Showing 161–176 of 1316 results
-
REQUEST A QUOTE
- Product Family: PanelView 800
- Display Size: 7-inch Wide TFT Active-Matrix Color LCD
- Resolution: 800 × 480 WVGA pixels
- Color Depth: 65,536 colors (65K)
- Backlight: LED (40,000-hour minimum lifespan)
- Input Type: Analog resistive touchscreen
- Processor & OS: Windows CE 6.0
- Memory: 256 MB RAM / 256 MB Internal Storage
- Input Voltage: 24V DC (0 – 24 VDC operating range)
- Environmental Protection: IP65, NEMA 4X, NEMA 12, NEMA 13 (Front of panel)
Brand New ALLEN-BRADLEY 2711R-T7T Touch Screen. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Rockwell Automation / Allen-Bradley
- Part Number / MPN: 440N-Z21W1PH
- UPC: 612598472529
- Switch Type: Magnetically Coded Non-Contact Interlock
- Housing Design: Plastic Small Rectangular Flat Pack
- Safety Contacts: 2 N.C. (Normally Closed) Safety
- Auxiliary Contacts: 1 N.O. (Normally Open) Aux (1 PNP Aux)
- Output Type: Solid State Relay
- Actuator Included: Standard Actuator / Standard Code
- Connection Type: 6-Inch Pigtail Cable with 8-Pin Micro (M12) DC Quick Disconnect (QD)
Brand New ALLEN-BRADLEY 440N-Z21W1PH Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Operating Voltage: 220V AC (Acceptable range: 200V to 240V AC), 50/60 Hz
- Contact Rating: 5A at 250VAC (Resistive load)
- Pin Configuration: 8-Pin circular plug-in base (typically mounts to a PF083A socket)
- Timing Series (NB): 4 Selectable Ranges: 0–3 seconds, 0–30 seconds, 0–3 minutes, 0–30 minutes
- Dimensions: 50mm × 40mm × 82mm / 1.97" × 1.57" × 3.23" (W × H × D)
- Certifications: CE certified, UL / C-UL recognized, RoHS compliant
- DIP Switch Range Adjustment: The "NB" designation identifies the specific time-scale assortment. Users can configure the hidden DIP switches on the side or bottom of the housing to switch the faceplate's scaling dynamically between seconds (S) and minutes (M).
- A/B Operating Modes: A built-in slide switch allows the operator to alternate between two distinct contact behaviors:
- Mounting Adaptability: Out of the box, it is designed for surface mounting or standard DIN-rail mounting via an 8-pin base socket. It can also be flush-mounted into a control panel cutout using a standard Type Y-40 adapter.
Brand New ANLY AH3-NB AC220V Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: APC by Schneider Electric
- Model Number: AP9335TH
- Connector Type: RJ-45
- Cable / Cord Length: 3.9 meters (approx. 13 feet)
- Product Color: Black
- Standard Warranty: 2-year repair or replacement
- Operating Temperature Range: 0 to 55 °C (32 to 131 °F)
- Operating Relative Humidity: 0 to 95% (Non-condensing)
- Operating Altitude: 0 to 10,000 feet (0 to 3,048 meters)
- Storage Temperature Range: -15 to 65 °C (5 to 149 °F)
Brand New APC AP9335TH Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Temperature Sensor: NTC Thermistor
- Control Accuracy: ±1°C
- Set Temperature Range: 5°C to 35°C
- Power Supply: 220V AC ±10%, 50Hz
- Current Load: < 2A
- Self-Consumption Power: < 2W
- Physical Dimensions: 86 × 86 × 13 mm (Fits standard 60 mm installation hole spacing)
- Power Control: Press the Power Button ( ⏽ ) once to turn the unit on, and press it again to turn it off.
- Temperature Adjustment: Press the Down Arrow (▼) button to lower the target temperature and the Up Arrow (▲) button to raise it in 1°C increments.
- Mode Selection: Press the Mode Button ( M ) to cycle through the three primary operation types displayed on the LCD screen:
- Cooling: Represented by a snowflake icon.
- Heating: Represented by a sun icon.
- Ventilation: Represented by a fan icon (operates the fan without opening the motorized valve).
Brand New YORK APC-TMS2000DA Digital Room Thermostat (APC-TMS Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Kit Type: Fluid Section / Fluid End Repair Kit
- Diaphragm Material: PTFE (Teflon) with Santoprene backup diaphragms
- Valve Ball Material: PTFE (Polytetrafluoroethylene)
- Maximum Media Intake Pressure: 120 psi (8.27 bar)
- Operating Temperature Range: 40°F to 212°F (4.4°C to 100°C)
- Country of Origin: USA
- Exhaust Safety: Before beginning disassembly, disconnect the compressed air line and cycle the pump to safely bleed off any internal fluid and air pressure. Wear appropriate chemical-resistant Personal Protective Equipment (PPE).
- Orientation is Key: When installing the split-layer diaphragms, ensure the side marked "Air Side" faces inward toward the air motor cap, while the smooth PTFE face handles the aggressive fluid side.
- Torque Settings: Do not over-tighten fluid caps or diaphragm nuts, as this will crush or pinch the PTFE O-rings, leading to immediate leaks. Always cross-torque wetted bolts incrementally using a manual torque wrench to the exact specifications mapped out in your specific ARO Pro Series Operator Manual.
- Thread Prep: Clean off old residue and apply Loctite 271 (or the thread locker specified by your manual) strictly to the diaphragm rod threads to prevent the internal assembly from spinning loose during intense pressure cycles.
Brand New ARO 637119-44-C Pump. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Prefix (EF): Explosionproof enclosure (NEMA 7, 9) featuring a zinc-plated steel conduit with 18" continuous electrical leads.
- Suffix (MS): Equipped with a screw-type manual operator override.
- Pipe Thread / Size: G 1/4" interface (with a 1/8" outlet variation depending on sub-manifold options).
- Flow Characteristics: Orifice size: 6 mm; Flow Coefficient
- Operating Pressure: 2 to 10 Bar (30 to 150 PSI).
- Standard Coil Voltage: 24V DC (Consuming approximately 6.9 Watts).
- Body Material: Anodized Aluminum.
- Environmental Safety: The EF prefix confirms it is fully certified for hazardous locations, isolating electrical sparks from combustible atmospheric dust or gases.
- Pilot Conversion Alert: If converting from internal to external piloting, note that the end cover seals must be flipped to block off the internal channel. Ensure the end cover screws are properly torqued back to exactly 2 Newton meters (Nm) (17.7 in-lbs) using a calibrated torque device to avoid structural air bypass.
- Media Requirements: The media running through the valve must be clean, dry, or lubricated compressed air or inert gas. Particulate filtration (≤ 40 μm) is strongly recommended to protect the internal spool seals from premature wear.
Brand New ASCO EFG551A001MS Solenoid Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Function: 2/2-Way, Normally Closed (NC)
- Operating Voltage: 24V DC
- Port Size: G 1/2" (ISO 228/1 / BSP) female connection
- Flow Rate: 2.77 Cv / 2.40 Kv
- Operating Pressure: 0.3 to 10 Bar (Requires a minimum 0.3 bar differential to function)
- Body Material: Brass
- Sealing Material: NBR / FPM (depending on the exact sub-variant)
- Electrical Connection: DIN plug connection providing IP65 ingress protection
Brand New ASCO SCE238D002 24DC Solenoid Valve (SCE238 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Valve Function: 2/2-Way, Normally Closed (NC)
- Actuation Type: Solenoid – Pilot Operated (Built-in Pilot, Floating Diaphragm)
- Port Size / Type: G 1/2 in (ISO 228/1 standard BSP threads)
- Orifice Diameter: 12 mm
- Body Material: Brass
- Seal Options: NBR (Standard option) or FPM / Viton
- Operating Pressure: Min: 0.3 bar (4.35 psi) | Max: 10 bar (145 psi)
- Temperature Range: -10°C to 85°C (14°F to 185°F)
- Operating Voltage: 24V DC
- Power Consumption: 6.9 W (DC holding power)
Brand New ASCO SCE238D002 24VDC Solenoid Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 7.0 inches (diagonal)
- Resolution: 800 × 480 pixels (WVGA) at approximately 133 PPI
- Display Type: a-Si TFT-LCD, LCM module
- Backlight: Integrated WLED system with an included LED driver
- Contrast Ratio: 500:1 (Typical)
- Touchscreen: None (This is the display panel only; it does not include a touch digitizer layer)
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
Brand New AUO A070VW05 V0 TFT-LCD Display Panel (A070VW05 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 10.1 inches (Diagonal)
- Native Resolution: 800 × 480 pixels (WVGA)
- Pixel Arrangement: RGB Vertical Stripe
- Display Mode: TN, Normally White, Transmissive
- Interface Type: Parallel RGB (1-channel, 6-bit)
- Color Support: 262K colors
- Luminance (Brightness): 180 cd/m² (Typical)
- Contrast Ratio: 400:1 (Typical)
- Response Time: 12 ms / 18 ms (Rising/Falling)
- Viewing Angles: 65° / 65° / 45° / 65° (L / R / U / D)
Brand New AUO A101VW01 V.1 LCD Screens. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 15.0 inches (Diagonal)
- Native Resolution: 1024 × 768 (XGA, 4:3 aspect ratio)
- Pixel Configuration: RGB Vertical Stripe
- Display Mode: TN, Normally White, Transmissive
- Surface Treatment: Anti-glare, Hard coating (3H)
- Luminance / Brightness: 350 cd/m² (Nits) typical
- Contrast Ratio: 700:1 typical
- Viewing Angle: 80°/80° (Horizontal) | 80°/60° (Vertical) at CR ≥ 10
- Response Time: 5.7 ms (Rising) / 2.3 ms (Falling)
- Color Support: 262K (6-bit) or 16.2M (6-bit + FRC), 65% CIE1931
Brand New AUO G150XG01 V.2 LCD Screens. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Type: Diffuse Reflective
- Sensing Distance: 2 meters (Based on non-glossy white paper 200×200mm)
- Control Output: PNP Open Collector
- Operation Mode: Light ON (Note: The BA2M-DDTD-P variant handles Dark ON)
- Power Supply: 12–24 VDC ±10% (Ripple P-P: max. 10%)
- Current Consumption: Max. 15 mA (Max. 30 mA when the output is ON)
- Light Source: Infrared LED (850 nm modulated)
- Response Time: Max. 1.0 ms
- Sensing Target: Opaque and translucent materials
- Hysteresis: Max. 20% at sensing distance
Brand New AUTONICS BA2M-DDT-P Diffuse Reflective Photoelectric Sensor (BA2M Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Type: Diffuse Reflective
- Sensing Distance: 100 mm (3.937 in)
- Sensing Target: Opaque, Translucent
- Light Source: Infrared LED (850 nm)
- Power Supply: 12–24 VDC
- Response Time: Max. 1 ms
- Current Consumption: Max. 30 mA
- Control Output: Open Collector
- Operation Mode: Light-ON / Dark-ON
- Protection Circuit: Multi-Protected
Brand New AUTONICS BR100-DDT Photoelectric Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
The Autonics BX700-DFR is a universal AC/DC photoelectric sensor of the BX Series with a diffuse reflective sensing type and a long 700 mm sensing distance (measured against a 200 x 200 mm non-glossy white paper target). It detects opaque and translucent materials using an infrared LED light source with a 940 nm wavele
-
The Autonics BYD100-DDT is a compact diffuse reflective photoelectric sensor from the BYD Series, designed for presence and object detection in confined machine spaces. It provides a 100 mm sensing distance against opaque and translucent materials using an infrared LED light source, and is built for a 12 to 24 V DC pow
