Showing 433–448 of 2131 resultsSorted by latest
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0EP00
- Manufacturer: CAREL
- Model Type: IR33S0EP00 (Refrigeration / Temperature Control)
- Power Supply: 230 Vac (Switching power supply)
- Relay Output: 1 Heavy-duty 16A relay (primarily used for the compressor)
- Sensor/Probe Type: NTC (Negative Temperature Coefficient)
- Digital Inputs: 2 Programmable digital inputs
- Built-in Features: Internal buzzer and infrared (IR) receiver
- Front Dimensions: 76 mm x 34 mm (Depth: 57 mm)
- Installation/Cut-out: 71 mm x 29 mm panel mount
- User Interface: Features a clear digital display paired with explicit status icons (defrost, compressor, alarms) to quickly monitor operations.
- Hygiene Compliance: The flat front panel design aligns with standard food safety and HACCP requirements for commercial refrigeration.
- Network Integration: Supports serial communication cards to connect directly to CAREL supervising networks or Modbus protocols.
-
- Manufacturer: ABB
- Model / Part Number: ZCU-12
- Memory Unit: Requires a separate plug-in memory card, specifically the ZMU-02 or ZMU-03 module, to store drive parameters and firmware.
- Input Power: Works on standard internal 24V DC control voltage.
- Supported Protocols: Capable of handling fieldbus communication add-ons including Modbus, CANopen, and EtherCAT.
-
- Manufacturer: MAC
- Model / Part Number: 111B-611JB
- Valve Type: 3-port, 2-position (3/2-way) universal design. It can be configured as Normally Open (NO) or Normally Closed (NC).
- Control Voltage: 24V DC with an 8.5-watt power consumption coil.
- Port Size: Three 1/8" NPTF threaded female pneumatic connection ports.
- Pressure Range: Capable of handling a wide envelope from vacuum up to 150 PSI.
- Flow Capacity: Flow coefficient rating of 0.18 Cv.
- Electrical Connection: Features a rectangular DIN 43650 plug-in connector.
- Actuation Mechanism: Single direct solenoid with a monostable steel mechanical spring reset.
-
- Manufacturer: Turck
- Model / Part Number: Bi8-M18-AP6X-H1141
- Sensing Distance: 8 mm
- Barrel Size: M18 x 1 threaded barrel (18mm diameter)
- Mounting: Flush (can be embedded flat in metal without causing a false trigger)
- Output Type: 3-wire, PNP, Normally Open (NO)
- Operating Voltage: 10 to 30 VDC
- Electrical Connection: M12 x 1 quick-disconnect male plug (Eurofast)
- Housing Material: Chrome-plated brass
- Protection Rating: IP67 (dust-tight and water-resistant)
- Bi: Embeddable / Flush mounting
-
- Manufacturer: Omron
- Model / Part Number: FZ-S2M
- Resolution: 2.0 Megapixels (1600 x 1200 pixels UXGA)
- Image Sensor: 1/1.8" CCD Monochrome (greyscale)
- Frame Rate: 30 frames per second (fps)
- Shutter Type: Global electronic shutter (1/10 to 1/50,000 second speeds)
- Lens Mount: Standard C-mount
- Pixel Size: 4.4 µm
-
- Manufacturer: Mean Well
- Model / Part Number: NDR-240-24
- Output Voltage: 24V DC
- Output Current: 10A
- Rated Power: 240W
- Input Voltage Range: 90 – 264V AC or 127 – 370V DC
- Frequency Range: 47 – 63 Hz
- Typical Efficiency: 88.5%
- Ripple & Noise: ≤ 150 mVp-p
- Voltage Adjustment Range: 24 – 28V
- Built-in Active PFC: Features active power factor correction to improve energy efficiency.
- Slim Design: At just 63mm wide, it saves valuable space inside control cabinets.
- Convection Cooling: Uses a metal case designed for free air convection cooling with no fans needed.
- DIN Rail Compatible: Snaps easily onto standard TS-35/7.5 or TS-35/15 mounting rails.
- Full Protections: Includes built-in safety features against short circuits, overloads, overvoltage, and overtemperature.
- Overload Handling: Uses constant current mode protection, making it great for inductive or capacitive loads.
- Dimensions: 63mm x 125.2mm x 113.5mm (W x H x D)
- Weight: 1.0 kg (2.2 lbs)
- Working Temperature: -20°C to +70°C (Note: power output starts reduction/derating above 50°C).
-
- Manufacturer: Allen-Bradley
- Model / Part Number: 22D-D2P3N104
- Product Series: PowerFlex 40P (22D)
- Voltage Rating: 380–480V AC, 3-Phase (D)
- Current & Power: 2.3 Amps continuous output, 0.75 kW / 1.0 Horsepower (2P3)
- Enclosure Type: Panel Mount IP20 / NEMA Open Type (N)
- Interface Version: LED Display with Fault Reset Only (1)
- Filter Option: No CE Compliant Filter (0)
- Brake IGBT: Included / Built-in (4)
- Frame Size: Frame B
- Sensorless Vector Control: Delivers high torque across a wide speed range.
- V/Hz Control: Perfect for simple, general-purpose fan and pump configurations.
-
- Manufacturer: Inovance
- Model / Part Number: IT7070E
- Display Screen: A 7.0-inch LCD screen featuring 800 x 480 pixel resolution and 24-bit true color for clear, sharp imagery.
- Power Supply: Runs on a standard 24V DC power setup commonly used in industrial environments.
- Connectivity Ports: Built with rich physical communication channels including 2 x RS485 channels, 1 x RS232 port, 1 x USB mini B, 1 x USB type A, and 1 x Ethernet port.
- External Storage: Includes a dedicated SD card slot to easily handle data logging, backups, and recipe management.
- Internal Clock: Equipped with a built-in Real-Time Clock (RTC) to monitor and stamp time-sensitive process schedules.
-
- Manufacturer: Pepperl+Fuchs
- Model / Part Number: KCD2-SOT-EX2
- Operating Voltage: 24 V DC
- Mounting Type: 35 mm DIN Rail
- Indicators: Built-in LEDs to quickly show power, output status, and wiring faults
-
- Manufacturer: Danfoss
- Model / Part Number: 067G4001
- Compatible Models: Designed for TE 55 and TQ 55 expansion valve series.
- Flow Direction: Straightway (passage), meaning the fluid flows in a straight line through the body.
- Inlet Connection: 28 mm Solder / ODF (Outside Diameter Female) connection.
- Outlet Connection: 35 mm Solder / ODF connection.
- Material & Weight: Typically constructed of durable, corrosion-resistant brass/metal, weighing approximately 0.66 kg (1.46 lbs).
-
- Manufacturer: Lenze
- Model / Part Number: ESMD552L4TXA
- Power Rating: 5.5 kW (approximately 7.5 Horsepower).
- Input Voltage: 3-Phase 400V AC (standard for heavy industrial power grids).
- Output Frequency: 0 to 500 Hz (allows motors to run at very flexible speeds).
- V/Hz Control Mode: It uses standard Volts-per-Hertz control to provide stable, energy-efficient operation for standard motor tasks.
- Built-in Safety Protections: The drive monitors itself to automatically guard against short circuits, earth faults, overvoltage, motor stalling, and general overloading.
- Clear Display: Features an easy-to-read LED display on the front so operators can monitor settings and check error codes quickly.
- Smooth Ramps: Programmed acceleration and deceleration "S-ramps" stop machines from jerking when they start or stop.
-
- Manufacturer: AB
- Model / Part Number: 140M-C2E-C20
- Current Adjustment Range: 14.5 to 20 Amps. You can turn a small dial on the front to match your specific motor's full-load current.
- Frame Size: Frame C. This is a standard, compact body style designed to save space inside electrical control panels.
- Trip Class: Class 10. It is designed to cut power within 10 seconds or less if it detects a dangerous overload condition.
- Number of Poles: 3-Pole. Built to handle standard three-phase power systems.
- Mounting Type: 35mm DIN Rail. It easily snaps onto standard metal rails used inside industrial control cabinets.
- Operation Style: Rotary Handle. It uses a turn-knob pointer that clearly points to ON, OFF, or TRIP statuses.
- Thermal Protection (Overload): If the motor is working too hard and gets too hot, the internal bimetal strip bends over time and cuts the power.
- Magnetic Protection (Short Circuit): If a short circuit happens, a magnetic trip instantly cuts power to prevent electrical fires or explosions. It trips instantly at 13 times the rated current.
- Phase Loss Protection: It monitors the electricity coming in. If one of the three power lines drops out, it shuts down to prevent the motor from burning itself out.
-
- Manufacturer: Siemens
- Model / Part Number: 6ES7901-3DB30-0XA0
- Primary Function: Connects a PC to a SIMATIC S7-200 PLC.
- Interfaces: USB to RS-485 Point-to-point connection.
- Protocols: PPI (10/11 bit) Freeport mode is NOT supported by this specific USB cable.
- Galvanic Isolation: Yes Features optical isolation to protect equipment from large industrial electrical interference.
- Status Indicators: 3 LEDs Tx (green): USB data transmission.
- Rx (green): USB data reception.
- PPI (green): RS-485 data transmission.
- Cable Length: 5.6 meters (~18.4 feet) Provides flexible, long-reach connectivity.
- Weight: Approx. 300 grams Light and portable.
- Required Software: STEP 7 Micro/WIN V3.2 Service Pack 4 (SP4) or higher.
- Drivers: Drivers are built directly into the Micro/WIN software suite, so separate USB driver installation is generally not needed.
-
- Manufacturer: IFM
- Model / Part Number: CR721S
- Processor: Powerful 32-bit triple-core controller.
- Software: Programmable using CODESYS 3.5, which follows the standard IEC 61131-3 rules for industrial programming.
- Digital Inputs: 68
- Analog Inputs: 24
- Frequency Inputs: 16
- Resistor Inputs: 4
- Digital Outputs: 54
- Analog Outputs: 2
- Safety Rating: Fully certified safety controller supporting CANopen Safety protocol.
- Network Interfaces: Includes high-performance CAN interfaces (4 ports) and Ethernet (1 port) to talk to other machine components.
- Dimensions: 219 mm x 271 mm x 47 mm
- Protection Rating: IP67 (completely sealed against dust and water splashes, perfect for harsh outdoor environments).
-
- Manufacturer: INFINEON
- Model / Part Number: BSM30GP60
- Configuration: Six-pack structure. It packages six distinct IGBT chips paired alongside six rapid freewheeling diodes inside a single housing. This design creates a three-phase inverter bridge circuit capable of driving alternating current (AC) motors directly.
- Control Gate: The gate-emitter threshold voltage sits between 4.5V and 6.5V, allowing precise turn-on activation using industrial-standard gate driver electronics.
- Thermal Management: Engineered with an isolated copper baseplate. It draws heat efficiently away from the silicon chips to prevent thermal overload during heavy workloads.
-
- Manufacturer: Eaton
- Model / Part Number: M22-R10K
- Resistance: 10 kOhm (±10% linear taper)
- Power Rating: 0.5 Watts (1/2 W)
- Mounting Size: Standard 22.5 mm cutout hole
- Environmental Protection: IP66 and NEMA 4X / 13 ratings (highly resistant to dust, water, and high-vibration industrial environments)
- Wiring Connection: 3 screw-type terminals (eliminates the need for soldering)
- Global Certifications: CE, UL, CSA, CCC, and GoST-R compliant for worldwide deployment
