Showing 417–432 of 1357 results
-
REQUEST A QUOTE
- Supply Voltage: 12 → 24 V ac/dc
- Input Type: Voltage Input (0.5 → 1 V range)
- Front Dimensions: 75 × 33 mm (2.95 × 1.30 in)
- Panel Depth: 72 mm (2.83 in)
- Operating Temperature: 0°C → +50°C (32°F → 122°F)
- Control Action: On/Off Controller
- Replacement Specs: The upgrade model features 2 multi-inputs and 2 relay outputs operating on 24 Vac/dc power.
Brand New CAREL IR32W40000 Temperature Controller. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Outputs: 4 SSR (Solid State Relay) outputs, ideal for rapid cycling applications.
- Inputs: 2 Analog inputs supporting NTC, PTC, or PT1000 temperature sensors.
- Digital Inputs: 2 Digital inputs for external switch or alarm triggers.
- Power Supply: Low voltage operation accommodating 12 to 24 V AC or 12 to 30 V DC.
- Form Factor: Panel-mount design measuring standard 76.2 x 34.2mm front dimensions.
- Interface Features: Built-in internal buzzer for audible alarms and an infrared (IR) receiver for remote control compatibility.
- ST: Temperature Set Point
- RD: Temperature Differential (Hysteresis)
Brand New CAREL IR33A7LR20 Universal Electronic Controller (IR33 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: CAREL
- Model / MPN: PZXUC0E001
- Device Type: Digital Temperature Controller / PLC Temperature Module
- Display Type: Digital LED Display (typically displaying current temperature or parameter codes)
- Communication Standard: Batibus protocol compatibility
- Sensor Type: Programmable
- Cross-Compatible Series: Often integrated alongside or associated with the PZUXC1E0G1 series
- Adjusting the Temperature Set Point: Press and hold the SET button for a few seconds until the current target temperature flashes. Use the UP or DOWN arrows to adjust, then press SET again to confirm.
- Blinking Compressor Symbol: If the compressor cooling icon is flashing rapidly on your display, the unit may be locked in a Continuous Cycle Mode or a built-in anti-short cycle protection delay. To override or deactivate a manual continuous cycle, typically you press and hold both the UP and DOWN arrows simultaneously for 3 seconds.
- Functional Substitutions: Depending on your exact wiring diagram, standard CAREL parametric controllers from the broader PZU or easy logic series (such as the PZUAC0E520) are frequently substituted if a precise 1-to-1 matching unit is out of stock. Always consult your equipment's wiring schematic before executing an alternative module swap.
Brand New CAREL PZXUC0E001 Temperature Controller. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensor Type: Capacitive Proximity (TRIPLESHIELD™ high noise immunity)
- Housing Diameter: M18 (18 mm metric thread)
- Housing Material: Grey Polyester / Plastic
- Mounting Type: Flush / Embeddable (can be mounted flush in metal)
- Output Type: PNP Transistor
- Output Function: Complementary 4-wire DC (Both Normally Open [NO] and Normally Closed [NC])
- Supply Voltage: 10 V DC to 40 V DC
- Connection Type: 2-meter PVC Leaded Cable
- Visual Indicator: Integrated LED status indication
- Brown (BN): + VDC Power Supply (10 to 40 VDC)
Brand New CARLO GAVAZZI CA18CLF08PA Proximity Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Current Range: 10 to 100 A AC (Knob-adjustable setpoint)
- Power Supply: Self-powered (Draws energy directly from the measured current; no external power supply required)
- Output Type: Solid state (NPN-PNP open collector, normally open, 100 mA max)
- Connection Style: 2-wire connection
- Time Delay: Instantaneous reaction (No adjustable delay)
- Housing & Mounting: 17.5 mm width, Mini DIN-rail mounting (DIN/EN 50 022 compliant)
- Indicators: Integrated LED status indicator for Output ON
- Zero External Power Needed: Because the device is fully self-powered via the monitored line, it simplifies panel wiring and eliminates the need for standalone auxiliary power drops.
- Adjustable Setpoint: An integrated front dial/knob allows technicians to precisely calibrate the target overcurrent limit within the 10–100 A window.
- Compact Footprint: At just 17.5 mm wide, it consumes minimal space on a standard DIN rail, making it ideal for crowded industrial control enclosures.
Brand New CARLO GAVAZZI DIA53S724100AF Current Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Main Function: True RMS AC/DC Overcurrent or Undercurrent monitoring (selectable via DIP switches)
- Measuring Range: 1 to 10 A AC/DC (via integrated internal shunt)
- Supply Voltage: 115 / 230 V AC
- Output Type: 1 SPDT (Single Pole Double Throw) relay
- Contact Rating: 8 A @ 250 V AC
- Time Delay: Adjustable delay on alarm (0.1 to 30 seconds)
- Mounting Style: Standard DIN-rail mount (22.5mm housing)
- IP / NEMA Rating: IP20 (finger-safe protection)
- True RMS Measurement: Ensures highly accurate current reading and distortion protection, even when monitoring non-linear loads or electrical networks experiencing harmonic noise.
- Internal Shunt Design: Features a built-in shunt that permits direct current measurement up to 10 A without requiring external current transformers (CTs), minimizing enclosure wiring and complexity.
Brand New CARLO GAVAZZI DIB01CB2310A Current Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Mounting Type: Industrial DIN-rail (DIN/EN 50 022)
- Monitored Functions: Phase Sequence, Phase Loss
- Supply / Monitored Voltage: 208 to 480 V AC (+10% to -15%)
- Operating Frequency Range: 45 to 65 Hz (Nominal 50-60 Hz)
- Trip Range / Coil Voltage: 177 to 550 V AC
- Output Type: 1 x SPDT (Single Pole Double Throw) relay
- Contact Rating: 8 A @ 250 V AC
- Time Delay: No delay adjustment (Instantaneous reaction)
- Regenerated Voltage Detection: Detects up to 85% of nominal phase-to-phase voltage
- Operating Temperature: -20°C to 50°C (-4°F to 122°F)
Brand New CARLO GAVAZZI DPA01CM44 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Functions: Phase Loss, Phase Sequence (Detection of total/partial loss)
- Voltage Range: 380 to 600 VAC (Measures its own power supply)
- Frequency Range: 50 to 60 Hz
- Output Configuration: 1 x SPDT (Single Pole Double Throw) Relay,
- Time Delay: None (No delay adjustment available)
- Housing Width: 22.5 mm Euronorm profile
- Mounting Type: DIN-rail mounting (DIN/EN 50 022)
- IP Rating: IP20 enclosure protection rating
- Certifications: CE, CSA, UL Listed
- Regenerated Voltage Detection: The device accurately detects regenerated voltages up to 85% of the nominal phase-to-phase voltage. This ensures it can reliably trigger an outage event even when a coasting motor generates back-EMF that mimics a live phase.
Brand New CARLO GAVAZZI DPA01CM60 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Carlo Gavazzi
- Product Series: DPA01 Series (Euronorm Housing)
- Monitoring Functions: Phase Sequence, Total/Partial Phase Loss
- Nominal Voltage Range: 380 to 480 V AC (3-Phase Delta)
- Operating Frequency: 50 to 60 Hz
- Output Configuration: DPDT (Double Pole Double Throw) — 2 Relays
- Housing Width: 22.5 mm (0.89 inches)
- Mounting Type: DIN-rail installation (DIN/EN 50 022)
- IP Rating: IP20 (Finger-safe screw terminals)
- Diagnostics: LED Status Indication (Green for Power, Yellow for Relay)
Brand New CARLO GAVAZZI DPA01DM48 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Parameter: Phase Sequence & Phase Loss
- Supply/Monitoring Voltage: 380 to 415 V AC (± 15%, 50-60 Hz)
- Trip Range: 323 to 475 V AC
- Output Type: SPDT (1 Form C) relay, normally energized
- Housing Dimensions: 22.5 mm Euronorm industrial housing
- Mounting Style: DIN-rail mount (DIN/EN 50 022)
- Ingress Protection: IP20
- Operating Temperature: -20°C to 60°C (-4°F to 140°F)
- Visual Indicators: LED indicator for relay ON status
- Regenerated Voltage Detection: The DPA02CM40 can detect partial phase loss even if the spinning motor regenerates voltage back into the missing line (detects up to 85% of the nominal voltage).
Brand New CARLO GAVAZZI DPA02CM40 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Mains Voltage: 208 to 480 V AC ± 15% (Auto-detecting range)
- Output Type: 1 × SPDT (Single Pole Double Throw / 1 Form C changeover relay)
- Contact Switching Current: Max 5 A at 250 V AC
- Frequency Range: 50 Hz to 60 Hz (± 10%) sinusoidal waveform
- Reaction Time: ≤ 200 ms (Phase loss) / ≤ 100 ms (Sequence error)
- Mounting Format: Ultra-compact 17.5 mm width profile for standard DIN-rail
- LED Indicators: Green LED: Power Supply ON / Yellow LED: Output Relay Active
- Certifications: CE, UL listed, CSA approved, RoHS compliant
- Meaning of the Part Number: DPA51CM44 B104
Brand New CARLO GAVAZZI DPA51CM44 B104 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Monitored Parameters: Phase Loss & Phase Sequence
- Mains Voltage Range: 208 to 480 VAC (±15%)
- Frequency Range: 50 to 60 Hz (±10%)
- Output Configuration: 1 x SPDT (Single Pole Double Throw / 1 Form C)
- Contact Rating: 5 A @ 250 VAC
- Mounting Type: DIN-rail (17.5 mm width)
- Time Delay: No delay adjustment (instantaneous reaction)
- IP Rating: IP20 (finger-safe protection)
- Safety Certifications: UL, CSA, CE
- Phase Loss Detection: If any one of the three phases goes dead or drops below the activation threshold (<85% of the rated phase-to-phase voltage), the relay immediately de-energizes. This prevents motors from running on two phases ("single-phasing"), which leads to rapid overheating, torque reduction, and eventual motor burnout.
Brand New CARLO GAVAZZI DPA51CM44 Phase Monitoring Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Primary Functions: Phase loss and incorrect phase sequence detection
- Voltage Supply Range: 208 VAC to 480 VAC (±15%)
- Output Type: SPDT (Single Pole Double Throw) relay
- Current Rating: 5 A
- Frequency Range: 50 Hz to 60 Hz
- Mounting Style: 17.5 mm Mini DIN-rail housing
- Time Delay: None (instantaneous trip)
- Visual Indicators: LED lights for power supply status and relay output ON
- Regenerated Voltage Detection: Safely senses phase failures even when a running motor tries to feed voltage back into the missing phase line.
- Plug-and-Play Setup: Operates automatically without needing manual configuration or NFC tuning parameters.
Brand New CARLO GAVAZZI DPA51CM44B011 3-Phase Monitoring Relay (DPA51 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensor Type: Capacitive Proximity Switch (Plastic Housing)
- Housing Diameter: M30 (30.0 mm)
- Sensor Length: 63.6 mm
- Sensing Distance: 16 mm (Adjustable range)
- Output Type: NPN with Make & Break (NO + NC) switching
- Supply Voltage: 10 VDC to 40 VDC
- Current/Load Rating: 200 mA maximum
- Termination Type: Built-in PVC Cable
- Operating Temperature: -25°C to +80°C (-13°F to +176°F)
- Integrated Diagnostics: Features a built-in LED indicator to display object detection status rapidly for effortless troubleshooting and installation adjustments.
Brand New CARLO GAVAZZI EC3016NPAPL Photoelectric Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensing Technology: Capacitive with TRIPLESHIELD™ Protection
- Sensing Range: 25 mm (Adjustable from 4 mm to 25 mm)
- Installation Mount: Non-Flush / Non-Embedded
- Housing Design: Threaded Barrel, M30 x 75.6 mm
- Housing Material: Grey Thermoplastic Polyester (PET)
- Supply Voltage: 20 V to 250 V AC (50/60 Hz)
- Output Type: 2-wire Thyristor (SCR)
- Output Function: Configurable / Dual Output (Normally Open + Normally Closed)
- Connection Type: 2-meter PVC Cable
- Response Frequency: 10 Hz
Brand New CARLO GAVAZZI EC3025TBAPL Proximity Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensor Type: Inductive Proximity
- Housing Diameter: M12
- Sensing Distance: 2 mm
- Mounting Profile: Flush (Shielded)
- Output Type: PNP
- Output Function: Normally Open (NO)
- Connection Type: Cable (CAB)
Brand New CARLO GAVAZZI IA12DLF02PO Sensor. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
