Showing 385–400 of 2131 resultsSorted by latest
-
- Manufacturer: BANNER
- Model / Part Number: QS18VN6FF100
- Sensing Method: Fixed-Field Background Suppression. This means the sensor focuses tightly on a set zone and ignores objects that are farther away in the background.
- Sensing Range: 100 mm (approx. 4 inches) cutoff point.
- Output Type: Complementary Solid-State NPN. It features both Light-ON and Dark-ON capabilities.
- Input Voltage: 10 to 30 VDC.
- Connection Type: Pre-wired with a 2-meter (6.5 ft) cable.
- Housing Style: Rectangular "universal" body with an 18 mm threaded lens barrel, allowing it to be side-mounted or nose-mounted.
- Environmental Protection: IP67 and NEMA 6 rated, making it highly dust-tight and water-resistant.
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-1.6G
- Channels: 1-channel module
- Rated Voltage: ≤ 6 V DC (up to ≤ 12 V in an on-state)
- Rated Current: 250 mA
- Maximum Surge Current: 20 kA per line based on an 8/20 μs pulse
- Leakage Current: ≤ 5 µA
- Response Time: Super-fast 1 nanosecond symmetrical / 100 nanoseconds asymmetrical
- Operating Temperature: -30 °C to 80 °C (T6 rating drops to ≤ 50 °C)
- Mounting Type: Snaps directly onto standard 35 mm DIN mounting rails.
-
- Manufacturer: OMRON
- Model / Part Number: S82K-05024
- Input Voltage: 100 to 240 Volts AC (Universal input)
- Output Voltage: 24 Volts DC (Adjustable)
- Output Current: 2.1 Amperes
- Power Rating: 50 Watts
- Mounting Style: DIN Rail (it clips onto a standard metal rail inside electrical boxes)
-
- Manufacturer: MAC
- Model / Part Number: 167B-121JB
- Valve Function: 3-Way Normally Closed (N.C.) inline operation.
- Port Size: Three 1/4" BSPP (British Standard Pipe Parallel) threaded female pneumatic ports.
- Electrical Connection: Rectangular DIN 43650 plug-in connector.
- Dimensions: 61mm Height x 25mm Width x 89mm Depth.
- Operating Temperature Range: -18 °C to +60 °C.
- MACSOLENOID Technology: Uses a patented design that prevents coil burnout on alternating current (AC) power supplies.
-
- Manufacturer: KINCO
- Model / Part Number: G070E
- Display Size: 7 inches TFT widescreen
- Resolution: 800 × 480 pixels
- Colors: 16.77 million true colors
- Memory: 128 MB NAND Flash memory + 128 MB DDR3 RAM
- Power Supply: 24V DC input voltage
- Built-in Ethernet: Features a 10/100M self-adaptive Ethernet port to connect to local networks and PLCs.
- Serial Ports: Includes 3 COM ports supporting RS232, RS485, and RS422 communication styles simultaneously.
- Expansion: Contains a USB Host port for uploading/downloading software programs via USB flash drives.
- Programming Software: Programmed using Kinco's free Dtools configuration software.
- External Size: Approximately 20.4 cm × 15.0 cm × 3.7 cm
- Front Panel Rating: IP65-rated waterproof and dustproof front boundary.
-
- Manufacturer: HITECH
- Model / Part Number: PWS6620T-N
- Display Type: 5.7-inch TFT color touch screen display.
- Resolution: 320 x 240 pixels.
- Color Depth: 64,000 colors.
- Input Interface: Analog resistive touch screen.
- Communication Ports: 2 Serial COM ports supporting RS232, RS422, and RS485 communication protocols.
- Protection Rating: IP65 rated front panel, making it dust-tight and resistant to water splashes in tough factory environments.
- Software: This panel is traditionally programmed using ADP software (often ADP6), which is the standard software suite for the older Hitech PWS series.
-
- Manufacturer: FSP
- Model / Part Number: FSP650-80GLC
- Max Output Power: 650 Watts continuous power.
- Form Factor: Standard ATX / EPS12V.
- Input Voltage: 100V – 240V AC automatic selection (Active PFC).
- Efficiency: 80Plus certified design (built to keep heat generation low).
- Cooling: 1 x 12V DC internal smart thermo-controlled fan with a built-in "Noise Killer" to balance airflow and sound.
- Safety Protections: Includes built-in defenses against Over-Voltage (OVP), Over-Current (OCP), and Short Circuits.
- Motherboard: 1 x 24-Pin ATX connector.
- CPU Power: 1 x 8-Pin and 1 x 4-Pin 12V connectors.
- Graphics Card (PCIe): 1 x 6-Pin and 1 x 8-Pin (6+2) PCIe connectors (Nvidia SLI / AMD Crossfire ready).
- Peripherals: 5 x 4-Pin Molex (IDE) connectors, 2 x SATA connectors, and 1 x Floppy drive connector.
-
- Manufacturer: FATEK
- Model / Part Number: FBS-16RTD
- Total Channels: 16 channels, meaning it can connect to 16 separate sensors.
- Wiring Method: Uses a 3-wire connection for each sensor. This is helpful because it automatically ignores the natural electrical resistance of long wires, keeping your readings accurate.
- Built-in Smoothing: Features a software "moving average" filter to stop the numbers from jumping around erratically if there is electrical noise.
- Power Supply: Runs on a standard 24V DC power setup.
-
- Manufacturer: DELTA
- Model / Part Number: DVP08XN211R
- Output Type: It features 8 relay channels, allowing it to handle both alternating current (AC) and direct current (DC) loads.
- Electrical Load Capacity: Each relay can handle a maximum resistive load of 2.0 Amps at 250 Volts AC (50/60Hz) or 30 Volts DC.
- Power Supply: The module itself requires a 24VDC power input to function and consumes very little energy (about 1.2 Watts).
- Mounting: It features standard DIN rail mounting for quick assembly inside industrial electrical panels.
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1370
- Amperage: 200 Amps
- Voltage Rating: 690V (according to IEC standards) / 700V (according to UL standards)
- Interrupt Rating: 200 kA (it can safely stop massive short circuits)
- Class: aR (this means it is a semiconductor protection fuse designed to blow incredibly fast)
- Body Style: Square body with blade ends for easy mounting
-
- Manufacturer: CARLO GAVAZZI
- Model / Part Number: DCB51CM24
- Wide Time Range: Adjusts anywhere from 0.1 seconds all the way up to 100 hours across 7 different selectable ranges.
- Universal Power Supply: Works with 24 V DC and 24 to 240 V AC, making it highly flexible for different electrical setups.
- Output Relay: Features 1 SPDT (Single Pole Double Throw) relay rated for 5 Amps.
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0LN00
- Power Supply: 12 to 24 Volts AC/DC (50/60Hz)
- Outputs: 1 relay output rated at 16A (typically used to control the compressor)
- Inputs: 1 NTC temperature sensor probe input
- Physical Dimensions: Front size is 76×34 mm with a depth of 65 mm. It requires a 71×29 mm panel cutout for mounting.
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1468
- Amperage Rating: 125 Amps
- Voltage Rating: 690 Volts AC (IEC standard) / 700 Volts AC (UL standard)
- Interrupting Rating: 200 kAIC (meaning it can safely stop very massive short-circuit currents)
- Body Size: Size 000 with offset bolted tags for easy mounting
- Class: aR (provides ultra-fast "partial range" protection specifically for semiconductors)
-
- Manufacturer: BANNER
- Model / Part Number: QS18VN6CV45
- Sensing Method: Convergent mode (focuses a visible red LED light beam at a precise point).
- Focal Point / Sensing Distance: Fixed at 43 mm (about 1.7 inches).
- Input Voltage: 10 to 30 V DC.
- Output Configuration: Complementary solid-state NPN (Light-ON or Dark-ON operation).
- Connection Type: Pre-wired 2-meter (6.5 feet) cable with bare-end wires.
- Environmental Protection: IP67 and NEMA 6 rated housing, meaning it is dust-tight and waterproof.
- Mounting: Standard M18 threaded nose mount.
-
- Manufacturer: KINCO
- Model / Part Number: G070
- Display: 7-inch TFT screen with an 800×480 pixel resolution and a rich 16.7 million color display.
- Processor: Powered by a 32-bit ARM RISC 800MHz industrial-grade CPU.
- Memory: Equipped with 128MB of NAND Flash Storage and 128MB of DDR3 RAM.
- Hardware Port Features: Includes a built-in Real-Time Clock (RTC), 1 USB Host port, and 1 Micro USB programming download port.
- Software: Programmed using Kinco's standard DTools configuration software.
-
- Manufacturer: INOVANCE
- Model / Part Number: IS620FT3R5I
- Power Output: 1.0 kW (Kilowatt)
- Input Voltage: Three-phase 380V to 440V AC (+10% to -15%), 50/60 Hz
- Rated Current: 3.5 A
- Maximum Peak Current: 8.5 A
- Resonance Suppression: Built-in adaptive notch filters and damping filters automatically eliminate mechanical vibration.
