Showing 209–224 of 228 results
-
REQUEST A QUOTE
- Function: Controls the opening angle (0 to 90 degrees) of the burner's air or fuel damper.
- Torque: 1.5 Nm rated torque.
- Running Time: 4 seconds for a 90° rotation.
- Power Supply: AC 230 V.
- Internal Components: Includes 2 auxiliary switches and 2 relays.
- Housing Length: 117 mm.
- Compatibility: Controlled directly by burner control units like the Siemens LME22 series.
- BPZ: SQN72.2A4A20 SQN72.2A4A20 Actuator Actuator, 90°/4 s, 1.5Nm, 2 auxiliary switches, 2 relays, housing 117mm, AC230V.
SIEMENS SQN72.2A4A20 Damper Actuator (SQN Series).
-
REQUEST A QUOTE
- Rotational Direction: Clockwise
- Running Time: 4 seconds for a 90-degree rotation
- Torque: 1.5 Nm rated torque (holding torque of 0.7 Nm)
- Power Supply: 220–240 V AC, 50–60 Hz, 6 VA
- Switching Capacity: 7(1) A, 250 V~
- Features: Equipped with 2 auxiliary switches and 1 relay
- Origin: Made in Germany
SIEMENS SQN75.294A21B Damper Actuator (SQN Series).
-
- Manufacturer: SMC
- Model / Part Number: CXSM15-60
- Bore Diameter: 15 mm
- Stroke Length: 60 mm
- Action: Double-acting (uses air to push and pull)
- Bearing Type: Slide bearing
- Non-Rotating Accuracy: ±0.1°
- Port Size: M5 x 0.8
- Cushioning: Rubber bumper
-
REQUEST A QUOTE
- Bore Size: 16 mm
- Stroke Length: 30 mm
- Gripping Width: 98 mm when fully open; 68 mm when closed
- Holding Force: 45 N (both internal and external) at 72 psi / 0.5 MPa
- Operating Pressure: 15 to 87 psi (0.1 to 0.6 MPa)
- Port Size: M5 x 0.8
- Temperature Rating: 14°F to 140°F (-10°C to 60°C)
- Double Piston Construction: Delivers a compact profile while maintaining a significantly large holding force.
- Synchronized Parallel Motion: A rack-and-pinion design ensures both fingers travel perfectly together.
- Versatile Mounting: Supports both axial (via tapped body or through-hole) and lateral mounting configurations.
SMC MHL2-16D Air Gripper (MHL2).
-
- Manufacturer: SMC
- Model / Part Number: MHZJ2-10D
- Gripping Force: Approximately 17 Newtons (N) when closing and 19.8 N when opening at 72 psi.
- Stroke Length: 4 mm of total finger movement.
- Operating Pressure: 29 psi to 102 psi (0.2 to 0.7 MPa).
- Repeatability: ±0.01 mm for highly precise, repetitive tasks.
- Port Size: M3 x 0.5 female threads for air line connections.
- Temperature Range: 14°F to 140°F (-10°C to 60°C).
- Linear Guide Rails: The finger mechanisms travel along a built-in guide rail. This prevents the fingers from twisting or shaking under heavy loads.
- Flexible Mounting: The square body has screw holes on three different sides. You can bolt it down in five different position styles depending on your machine layout.
- Auto-Switch Ready: The outer housing features specialized slots. You can slide magnetic sensors (like the SMC D-M9 series) into these slots to let your main computer know if the gripper is currently open or closed.
-
- Brand: SMC
- Model: MSQB20R
- Series: MSQ
- Mechanism: Rack and pinion
- Body type: MSQB basic type
- Size: 20
- Cushioning: Internal shock absorber
- Pneumatic ports: M5
- Auto switches: Not fitted
- Magnet: Built in
-
REQUEST A QUOTE
- Actuation Type: 3-Position Closed Center (Double Solenoid)
- Rated Voltage: 24V DC (designated by the "-5" code)
- Mounting Style: Base Mounted (without a sub-plate unless ordered via variant -02 or -03)
- Electrical Entry: DIN Terminal with connector (designated by the "Z" code)
- Indicator & Protection: Built-in LED light and surge voltage suppressor
- Fluid: Compressed Air
- Operating Pressure Range: 0.1 to 0.7 MPa (Internal Pilot)
- Max Fluid/Ambient Temp: 50°C (122°F)
- Manual Override: Non-locking push style
SMC SY7340-5DZ 5-Port Pneumatic Solenoid Valve (SY7000 Series).
-
REQUEST A QUOTE
- Type / Operation: Solenoid Valve, Normally Closed (Nor.Close)
- Size: 15A
- Compatible Medium: Water
- Operating Voltage: 100V AC (50/60Hz) or 110V AC (60Hz) (Note: Replacement coils are also manufactured for 220V systems)
- Operating Pressure Range: 0 to 0.6 MPa
- Proof Test Pressure: 1.5 MPa
- Electrical Connection: Typically equipped with a Hirschmann style (GDM) connector
- Unit Weight: Approximately 1.15 kg (complete unit)
SUN JDSPE7-15WLIPJ Electric Solenoid Valve (JDSPE7 Series).
-
REQUEST A QUOTE
- Manufacturer: Nichiden Kogyo Co., Ltd. (Japan)
- Valve Type: Solenoid Valve
- Model/Series: SX3S
- Operating Voltage: 200V AC (Alternating Current)
- Power Consumption: 13 Watts
- Frequency: 50 / 60 Hz
- Orifice Size: 8 mm (with approximately 3/8 inch pipe connection capability)
- Construction Material: Corrosion-resistant stainless steel and copper alloy body
- High-Speed Actuation: Engineered for fast response and short activation cycles.
- Industrial Sealing: High-grade sealing performance to entirely prevent fluid leakage under pressure.
- Application Flexibility: Frequently utilized in specialized boiler control systems (such as Miura boilers), pneumatic installations, and hydraulic gas controls.
SX3S AC200V 13W NICHIDEN Solenoid Valve.
-
REQUEST A QUOTE
- Pressure Rating: 10K (Maximum continuous operating pressure of 1.0 MPa).
- Connection Interface: Wafer Type, uniquely designed to fit cleanly between both JIS 5K and JIS 10K pipe flanges without risk of pipeline misalignment.
- Body Material: ADC12 Aluminum Alloy Die-Cast—which provides a highly durable construction that is up to 50% lighter than standard cast-iron options.
- Disc (Valve Body): SCS13A Stainless Steel.
- Seat / O-Ring Rubber: EPDM.
- Fluid Temperature Compatibility: Ranges safely from -20°C to 100°C.
- Applicable Media: Suitable for static water lines, compressed air, and compressed nitrogen gas.
- Anti-Condensation Mechanism: Incorporates an austenitic stainless steel insulation yoke positioned cleanly between the body and the hand lever to drastically suppress condensation.
- Long Neck Body Structure: Specifically engineered with an extended neck length to provide optimal clearance for building-standard thermal insulation wrap without hindering hand-lever actuation.
- Low Torque Sealing: Uses a precision spherical disc and seat geometry to establish an incredibly tight seal at significantly reduced operating torques, minimizing general rubber wear.
TOYO 10ALM-N-LUE Butterfly Valve (ALM Series).
-
REQUEST A QUOTE
- Body & Bonnet Material: Cast Bronze (CAC406 / EN CC491K equivalent)
- Stem Material: Brass / Copper Alloy (C3531)
- Handle Material: Aluminum Die-Cast (ADC12)
- Pressure Rating: Class 125 / 200 WOG (Water, Oil, Gas) / 125S (Saturated Steam)
- Max Allowable Pressure: 1.2 MPa for static water below 120°C; 0.9 MPa for saturated steam
- Connection Type: Female Threaded / Screwed (NPT or BSP)
- Applicable Fluids: Water, saturated steam, and oil
TOYO 125E-BS-N Gate Valve (125 Series).
-
REQUEST A QUOTE
- Valve Type: Swing-type check valve
- Body Material: Cast Bronze (CAC406)
- Connection Type: Threaded female ports (Rc / NPT depending on region)
- Compatible Fluids: Water, saturated steam, oil, and seawater
- Saturated Steam/Vapor: 0.9 MPa (approx. 130 PSI)
- Type: Swing type; Compatible Fluid: Water / Steam; Nominal Pressure: 125; Material: [Bronze] CAC406; Supply Side Connection Type: …
TOYO 125H-BNS-N Check Valve (125 Series).
-
REQUEST A QUOTE
- Applicable Fluid: Water and hot water.
- Operating Pressure: Up to 1.0 MPa or less.
- Nominal Diameters: Available in sizes from 15A to 25A (1/2" to 1" inch).
- End Connections: Standard JIS R screw threading (compatible with P/V cores).
- Body Material: High-grade bronze (CAC406 / CAC406C) that complies with government specifications.
- BBC (Bubble Dispersion) Method: Utilizes an integrated design that stabilizes operation and prevents water entrainment discharge (water from getting caught and leaking out during venting).
- Manual Shut-down: Equipped with an integrated manual override mechanism to shut off the valve manually if required.
- Versatile Outlets: Available with female threads, union joints, or tube joints to fit varying layout requirements.
- Primary Uses: Widely installed in hot water boilers, fan coils, solar heating arrays, building pipelines, and medium-pressure storage tanks.
VENN AF-17N Air Vent Valve (AF Series).
-
REQUEST A QUOTE
- Operating Pressure Range: 0 to 1.0 MPa (Works smoothly even at zero differential pressure).
- Fluid Temperature Range: 5°C to 180°C.
- Valve Operation: Normally Closed (NC), linear motion piston type.
- Body Material: High-grade bronze/brass cast alloy (CAC408).
- End Connection: Standard female JIS Rc screw threads.
- Flexible Mounting: Can be safely installed in either a horizontal or vertical pipeline layout (for nominal diameters of 50mm or less).
- Heat-Resistant Coil: The electrical coil exterior uses an advanced thermosetting resin explicitly designed to withstand high industrial temperatures.
- Drop-in Drop-out Replacement: Maintains identical face-to-face dimensions to the older Venn PS-12 series, making retrofits seamless without re-piping.
- Sizing: 1-inch (25A) nominal pipe thread configuration.
VENN PS-22-W Solenoid Valve (PS Series).
-
REQUEST A QUOTE
- Model Type: SL-38 (Without lever), SL-38V (With lever)
- Applicable Fluids: Steam, air, gases, and liquids
- Pressure Setting Range: 0.05 to 1.0 MPa
- Max Temperature: Max 150°C (up to 225°C for steam when utilizing a release lever / SL-38V)
- End Connection: Screwed JIS Rc
- Nominal Size Options: 15A to 50A (1/2" to 2" inches)
- Hydraulic Test Pressure: 2.0 MPa
- Spring Case: Cast Bronze
- Main Body / Seat: Stainless Steel (SCS)
- Disc Tip: Stainless Steel (Metal seat type)
VENN SL-38 Safety Relief Valve (SL Series).
-
REQUEST A QUOTE
- Operation Type: Diaphragm type, Normally Open (Energized Open).
- Applicable Fluids: Water, air, inert gases, and light oils (kerosene, diesel equivalent, viscosity ≤ 20cSt).
- Pressure Range: 0 to 1.0 MPa.
- Fluid Temperature: 5°C to 60°C.
- End Connection: JIS Rc Thread (Screw-in).
- Body Material: Cast Bronze (CAC408).
- Diaphragm Material: NBR rubber.
- Coil Insulation: Class B insulation, wrapped in a heat-resistant thermosetting resin.
- Mounting Position: Supports both vertical and horizontal installation (for sizes up to 50A).
- Nominal Diameter (Size): Face-to-Face Length (L)
VENN WS-22-F Solenoid Valve (WS-22 Series).
