Showing 129–144 of 229 results
-
REQUEST A QUOTE
- Rated Adjustment Range: 5 to 30 bar (indicated by the 030K prefix in the model number, where 030 signifies the upper limit of the adjustable pressure range).
- Maximum System Pressure: 250 bar.
- Operating Voltage: 24V to 250V AC/DC (supports both alternating and direct current depending on circuit integration).
- Mounting Type: Subplate / manifold mounting layout, specified by the 06I design code.
- Housing: Features a robust industrial build, typically outfitted with a white specification label and a brass hex adjustment cap for setting the microswitch trip point.
- Weight: ~1.20 kg.
- Packaging Size: 8 x 8 x 8 cm.
DNA-030K-06I TWOWAY Hydraulic Pressure Switch.
-
REQUEST A QUOTE
- Part Numbers: 400508-00062, 40050800062
- Interchange / Cross-References: 400508-00110, 400508-0062, HIFI SN25153
- Outer Diameter: 110 mm (~4.33 inches)
- Height: 145 mm (~5.71 inches)
- Material: High-efficiency filter paper with a robust steel housing
- Weight: Approximately 5 lbs (~2.27 kg)
- Equipment Type: Compatible Models
- Doosan Excavators: DX140 LC-5, DX150, DX160 W-5, DX215, DX225 LC-5, DX255 LC-5, DX260-9C, DX300 LC-5, DX340 LC-3, DX420 LC-5, DX530 LC-5 (and variants)
- Doosan Wheel Loaders: DL200, DL200-3, DL250-5, DL300-5, DL420-5
- Cranes & Specialty: Demag AC 250-5 Crane, ACX 23 RR Crane, Lefort Scrap Shear
DOOSAN 400508-00062 Fuel Filter (Doosan).
-
REQUEST A QUOTE
- Approximate Weight: 1.85–2.2 kg
- Environmental Protection: Features high dust and waterproof ratings equivalent to an IP65 classification.
- Contamination Tolerance: The wet-type solenoid allows the core moving components to be continuously lubricated by system hydraulic oil, which cushions impact and provides strong resistance against fluid contamination.
- Fluid Compatibility: Designed standard with Buna-N (NBR) seals, compatible with typical petroleum-based industrial hydraulic oils, water-glycols, and water-in-oil emulsions.
DSG-01-3C4-A110-50 YUKEN Solenoid Directional Control Valve.
-
- Manufacturer: DUNGS
- Model / Part Number: MAG.NR.200
- Voltage Options: Commonly 230 VAC (50–60Hz) or 24 VAC depending on the specific product number.
- Power Consumption: Usually around 25 Watts.
- Duty Cycle (ED): 100%, meaning it is built to stay powered on continuously without overheating.
- Weather Protection: Rated at IP54 or NEMA Type 12, which shields it against dust and splashing water.
- MVD Series: MVD 207/5, MVD 210/5, MVD 507/5, MVD 510/5
- MVDLE Series: MVDLE 207/5, MVDLE 210/5, MVDLE 507/5
- Industrial Distributors: Many regional heating and combustion equipment suppliers stock these under article numbers like Art.Nr. 213795 or PN 240311.
-
REQUEST A QUOTE
- Maximum Inlet Pressure: 360 mbar (36 kPa / 5.22 PSI) max operating pressure.
- Outlet Pressure Range: 4 mbar to 20 mbar (0.4 kPa to 2 kPa) adjustable output.
- Connection Size: Rp 3/4 threaded internal diameter inlet/outlet flanges.
- Main Valve Features: Integrated manual main volume restrictor and bypass valve.
- Electrical Standard: Configurable variants typically running at 230 VAC (50-60 Hz) or 110 VAC.
- Enclosure Rating: IP54 dust and splash protection.
- Operating Temperatures: -15°C to +70°C (5°F to 158°F).
- Approvals: Certified under European standards EN 161 (Class A, Group 2 automatic shut-off valves) and EN 88 (pressure regulators).
- Pressure Switch Combinations: Pre-assembled packages with safety cut-out switches can be acquired through Comtherm with Pressure Switch (GW150/GW50).
DUNGS MB-DLE407B01S20 Gas Combination Unit (GasMultiBloc).
-
REQUEST A QUOTE
- Part Number (MRN): 226799
- Outlet Pressure Range: 4 – 20 mbar (0.4 – 2.0 kPa)
- Nominal Diameter: DN 40 (Connection size flange dependent)
- Coil Voltage Supply: 230 VAC (50–60 Hz) [110 VAC variants available]
- Power Consumption: 60 VA
- Protection Class: IP54
- Ambient Temperature: -15 °C to +60 °C (Up to +70 °C variant-dependent)
- Closing / Opening Time: Closing: < 1 second / Opening: < 20 seconds
- Default Pressure Switch: GW 50 A5 or GW 150 A5 (depends on standard kit)
- Unit Net Weight: 6.6 kg (14.5 lbs)
DUNGS MB-DLE415B01S20 Gas Valve (GasMultiBloc).
-
- Manufacturer: DUNGS
- Model / Part Number: MB-DLE420B01S50
- Connection Size: 2" NPT or Flange (DN50)
- Operation: Single-stage gas control block
- Media Compatibility: Suitable for gases of families 1, 2, 3 (Natural gas, propane, butane) and other neutral gaseous media
- Part Number / SKU: 226805
-
- Manufacturer: DUNGS
- Model / Part Number: MB-ZRDLE415B01S20
- Model Type: Two-stage gas valve (ZR) with adjustable slow-opening behavior (-LE) and main volume restrictor (-D).
- Part Number (MRN): 226807 (frequently bundled with a GW 50 A5 pressure switch).
- Connection Size: DN 40 flange (1 ½" BSP thread matching standard gas piping).
- Maximum Inlet Pressure: Up to 360 mbar (36 kPa).
- Outlet Pressure Range: 4 to 20 mbar (0.4 to 2 kPa), which can be adjusted at the regulator.
- Electrical Power: 230 V AC operating voltage at 50–60 Hz.
- Operating Protection: IP 54 rated against dust and moisture splashes.
- Temperature Range: -15 °C to +70 °C (For liquid gas systems, do not use below 0 °C).
- MB-ZR: MultiBloc system featuring a two-stage valve design. This allows the burner to fire at a lower partial flame before stepping up to full heat.
- DLE: Equipped with a main volume restrictor (D) and an adjustable slow-opening hydraulic brake (LE) to prevent gas bursts when starting.
-
- Manufacturer: DUNGS
- Model / Part Number: VPS504S02
- Maximum Operating Pressure: 7 PSI (500 mbar).
- Testing Time: Takes 10 to 26 seconds to complete a check depending on the volume of gas trapped.
- Electrical Connection: Uses a standard 7-pole plug connection.
- Protection Rating: IP 40, meaning it is protected from small tools but not waterproof.
-
REQUEST A QUOTE
- Input Voltage: 24V DC
- Power Consumption: 26W to 29W
- Connector Type: ISO 4400 DIN 43650-A
- Duty Rating: Continuous duty (85% to 110% of nominal voltage)
- Inner Diameter (ID): 18 mm
- Length: 46.5 mm
- Encapsulation & Protection: Glass-filled nylon; IP65 weather-proof rating
- Valve Size Compatibility: Fits H-Series cartridge sizes 10, 12, 16, and 20 (up to 350 Bar)
- Common Applications: Agricultural harvesters, refuse haulers, excavators, loaders, and tractors
EATON 300AA00122A 24VDC Solenoid Valve (Vickers).
-
- Manufacturer: EATON
- Model / Part Number: DG4V-3-2C-M-U-H7-60
- Flow Rate: Up to 21 GPM (80 Liters/minute)
- Voltage: 24 Volts DC
- Seal Material: Buna-N (Standard nitrile rubber)
- Weight: Approximately 5.6 lbs (2.5 kg)
-
REQUEST A QUOTE
- Position / Configuration: 2-Way, Normally Closed (NC)
- Operation Type: Pilot-operated
- Stem Type: Equipped with a mounting stud
- Nominal Capacities: R-22: 8.0 Tons
- Max Working Pressure: 500 PSIG (34.5 bar)
- MOPD & Fluid Temp: 300 PSIG maximum operating pressure drop; 250°F (121°C) max temperature
- Refrigerant Compatibility: Approved for standard and common A1, A2L, and A3 class refrigerants
- Extended Copper Ends: The extended ODF connections allow for easy brazing installation without damaging internal components.
- Universal Coil Family: Features a single coil system architecture where one standard Emerson coil size fits all valve variations across the series. (Note: This item is sold as a valve body; the solenoid coil must be purchased separately depending on your required voltage).
- Bi-Flow Conversion Capability: It can be converted from a standard directional flow to a bi-directional flow configuration using the internal component transformation kit # KS30293.
EMERSON 200RB4T3T Solenoid Valve (200RB Series).
-
REQUEST A QUOTE
- Nominal Capacity: 12 RT (~35.2 kW)
- Compatible Refrigerants: R22, R407C
- Inlet/Outlet Connections: 5/8" ODF / 7/8" ODF (Brazed)
- Max Working Pressure: 450 psig (31 bar)
- Features: Bi-Flow capability, Externally adjustable, Modular design
- Bulb Charge: Standard, No MOP protection
- Modular Assembly & Brazing: Properly align components and protect internal parts from heat damage when brazing 5/8" and 7/8" connections.
- Sensing Bulb Positioning: Secure the bulb on a clean, horizontal suction line, typically at the 4 or 8 o'clock position to avoid oil accumulation.
- External Equalizer Line: Connect to the top of the suction line downstream of the bulb.
- Reduce superheat (increase flow): Turn stem counter-clockwise.
EMERSON TCLE12HCA Thermostatic Expansion Valve (ALCO T-Series).
-
REQUEST A QUOTE
- Valve Series: TRAE+ / TRAES Series (Features a square body and a fully interchangeable cage assembly).
- Capacity: 10 Tons (R-22 capacity rating at 100 PSI).
- Refrigerant Code: H (Specifically designed for R-22 systems, though often compatible with R-407A/C depending on application parameters).
- Charge Code: CA (Medium temperature applications).
- Connection Size: 5/8 inch ODF Inlet x 7/8 inch ODF Outlet.
- Equalizer: External equalizer for precise pressure sensing and balanced performance across varying evaporator pressures.
- Double Balanced Port Design: This architecture provides highly stable, precise superheat control even across fluctuating system loads or wide evaporator temperature ranges.
- Replaceable Power Element: Built with a stainless steel power element that can be independently replaced, lowering long-term maintenance costs.
EMERSON TRAES10HCA Thermostatic Expansion Valve (TRAE Series).
-
REQUEST A QUOTE
- Manufacturer: FESTO
- Model / Part Number: ADVU-50-25-P-A 156553
- Piston Diameter (Bore): 50 mm
- Stroke Length: 25 mm
- Mode of Operation: Double-acting (air powers both the advance and return strokes)
- Operating Pressure: 0.8 bar to 10 bar (11.6 ~ 145 PSI)
- Pneumatic Connection: G1/8 thread
- Piston Rod End: Female thread (M8)
- Cushioning: P-type (flexible elastic cushioning rings/plates at both ends to reduce impact)
- Position Sensing: Ready for proximity sensors (magnetic piston built-in)
- Operating Temperature Range: -20°C to 80°C
FESTO ADVU-50-25-P-A 156553: Piston Diameter (Bore) 50 mm; Stroke Length 25 mm; Mode of Operation Double-acting (air powers both the advance and return strokes); Operating Pressure 0.8 bar to 10 bar (11.6 ~ 145 PSI).
-
REQUEST A QUOTE
- Valve Function: 5/2-way, Bistable-Dominant (Double Pilot)
- Design Structure: Poppet Seat
- Operating Pressure: 1 to 8 bar (14.5 to 116 psi)
- Standard Nominal Flow Rate: 105 L/min
- Nominal Size / Width: 2.5 mm
- Shifting Time (Um): 9 ms (Dominating: 25 ms)
- Operating Medium: Compressed air conforming to ISO 8573-1:2010
- Ambient Temperature Range: 0°C to +60°C
- Pneumatic Connections: 5 x PK-3 barbed fittings for main ports (1, 2, 3, 4, 5) + 2 x PK-3 barbed fittings for auxiliary pilot ports (10, 12). Designed to fit 3 mm internal diameter tubing.
- Housing Material: Polymer plastic and reinforced die-cast zinc pressure casting.
FESTO JD-5-PK-3 4901 Directional Control Valve (JD Series).
