat, bladed tags with slots on the ends, meaning it is screwed or bolted directly into place onto a mounting block.
- Visual Indicator: It includes a built-in top status indicator. This acts like a tiny flag that changes or pops up to tell you visually if the fuse has blown and needs to be replaced.
-
- Manufacturer: NEC
- Model / Part Number: 121PW181
- Output Current: Designed for a 5mA electrical current.
- Compatibility: Frequently paired with specific industrial LCD models such as the NL8060BC31-42D, NL10276BC24-13, and NL8060BC31-27 series.
-
- Manufacturer: NAKANISHI
- Model / Part Number: EMCD-3000A-4M
- Angle Type Connector: The "A" in the part number stands for Angle Type. The cable connects to the back of the spindle motor at a 90-degree angle. This saves space and keeps the wire from sticking straight out, which is great for compact machines.
- Built-in Air Hose: The cable bundle includes both the electrical wiring for the motor and an integrated air hose. This hose supplies cooling and purging air to the spindle to keep dirt out and prevent overheating.
- Included Accessories: It comes standard with a protective connector cap to keep the plugs clean when they are not plugged in.
-
- Manufacturer: MEAN WELL
- Model / Part Number: DR-30-12
- Output Voltage: 12V DC. It has a small front dial (potentiometer) that lets you manually tweak the voltage from 10.8V to 13.2V if your wires are very long.
- Input Voltage Range: Wide universal input handling 85 to 264V AC. This means it can safely work in both North America (120V) and Europe (230V).
- Mounting Style: Snaps directly onto TS-35/7.5 or TS-35/15 DIN rails. This makes it super easy to install inside electrical control cabinets or breaker boxes.
- Built-in Safety Protection: Includes automatic shut-off protections for short circuits, power overloads, and over-voltages to prevent fires or broken equipment.
- Cooling: It uses "free air convection," meaning it cools itself down naturally using standard surrounding air rather than needing a noisy, mechanical cooling fan.
-
- Manufacturer: KUKA
- Model / Part Number: 00-316-581
- Function: Extension cordset cable for data and communication.
- Length: 10 meters (roughly 32 feet).
- Compatibility: Made for KUKA KRC4 and KCP4 robot controllers.
- Connection Type: Features an X19 male-to-female connector setup.
- Build Quality: Built for industrial spaces with dual-layer shielding to block electrical interference and an oil-resistant outer jacket.
-
- Manufacturer: KOYO
- Model / Part Number: TRD-N1024-RZ
- Encoder Type: Incremental (Quadrature)
- Resolution: 1024 PPR (Pulses Per Revolution)
- Body Diameter: 50 mm
- Shaft Type: 8 mm Solid Shaft
- Operating Voltage: 5 to 30 VDC
- Output Type: Push-Pull (Totem Pole)
- Max Frequency Response: Up to 200 kHz
- Ingress Protection: IP50 (Dust-proof) Note: "WD" variations feature IP65 splash protection.
- Brown: Power Supply ( +V )
- Blue: 0V (Common/Ground)
- Black: Signal Output A
- White: Signal Output B
- Orange: Signal Output Z (Index pulse)
- Shield: Ground/Floating
-
- Manufacturer: INOVANCE
- Model / Part Number: MS1H4-75B30CB-A331Z
- Power Output: 750 W (0.75 kW)
- Rated Speed: 3,000 RPM
- Maximum Speed: 6,000 RPM
- Rated Torque: 2.39 N·m
- Peak Torque: 8.36 N·m (Up to 350% peak torque capacity)
- Rated Current: 4.8 A
- Inertia Level: Medium Inertia.
- Flange Size: 80 mm × 80 mm
- Environmental Protection: IP67 degree of protection (Highly resistant to dust and water splashes, making it suitable for harsh factory environments).
- Motor Length: 117.5 mm (From the front mounting flange to the back of the casing).
- Shaft Diameter & Length: 19 mm diameter with a 35 mm shaft length.
- Mounting Hole Circle (PCD): 90 mm with 4 holes of 7 mm diameter.
- Connector Type: Easy-to-use compact connectors (rather than bulky military-spec circular plugs found on larger MS1 frames).
-
- Manufacturer: INFINEON
- Model / Part Number: BSM300GB120DLC
- Voltage Rating: 1200V. This high voltage handles spikes in industrial power lines.
- Current Rating: 300A continuous. It supports peak currents up to 600A for heavy motor startups.
- Configuration: Dual IGBT module (half-bridge) featuring low-loss IGBT2 chips and integrated EmCon freewheeling diodes.
- Package Style: Standard 62mm low-inductance industrial housing.
- Power Dissipation: Can safely handle up to 2.5 kW of total heat distribution.
-
- Manufacturer: HITACHI
- Model / Part Number: SX14Q006
- Screen Size: 5.7 inches (diagonal)
- Resolution: 320 × 240 pixels (QVGA)
- Display Technology: CSTN-LCD (Color Passive Matrix)
- Pixel Configuration: RGB Vertical Stripe
- Active Viewing Area: 115.2 mm (Width) × 86.4 mm (Height)
- Signal Interface: Parallel Data (8-bit)
- Original Backlight: Dual CCFL lamps (Cold Cathode Fluorescent Lamp)
-
- Manufacturer: FUJI
- Model / Part Number: TP-G1-CLS
- Application Type: FRENIC-Lift elevator AC drive inverter control
- Enclosure Rating: Front side is IP40 (protected against objects greater than 1mm); Rear side is IP20 (basic touch protection)
- Operating Conditions: Intended for indoor use only, within temperatures ranging from -10°C to +50°C
- Storage Environment: Can be stored safely from -25°C to +65°C
- Weight: Approximately 2 kilograms (approx. 4.4 lbs)
-
- Manufacturer: FSP
- Model / Part Number: FSP500-60EPN(80)
- Total Power: It provides up to 500 Watts of power, which is plenty for normal home or office computers, and even some budget gaming setups.
- Energy Efficiency: It has an 80 PLUS Bronze certification. This means it does not waste a lot of electricity as heat. It turns at least 82% to 85% of the power it takes into actual usable energy for your PC.
- Cooling: It uses a large 120mm fan to stay cool. The fan has a built-in thermal sensor, so it spins faster when the power supply gets warm and stays quiet when the computer is resting.
- Standard Size: It is built in the standard ATX form factor. This means it will easily slide into and screw into most normal-sized desktop computer towers.
- Safety Protections: It includes built-in safety features like Over-Voltage Protection (OVP) and Short-Circuit Protection (SCP). These guard your expensive computer parts from getting fried if there is a sudden power spike.
-
- Manufacturer: FATEK
- Model / Part Number: FBS-14MAT2-D24
- Total I/O Points: 14 Points 8 Inputs / 6 Outputs
- Power Supply: 24V DC Indicated by the -D24 suffix
- Output Type: Transistor Output 6 points total (Sink / NPN type)
- Communication: 1 Built-in Port RS-232 interface
- Real-Time Clock: Integrated Built-in RTC
- Expandability: Non-expandable I/O points are fixed for MA basic units
- High-Speed: 2 points capable of up to 100KHz.
- Medium-Speed: 2 points capable of up to 20KHz.
- Standard-Speed: 4 points with a total shared capacity of 5KHz.
- FBs: Product series name (FBs SoC-based architecture).
-
- Manufacturer: FANUC
- Model / Part Number: A06B-6117-H205
- Model Line: Alpha i Series (aiSV-20/20)
- Axis Configuration: Dual-axis (Controls 2 axes, labeled L-axis and M-axis)
- Rated Input Power: 5 kW
- Input Voltage: 283V to 325V DC (Supplied via a matching Alpha i power supply module)
- Maximum Output Voltage: 240V AC
- Output Current: 6.5A rated per axis (20 Amp peak current class capacity)
- Interface Type: FSSB (Fanuc Servo Serial Bus) Optical Fiber interface
- Cooling System: Internal cooling fan
- Height: 2.6 inches (approx. 66 mm)
- Width: 7.3 inches (approx. 185 mm)
- Length/Depth: 16 inches (approx. 406 mm)
- Weight: 12 lbs (approx. 5.4 kg)
- Compatible Controls: FANUC 0i-D, 0i-F, 16i/18i/21i Model B, and 30i / 31i / 32i series.
- Compatible Servo Motors: Typically paired with FANUC Alpha i series motors, specifically sizes like the αi2, αi4, or αi12/3000.
- Base Board: A16B-2203-0695
- Control Board: A20B-2101-0041
- Interface Card: A20B-1007-0880
- Internal Fan Part: A90L-0001-0510 (Note: A failure here triggers a "Fanuc Alarm 1" on the drive).
-
- Manufacturer: EATON
- Model / Part Number: DG4V-3-2C-M-U-H7-60
- Flow Rate: Up to 21 GPM (80 Liters/minute)
- Voltage: 24 Volts DC
- Seal Material: Buna-N (Standard nitrile rubber)
- Weight: Approximately 5.6 lbs (2.5 kg)
-
- Manufacturer: DUNGS
- Model / Part Number: VPS504S02
- Maximum Operating Pressure: 7 PSI (500 mbar).
- Testing Time: Takes 10 to 26 seconds to complete a check depending on the volume of gas trapped.
- Electrical Connection: Uses a standard 7-pole plug connection.
- Protection Rating: IP 40, meaning it is protected from small tools but not waterproof.
-
- Manufacturer: DELTA
- Model / Part Number: DVP08SM11N
- Input Capacity: 8 digital input channels (8DI).
- Power Supply: Operates on a 24VDC system with a very low power consumption of about 1 Watt.
- Response Time: Fast 10ms signal response time for quick real-time control.
- Mounting style: Standard DIN Rail mounting, which allows it to easily snap onto a metal rail inside an electrical control box.
- Size and Weight: Extremely slim and lightweight, measuring roughly 25.2 x 90 x 60 mm and weighing around 60 grams.
- Main Controllers: It is designed to plug directly into the right side of Delta’s slim main controller units (MPUs), such as the SS, SA, SX, SC, and SV series.
