Showing 401–416 of 2131 resultsSorted by latest
-
- Manufacturer: FSP
- Model / Part Number: FSP600-80PSA(SK)
- Industrial Build: It is made to work inside hot rooms up to 122°F (50°C) without breaking down.
- Built-in Protection: It automatically shuts off if it detects too much power, too much voltage, or a short circuit to save your hardware.
- Form Factor: Standard ATX.
- Power Output: 600 Watts.
- Voltage Input: Works on standard wall power outlets worldwide (100V to 240V).
-
- Manufacturer: DELTA
- Model / Part Number: DVP08XM211N
- Module Type: Digital Input Expansion Module
- Input Points: 8 Inputs (Digital Only, No Outputs)
- Voltage Rating: 24 VDC
- Power Consumption: 0.5W Max (Power is typically derived directly from the main PLC unit)
- Mounting Style: DIN Rail or Chassis Mount
- Termination: Plug-in terminal blocks
- Dimensions: 90 mm (Height) x 60 mm (Depth)
-
- Manufacturer: CARLO GAVAZZI
- Model / Part Number: DBB01DM24
- Product Type: True Delay on Release Timer (True Off-Delay).
- Time Range: 0.1 seconds to 600 seconds (10 minutes), divided into 4 selectable ranges using built-in DIP switches. You can fine-tune the exact time within your chosen range using a front knob.
- Supply Voltage: 24 to 240 VAC/DC, giving it a multi-voltage capability that works with both alternating current and direct current industrial power supplies.
- Output Configuration: DPDT (Double Pole Double Throw) relay output rated for 8 Amps at 250 VAC. This means it can control two separate electrical paths at the same time.
- Mounting style: Built for a standard 22.5 mm Euronorm industrial DIN-rail housing with secure screw terminal connections.
- Diagnostic Features: Includes a clear LED light indicator on the front panel to show when the power supply is actively on.
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0ER00
- Power Supply: 230V AC (50/60 Hz)
- Output Relay: 1 relay output (8A) typically used to control a compressor, heater, or fan
- Sensor Input: 1 input designed for an NTC probe (Negative Temperature Coefficient)
- Physical Size: Front panel is 76 x 34 mm, with a standard panel cutout/drilling template size of 71 x 29 mm.
-
- Manufacturer: BUSSMANN
- Model / Part Number: 170M1467
- Current Rating: 100 Amps
- Voltage Rating: 660 Volts AC (IEC) / 700 Volts AC (UL)
- Body Style: Square body with offset bolted tags (Size 000)
-
- Manufacturer: Sharp
- Model / Part Number: LQ104V1DG51
- Screen Size: 10.4 inches (diagonal measurement).
- Resolution: 640 × 480 pixels (VGA quality).
- Interface: Parallel RGB (6-bit data, using a 31-pin connector).
- Backlight: Dual CCFL (Cold Cathode Fluorescent Lamp) tubes.
- Surface Treatment: Anti-glare coating with a 3H hard scratch resistance layer.
- Working Temperature: Built for tough environments, it functions from -20°C to +70°C (-4°F to 158°F).
-
- Manufacturer: SMC
- Model / Part Number: MHZJ2-10D
- Gripping Force: Approximately 17 Newtons (N) when closing and 19.8 N when opening at 72 psi.
- Stroke Length: 4 mm of total finger movement.
- Operating Pressure: 29 psi to 102 psi (0.2 to 0.7 MPa).
- Repeatability: ±0.01 mm for highly precise, repetitive tasks.
- Port Size: M3 x 0.5 female threads for air line connections.
- Temperature Range: 14°F to 140°F (-10°C to 60°C).
- Linear Guide Rails: The finger mechanisms travel along a built-in guide rail. This prevents the fingers from twisting or shaking under heavy loads.
- Flexible Mounting: The square body has screw holes on three different sides. You can bolt it down in five different position styles depending on your machine layout.
- Auto-Switch Ready: The outer housing features specialized slots. You can slide magnetic sensors (like the SMC D-M9 series) into these slots to let your main computer know if the gripper is currently open or closed.
-
- Manufacturer: Puls
- Model / Part Number: QS5.241
- Power Output: 24V DC (adjustable between 24–28V) at a continuous 5 Amps (120 Watts).
- Bonus Power (BonusPower): It provides 150% peak load capacity (up to 180W for 4 seconds) to safely start heavy industrial loads.
- Reliable Connections: Equipped with quick-connect spring-clamp terminals for fast, vibration-proof wiring.
- Status Monitoring: Features an integrated DC-OK relay contact to easily signal status to control systems like a PLC.
-
- Manufacturer: Pepperl+Fuchs
- Model / Part Number: KFU8-UFC-EX1.D
- Input: It reads digital input signals from NAMUR sensors or simple mechanical switches (dry contacts). It can handle a wide frequency range from 1 mHz all the way up to 5 kHz.
- Output: It provides a standard analog current output of 0/4 mA to 20 mA. It also features two relay outputs and one transistor output to trigger alarms or shut down machines.
- Power Supply: It has a universal power pack, meaning it can run on multiple kinds of electricity (20–90 V DC or 48–253 V AC).
- Setup: You can easily program it by using the physical buttons and small screen on the front panel, or by plugging it into a computer using PACTware configuration software.
- Installation: It snaps directly onto a standard 35 mm DIN mounting rail inside an electrical control panel.
-
- Manufacturer: Norgren
- Model / Part Number: 2636000
- Valve Type: 5/2-way (5 ports, 2 positions)
- Actuation / Return: Solenoid / Air Spring (Indirectly operated via a pilot valve)
- Port Size: G 1/4 inch threaded connection
- Operating Pressure: 1 to 10 bar (14.5 to 145 psi)
- Flow Rate: 1,200 liters per minute (l/min)
- Switching Time: Fast 20 milliseconds response time
- Body Material: Anodized aluminum housing with nitrile rubber (NBR) seals
- Media: Compressed air (filtered, lubricated, or non-lubricated)
-
- Manufacturer: Leadshine
- Model / Part Number: LSP-360-24
- Output Voltage: 24 VDC
- Continuous Output Current: 15 Amps
- Peak Output Current: 27 Amps (built to handle high-demand motor starts)
- Total Rated Power: 360 Watts
- Physical Dimensions: 215mm x 115mm x 30mm
- Weight: 700.5 grams (about 1.54 lbs)
- High Overload Capacity: It can briefly handle up to 1.8 times its normal load to handle the high electrical surges caused when motors suddenly move or change direction.
- Slim Design: The compact design saves space inside industrial electrical enclosures.
-
- Manufacturer: Eaton
- Model / Part Number: MTL5314
- Channels: One input channel providing two independent, configurable alarm outputs.
- Input Signal Range: 0 to 24mA, accommodating over-range signals.
- Input Resistance: 25Ω maximum.
- Transmitter Voltage: Greater than 17V available at 20mA (across terminals 1 and 2).
- Trip-Point Adjustment: Adjustable via multi-turn potentiometers on top of the module, covering a range of 0.5 to 22mA.
- Trip-Point Temperature Drift: 1.5µA/°C maximum.
- Response Time: Fast action under 75 milliseconds.
- Safe-Area Output: Two single-pole, changeover relay contacts rated at 250V AC (2A) or 40V DC (2A resistive).
- Supply Voltage: Operates on a 20 to 35V DC rail.
- Field Equipment Location: Zone 0, IIC, T4–T6 hazardous areas (or Class I, Division 1, Groups A–D).
- Series Connection: The input can be looped in series with the hazardous side of an MTL5541 repeater power supply. This extracts dual trip alarms directly from the transmitter path without breaking the signal loop.
- HART Pass-Through: Looping the transmitter loop through terminals 1 and 3 does not degrade or disrupt HART® digital communications.
- LED Status Indicators: Features a green LED for system power and a yellow status LED for each trip relay (illuminated when the relay is energized/not tripped).
-
- Manufacturer: Siemens
- Model / Part Number: 6SL3130-7TE21-6AA3
- Series: SINAMICS S120
- Type: Active Line Module (ALM)
- Form Factor: Booksize (a compact shape designed to line up neatly in electrical cabinets)
- Input Voltage: 3-Phase 380V to 480V AC (at 50/60 Hz frequency)
- Output Voltage: 600V DC
- Current Rating: 27 Amps
- Power Rating: 16 kW
- Cooling System: Internal air cooling
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-E740-5.5K-CHT
- Input Power: Three-phase AC, 380V to 480V at 50/60Hz.
- Output Power: Three-phase AC corresponding to input voltage, with a rated capacity of 9.1 kVA.
- Smart Motor Control: Uses advanced magnetic flux vector control.
- Built-in Dial: Includes a physical control wheel on the front panel. You can use this to quickly change motor speeds or modify settings right on the machine.
- Expandable: Features a built-in USB port for computer setup and a slot to insert option cards for specialized industrial networks (like CC-Link).
-
- Manufacturer: Lenze
- Model / Part Number: E84AVSCE1834VX0
- Rated Output Current: 40 Amps.
- Output Frequency Range: 0 to 599 Hz.
- Enclosure Rating: IP20 (must be housed in a control panel).
- Onboard Inputs/Outputs: 4 digital inputs, 1 digital output, 1 analog input, and 1 analog output.
- Built-in Network Capabilities: CANopen communication is included on the base board. It can expand to support EtherCAT, PROFINET, or PROFIBUS through separate modules.
- Weight: 12 kg (roughly 26.4 lbs).
-
- Manufacturer: Fatek
- Model / Part Number: FBs-2DA
- Output Channels: 2 separate channels.
- Signal Types: It can output Voltage (-10V to +10V or 0V to 10V) or Current (-20mA to +20mA or 0mA to 20mA).
- Resolution: 14-bit, which gives you very precise steps.
- Signal Precision: It moves in tiny steps of 0.3mV for voltage and 0.61µA for current.
- Power Requirement: Requires an external 24V DC power supply.
