Showing 321–336 of 1357 resultsSorted by latest
-
REQUEST A QUOTE
- Type: 5-Port, Single Solenoid Valve
- Voltage Requirement: 24V DC
- Port Size: 1/8 PT (Pipe Thread)
- Pilot Configuration: Internal Pilot
- Electrical Entry: Horizontal Type ("H")
Brand New MCGS DV3120-5H-01-TH Pilot Solenoid Valve (DV3120 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Size: 5.7 inches
- Resolution: 320 × 240 pixels (VGA / QVGA orientation)
- Panel Type: CSTN-LCD / TFT color display module
- Backlight Type: 1-piece CCFL (Cold Cathode Fluorescent Lamp)
Brand New MATRIX 8906-CCFL-A-A161 Industrial LCD Display Panel (8906 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- I/O Capacity: Provides 10 total I/O points.
- Digital Inputs: Includes 6-point inputs running on a 24 V DC operating voltage.
- Digital Outputs: Includes 4-point relay outputs.
- Programming & Software: Fully compatible with GMWIN software and supports standardized ladder logic configuration.
- Installation: Designed for industrial environments with flexible DIN rail or panel mounting options.
Brand New LS G7E-DR10A Digital I/O Expansion Module (GM7 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Voltage Range: 20–80 VDC (operational range is often rated up to 74VDC or 80VDC depending on the specific power supply overhead).
- Output Current: Adjustable from 2.2A to 8.3A (peak) using hardware DIP switches, or fine-tuned from 0.5A to 8.3A via PC software.
- Pulse Input Frequency: Up to 400 KHz maximum.
- Control Formats: Supports Step & Direction (PUL/DIR) or CW/CCW (double pulse) signals.
- Microstep Resolutions: 16 distinct hardware resolutions ranging from 200 to 25,600 steps/rev via DIP switches, or expandable up to 51,200 via software.
- Logic Voltage: Built-in 5V/24V logic voltage selector (defaulted to 24V) eliminating the need for external current-limiting resistors.
- Anti-Resonance: Features electronic tuning algorithms to calculate optimal torque distributions and suppress mid-range instability.
- Motor Compatibility: Explicitly optimized to drive 3-phase, 3-wire or 6-wire NEMA 23, 24, and 34 stepper motors.
- System Protections: Built-in defenses against over-voltage, over-current, and phase errors, alongside standard fault and brake outputs.
- Command Smoothing: Configurable control command filtering which smooths acceleration ramps and dampens physical machine vibrations.
Brand New LEADSHINE 3DM883 3-Phase Stepper Motor Driver (3DM Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 10.4 inches (diagonal)
- Resolution: 640 × 480 pixels (VGA format with a 4:3 aspect ratio)
- Signal Interface: Parallel RGB, 30 pins, 1-channel, 6-bit
- Input Voltage: 3.3V (Typical)
- Brightness: 400 cd/m² (Typical)
- Contrast Ratio: 300:1 (Typical)
- Original Backlight: Dual CCFL (Cold Cathode Fluorescent Lamp) tubes
- LCDQuote: Offers independent testing verification on their inventory and provides a 1-year warranty.
- CNC Tools LLC: A specialized choice if you need specific legacy firmware series variations or next-day air shipping for factory downtime emergencies.
Brand New LG LB104V03（A1） a-Si TFT-LCD Display Panel (LB104V03 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Insert Shape: C Rhombic 80° (Diamond)
- Clearance Angle: N 0° (Negative)
- Tolerances: M Standard manufacturing tolerance class
- Fixing/Chipbreaker: G Double-sided with hole and chipbreaker
- Cutting Edge Length: 12 ~12.7 mm (1/2")
- Thickness: 04 4.76 mm (3/16")
- Corner Radius: 08 0.8 mm (1/32")
- Chipbreaker Style: MS Semi-finishing to medium cutting (Medium/Stainless focus)
- Insert Grade: PR1125 TiAlN PVD-coated micro-grain carbide
- Primary Target Materials: Stainless Steel (ISO M10–M30 series) and Low-Carbon/Alloy Steels.
- Operation Range: Best suited for finishing to medium cutting depths.
- Cut Type: Performs exceptionally well in stable continuous cutting to light-to-medium interrupted operations.
- High Wear & Fracture Resistance: The premium TiAlN PVD coating yields excellent fracture toughness under low speeds or interrupted conditions.
- Reduced Built-Up Edge (BUE): The smooth PVD surface coat resists adhesion, preventing workpiece material from welding onto the cutting edge.
- Sharp Cutting Profile: Peripheral grinding gives the cutting edge low cutting resistance, which minimizes burrs and maintains highly polished workpiece finishes.
Brand New KYOCERA CNMG120408MS PR1125 Rhombic Carbide Turning Insert (PR1125 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Measuring Range: 0 to ±900 A
- Output Signal: Instantaneous voltage output of ±4 V (at nominal current)
- Accuracy: ±1% of
- Frequency Bandwidth: DC to 50 kHz (-3 dB)
- Operating Temperature: -10°C to +80°C
- Mounting Type: Panel mounting with an integrated rectangular aperture for the primary conductor.
- Housing Material: Insulated plastic case meeting UL 94-V0 safety standards.
Brand New LEM HAS300-S Hall Effect Current Transducer (HAS Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Catalog Number: E82MV302-4B151
- Series: 8200 motec
- Rated Power: 3.0 kW (4 HP)
- Input Voltage: 3-Phase 380V to 480V AC (±10%)
- Output Frequency: 0 to 240 Hz
- Control Modes: Sensorless Vector Control, V/Hz characteristic
- Enclosure Rating: IP31 / NEMA 1 (Standard indoor / protected environment)
- Cooling Type: Internal fan
- Fieldbus Options: CANopen, Modbus, DeviceNet (via plug-in modules)
- Decentralized Design: Can be installed directly onto the motor terminal box or adjacent wall, optimizing machine layouts.
- High Overload Capacity: Engineered for high starting torque and dynamic response handling.
- Braking Chopper: Features integrated braking logic to handle energy regeneration during rapid deceleration or controlled stops.
Brand New LENZE E82MV302-4B151 Decentralized Frequency Inverter (8200 motec Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Kromschröder (Honeywell)
- Part Number / Code: 84447350 (also referenced as KS84447350)
- Adjusting Range: 2.5 to 50 mbar (approx. 1 to 20" WC)
- Maximum Pressure: 600 mbar
- Media Type: Gas and Air
- Electrical Interface: Screw terminals with an M16 cable gland
- Switching Function: Automatic reset (switches with rising/falling pressure)
- Enclosure Rating: IP 54
- Temperature Range: -4°F to 176°F (-20°C to 80°C)
- Safety Certifications: Certified for systems up to SIL 3 and PL e
- DG: Gas pressure switch
Brand New KROM SCHRODER DG50U-3 Gas Air Pressure Switch (DG Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Function: Connects the KCP2 teach pendant to the KRC2 controller.
- Length: 10 meters (approx. 32.8 feet).
- Connectors: Features a 19-pin circular male connector on the controller end and interfaces with a 26-pin female layout / wire leads on the pendant end.
- Application: Typically routed via the X19 junction on KRC2 control cabinets.
Brand New KUKA 00-132-345 Teach Pendant Communication Cable (KRC2 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Processor Architecture: Built on a multi-core CPU architecture designed to process motion control calculations and PLC logic simultaneously.
- Digital Inputs: 8 digital inputs supporting high-speed configurations (up to 200 kHz) for reading encoder and pulse feedback.
- Digital Outputs: 8 transistor outputs (Transistor NPN type denoted by "TN").
- Motion Axes Control: Supports up to 8 synchronized EtherCAT axes for complex path movements like linear and circular interpolation or electronic CAM profiles.
- Network Capacities: Features a real-time EtherCAT master port capable of controlling up to 127 network slaves.
- Ethernet Communication: Dual integrated Ethernet ports supporting standard industrial protocols and programming interfaces.
- Local I/O Expansion: Compatible with up to 16 GL20 local expansion modules directly attached to the controller rack.
- Remote I/O Expansion: I/O can be expanded further across decentralized setups using the EtherCAT bus coupler GL20-RTU-ECT.
- Alternative Axis Options: Offers up to 4 pulse axes and supports an optional card configuration for up to 30 CANopen axes doing point-to-point (PTP) movements.
Brand New INOVANCE AM521-0808TN PLC Motion Controller (AM500 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Lead Time: Typically ships immediately or within a few business days depending on localized stock.
- Documentation: Official 3D CAD files, manuals, and data sheets can be downloaded directly via the Keyence CZ-H52 Product Page.
- Models: RGB Digital Fiberoptic Sensors – CZ-V20 series
Brand New KEYENCE CZ-H52 Fluorescence Detection Sensor Head (CZ-V20 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Size: 4.3 inches
- Resolution: 480 × 272 pixels (Note: Some baseline configurations share the processing architecture of the larger 800 × 480 ET070 series).
- Touch Panel Type: 4-wire precision analog resistor network with a 4H surface hardness protective layer.
- Processor (CPU): 400MHz RISC high-speed processor.
- Memory Capacity: 128MB Flash Storage + 64MB SDRAM.
- Onboard Storage: Real-Time Clock (RTC) + 512KB dedicated recipe memory.
- Programming & Expansion: Features a dedicated USB Slave port alongside serial interface options for uploading or downloading logic programs.
- PLC Compatibility: Broadly deployed alongside controllers such as the Inovance H0U/H1U/H2U/H3U series using specialized interface cables.
Brand New KINCO ET050 HMI Touch Screen Panel (eView Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Sensor Type: Capacitive Proximity
- Sensing Distance: 5.00 mm
- Mounting Style: Non-Flush Mount
- Operating Voltage: 10–30 VDC
- Output Configuration: 3-wire, NPN Normally Open (NO)
- Current Consumption: 20 mA or less (N-type)
- Standard Target Object: Grounded iron block (50 × 50 × 1mm)
Brand New KOYO CS-16-5N Capacitive Proximity Sensor (CS Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Screen Size: 5.6 inches diagonal
- Resolution: 640 × 480 pixels (VGA) with a 4:3 aspect ratio
- Display Technology: a-Si TFT-LCD, TN Mode (Normally White, Transmissive)
- Brightness: 200 cd/m² (Nits)
- Contrast Ratio: 500:1
- Signal Interface: Parallel RGB (typically a 50-pin connector)
- Backlight: White LED (WLED)
- Response Time: 10 to 15 ms
- Operating Voltage: 3.3V (Typical logic power supply)
Brand New INNOLUX AT056TN52 V.3 Industrial TFT-LCD Display Panel (AT056TN52 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Switch Type: Single-Pole, Double-Throw (SPDT)
- Connection Size: 1" MNPT (Male National Pipe Thread)
- Paddle Size: 6-inch segment paddle (interchangeable or trimmable for 1" to 6" pipe variations)
- Enclosure Rating: NEMA 1 (general purpose indoor enclosure)
- Maximum Fluid Pressure: 150 psig (1,034 kPa)
- Fluid Temperature Range: 32°F to 250°F (0°C to 121°C)
- Electrical Ratings: 120-277 VAC; 16A FLA at 120V / 8.8A FLA at 240V
Brand New JOHNSON CONTROLS F61KB-11C Liquid Flow Switch (F61 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
