Jungui Automation

Industrial Automation Products & Spare Parts

Showing 161–176 of 1357 resultsSorted by latest

  • 700-972-7BB12 Helmholz PROFIBUS DP Connector

    700-972-7BB12 Helmholz PROFIBUS DP Connector

    REQUEST A QUOTE

    • Cable Outlet: 90° vertical angled outlet, suitable for FastConnect stripping tools.
    • Interface Types: One 9-pin Sub-D connector for the station, plus one integrated 9-pin Sub-D PG connection socket to hook up programming devices or extra nodes.
    • Transmission Speed: Supports transmission rates up to 12 Mbps.
    • Terminating Resistor: Integrated resistor combination, switchable using an accessible slide switch.
    • Housing: Metalized shell to improve Electro-Magnetic Compatibility (EMC).
    • Physical Profile: Dimensions of 40 x 17 x 64 mm and weighs approximately 40 g.
    • Environmental Range: Built to operate across temperatures from -25 °C up to +85 °C with an IP20 protection level.
    • Orange LED: On when the terminating resistor is actively switched into the circuit.
    • Green LED: Indicates that bus activity is present (the network is actively transferring data).
    • Blue LED: Confirms that the addressed station is successfully participating in the bus traffic.

    Brand New Helmholz 700-972-7BB12 PROFIBUS DP Connector (700 Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • 62-58HN-8620-G13121-S010 Hein Lanz Absolute Rotary Encoder

    62-58HN-8620-G13121-S010 Hein Lanz Absolute Rotary Encoder

    REQUEST A QUOTE

    • Encoder Type: Absolute (retains position data even if power is lost).
    • Output Signal: Digital.
    • Actuator Design: Solid shaft.
    • Sensing Technology: Electromechanical/Mechanical.
    • Electrical Design: Direct Current (DC) powered.
    • Wiring & Connection: Shielded cable termination to protect against electromagnetic interference.
    • Mounting: Compatible with standard industrial surface mounting.
    • Country of Origin: Commonly manufactured and distributed out of industrial hubs in China.

    Brand New Hein Lanz 62-58HN-8620-G13121-S010 Absolute Rotary Encoder (62-58HN Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • OLV-2A Nohken Float Level Switch

    OLV-2A Nohken Float Level Switch

    REQUEST A QUOTE

    • Manufacturer: Nohken Inc.
    • Model Type: OLV-2A (OL Type Small Level Sensor)
    • Switching Ratings: Max. 50 VA AC / 50 W DC; Max. 250V AC / 200V DC; Max. 0.5 A AC / DC
    • Operating Limits: Specific gravity ≥ 0.70; Max pressure 0.5 MPa; Temp. range -10°C to +90°C; Viscosity 0.5 Pa·s Max; Vibration 100 m/s² Max
    • Materials & Wiring: Float: Polypropylene (PP); Stem/Clip: Stainless Steel; Multi-core twin flying lead wires
    • Target Application: Optimized for water applications, small tanks, automatic water boilers, and machine equipment.
    • Reversible Operation: Easily alternates between Normally Open (NO) and Normally Closed (NC) by flipping the float. Additional detailed dimensions and complete operational data can be found in the official documentation.

    Brand New Nohken OLV-2A Float Level Switch (OLV Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • BEN5M-MFR AUTONICS Retroreflective Photoelectric Sensor

    BEN5M-MFR AUTONICS Retroreflective Photoelectric Sensor

    REQUEST A QUOTE

    • Sensing Type: Retroreflective (Standard type)
    • Sensing Distance: 0.1 to 5 meters (when used with MS-2 reflector)
    • Sensing Target: Opaque material, minimum Ø60 mm
    • Power Supply: 24–240 VAC ±10% 50/60 Hz / 24–240 VDC ±10%
    • Power Consumption: Max. 4 VA
    • Light Source: Infrared LED (940 nm)
    • Response Time: Max. 20 ms
    • Operation Mode: Light ON / Dark ON (Selectable via built-in switch)
    • Control Output: Relay (SPDT contact, 1C)
    • Relay Contact Rating: 250 VAC 3A resistive load
    • Indicators: Orange (Operation Indicator), Green (Stability Indicator)
    • Connection Type: Axial 2-meter, 5-wire outgoing cable (Ø6.0 mm)
    • Protection Rating: IP50 (IEC Standard)
    • Ambient Temperature: Operating: -20°C to 65°C (Storage: -25°C to 70°C)
    • Brown: Power + / Line
    • Blue: Power – / Neutral
    • White: Common (COM)
    • Black: Normally Open (NO)
    • Gray: Normally Closed (NC)

    Brand New AUTONICS BEN5M-MFR Retroreflective Photoelectric Sensor (BEN Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • APC-TMS2000DA YORK Digital Room Thermostat

    APC-TMS2000DA YORK Digital Room Thermostat

    REQUEST A QUOTE

    • Temperature Sensor: NTC Thermistor
    • Control Accuracy: ±1°C
    • Set Temperature Range: 5°C to 35°C
    • Power Supply: 220V AC ±10%, 50Hz
    • Current Load: < 2A
    • Self-Consumption Power: < 2W
    • Physical Dimensions: 86 × 86 × 13 mm (Fits standard 60 mm installation hole spacing)
    • Power Control: Press the Power Button ( ⏽ ) once to turn the unit on, and press it again to turn it off.
    • Temperature Adjustment: Press the Down Arrow (▼) button to lower the target temperature and the Up Arrow (▲) button to raise it in 1°C increments.
    • Mode Selection: Press the Mode Button ( M ) to cycle through the three primary operation types displayed on the LCD screen:
    • Cooling: Represented by a snowflake icon.
    • Heating: Represented by a sun icon.
    • Ventilation: Represented by a fan icon (operates the fan without opening the motorized valve).

    Brand New YORK APC-TMS2000DA Digital Room Thermostat (APC-TMS Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • DSG-01-3C4-A110-50 YUKEN Solenoid Directional Control Valve

    DSG-01-3C4-A110-50 YUKEN Solenoid Directional Control Valve

    REQUEST A QUOTE

    • Approximate Weight: 1.85–2.2 kg
    • Environmental Protection: Features high dust and waterproof ratings equivalent to an IP65 classification.
    • Contamination Tolerance: The wet-type solenoid allows the core moving components to be continuously lubricated by system hydraulic oil, which cushions impact and provides strong resistance against fluid contamination.
    • Fluid Compatibility: Designed standard with Buna-N (NBR) seals, compatible with typical petroleum-based industrial hydraulic oils, water-glycols, and water-in-oil emulsions.

    Brand New YUKEN DSG-01-3C4-A110-50 Solenoid Directional Control Valve (DSG-01 Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • F3XD32-3F YOKOGAWA Digital Input Module

    F3XD32-3F YOKOGAWA Digital Input Module

    REQUEST A QUOTE

    • Input Points: 32 points
    • Input Voltage: 24 V DC (operational range: 20.4 to 26.4 V DC)
    • Input Current: 4.1 mA per point
    • Input Type: Sink/Source (DC voltage)
    • Common Terminals: 8 points per common
    • Isolation Method: Photocoupler isolation
    • External Connection: One 40-pin connector
    • On/Off Thresholds: ON state is ≥16.0 V DC (≤5.8 mA); OFF state is ≤3.2 V DC (≤0.9 mA)

    Brand New YOKOGAWA F3XD32-3F Digital Input Module (F3XD Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • YKA2811MA YAKO Stepping Motor Driver

    YKA2811MA YAKO Stepping Motor Driver

    REQUEST A QUOTE

    • Operating Voltage: AC 60V to 110V (Note: Avoid reversing power input or using incorrect logic levels without necessary inline resistors)
    • Output Current: Adjustable from 0.5A/phase to 8.0A/phase across 16 settings
    • Max Pulse Frequency: Up to 200 Kpps
    • Microstep Settings: 16 options, maxing out at 200 microsteps
    • Control Mode: Bipolar constant current wave chopping
    • Protection Features: Auto-current cut-off when the unit exceeds 70°C, plus dedicated diagnostic LEDs for Over-Current (O.C.) and Malfunctions (O.H.).

    Brand New YAKO YKA2811MA Stepping Motor Driver (YKA2811 Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • RAH2260B2-C XINRUILIAN AC Axial Cooling Fan

    RAH2260B2-C XINRUILIAN AC Axial Cooling Fan

    REQUEST A QUOTE

    • Dimensions: 220 mm × 220 mm × 60 mm (commonly categorized as a 22cm or 22060 frame size).
    • Frame Material: Heavy-duty die-cast aluminum frame.
    • Voltage Options: Most commonly found in 220V–240V AC configurations (50/60Hz), though a 100V–125V AC variant exists for lower voltage electrical grids.
    • Current Draw: 0.42A to 0.46A depending on frequency.
    • Wiring: Standard 2-wire setup, available with either terminal connectors or lead wires.
    • Bearing & Protection: Features a high-flow design typically built with high-temperature resistance suited for continuous industrial operation.

    Brand New XINRUILIAN RAH2260B2-C AC Axial Cooling Fan (RAH2260 Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • UDK2120 VEXTA Stepping Motor Driver

    UDK2120 VEXTA Stepping Motor Driver

    REQUEST A QUOTE

    • Power Supply Input: Single-Phase 100 / 115 VAC (50/60 Hz)
    • Maximum Output Current: 2.2 A per phase
    • Power Rating: 200 W
    • Excitation Modes: Full Step: 0.9°/step (2-phase excitation)
    • Half Step: 0.45°/step (1-2 phase excitation)
    • Unit Weight: 460 g
    • Compliance: RoHS Compliant
    • POWER: Illuminates when the unit is receiving power.
    • CW/PLS: Illuminates when Clockwise Pulse or Pulse signal input is active.
    • CCW/DIR: Illuminates when Counter-Clockwise Pulse or Direction signal input is active.

    Brand New VEXTA UDK2120 Stepping Motor Driver (UDK Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • 8V1016.00-2 B&R AC Servo Drive

    8V1016.00-2 B&R AC Servo Drive

    REQUEST A QUOTE

    • Input Voltage: 3-phase 400 to 480 VAC (−15% / +10%), 50/60 Hz
    • Apparent Power: 2.1 kVA
    • Rated Output Power: 0.7 kW (approx. 0.94 HP)
    • Continuous Output Current: 1.6 A to 1.2 A (RMS)
    • Peak Output Current: 5 A
    • Maximum Output Frequency: 500 Hz
    • Weight: 6.00 lbs
    • Modular Expansions: Equipped with 3 expansion slots for plug-in modules to integrate fieldbus networks (such as POWERLINK or CAN bus) and various encoder feedback interfaces (such as EnDat or resolvers).
    • Power & Performance: Features an IGBT power stage alongside a built-in multi-axis DC bus connection.
    • Built-in Components: Incorporates an integrated line filter to suppress electromagnetic interference, an integrated braking resistor, and a built-in brake chopper.
    • Integrated Safety: Features a hardware-integrated electronic safe restart interlock (inhibit function) to prevent accidental engine re-activation.
    • Certifications: Officially certified with cULus (File E225616, SCCR 65kA), CE marking, and KC certification.
    • Operating Temperature: Nominal performance ranges between 5 to 40°C, up to a maximum threshold of 55°C.

    Brand New B&R 8V1016.00-2 AC Servo Drive (8V Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • 8V1045.00-2 B&R AC Servo Drive

    8V1045.00-2 B&R AC Servo Drive

    REQUEST A QUOTE

    • Power Rating: 2 kW
    • Output Current: 4.4 A continuous (RMS) | 24 A peak
    • Mains Input Voltage: 3-phase, 400 to 480 V AC (±10%), 50/60 Hz
    • Control Power Supply: 24 V DC nominal input
    • Braking Resistor: 200 W continuous power | 7 kW peak power output
    • Expansion Slots: 4 integrated module slots for plug-in cards (such as POWERLINK, CAN bus, encoder interfaces, or digital I/O)
    • Safety Integration: Electronic secure restart inhibit / Safe Torque Off (STO)
    • Protection Class: IP20 rating

    Brand New B&R 8V1045.00-2 AC Servo Drive (8V Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • BEN7M-MDR AUTONICS Retroreflective Photoelectric Sensor

    BEN7M-MDR AUTONICS Retroreflective Photoelectric Sensor

    REQUEST A QUOTE

    • Sensing Type: Retro-reflective
    • Sensing Distance: 7 meters
    • Sensing Target: Opaque materials
    • Supply Voltage: 12–24V DC
    • Control Output: Relay contact
    • Light Source: Infrared LED
    • Operation Mode: Light ON / Dark ON
    • Indicators: Dual LED
    • Connection Type: Pre-wired Cable
    • Environmental Protection: IP54 / IP67
    • Operating Temperature: -20°C to +65°C
    • Adjustable Sensitivity: Built-in volume adjuster allows precision calibration based on background reflective materials.
    • Relay Output Flexibility: The mechanical relay configuration makes it highly adaptive for switching both AC and DC industrial loads directly.
    • Noise Immunity: Uses a specialized Autonics ASIC photodiode to minimize interference from surrounding ambient light or electrical line noise.

    Brand New AUTONICS BEN7M-MDR Retroreflective Photoelectric Sensor (BEN Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • 8BVI0220HWD0.000-1 B&R Servo Inverter Module

    8BVI0220HWD0.000-1 B&R Servo Inverter Module

    REQUEST A QUOTE

    • Inverter Channels: Two fully independent inverter channels built into a single module.
    • Current Rating: 22 A continuous output.
    • Voltage Compatibility: Supports 3-phase motor operation with a 750 VDC nominal DC bus.
    • Peripheral Connections: Direct internal connections for motor holding brakes and temperature monitoring sensors.
    • Expansion Slots: 2 slots available to receive plug-in interface or application modules.
    • Standards Compliance: Fully certified for global industrial deployment (CE, UL cULus, UKCA, KC).
    • Use Case: Direct drop-in replacement for failed multi-axis system amplifiers.
    • Support: Features 24/7 technical customer assistance lines.

    Brand New B&R 8BVI0220HWD0.000-1 Servo Inverter Module (8BVI Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • BEN300-DFR AUTONICS Diffuse Reflective Photoelectric Sensor

    BEN300-DFR AUTONICS Diffuse Reflective Photoelectric Sensor

    REQUEST A QUOTE

    • Sensing Type: Diffuse reflective.
    • Sensing Distance: 300 mm (30 cm).
    • Target Material: Opaque and translucent materials.
    • Light Source: Infrared LED (940 nm).
    • Power Supply: Universal 24–240VAC (50/60Hz) or 24–240VDC.
    • Control Output: Relay (comprising COM, NO, and NC terminals).
    • Operation Mode: Light-ON or Dark-ON (selectable via an onboard switch).
    • Response Time: Maximum 20 milliseconds.
    • Environmental Protection: IP50 rated.
    • Built-In Power Supply: Simplifies installation by operating directly on standard AC or DC industrial control voltages.

    Brand New AUTONICS BEN300-DFR Diffuse Reflective Photoelectric Sensor (BEN Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • BEN10M-TFR AUTONICS Through-beam Photoelectric Sensor

    BEN10M-TFR AUTONICS Through-beam Photoelectric Sensor

    REQUEST A QUOTE

    • Sensing Type: Through-beam type (Emitter + Receiver)
    • Sensing Distance: 10 meters (approx. 32.8 feet)
    • Sensing Target: Opaque materials (Minimum diameter: Ø16 mm)
    • Light Source: Infrared LED (850 nm wavelength)
    • Power Supply Voltage: 24–240 VAC ±10% (50/60Hz) / 24–240 VDC ±10% (Ripple P-P: max 10%)
    • Power Consumption: Max. 4 VA
    • Control Output: Relay contact output (SPDT, 1c contact composition)
    • Contact Capacity: 30 VDC 3A resistive load / 250 VAC 3A resistive load
    • Operation Mode: Light-ON / Dark-ON (Selectable via built-in switch/VR)
    • Response Time: Max. 20 ms
    • Indicators: Operation indicator (Red), Stability indicator (Green)
    • Connection Method: Cable type (Ø5 mm, 5-wire, Length: 2 meters)
    • Ingress Protection: Rated at IEC IP50
    • Operating Temperature: -20°C to +65°C (-4°F to 149°F) with no icing or condensation
    • Vibration Resistance: 1.5 mm amplitude at a frequency of 10 to 55 Hz in X, Y, Z directions for 2 hours
    • Housing Material: Heat-resistant ABS (Case/Cover); Polycarbonate (Sensing lens)
    • Dimensions: 18 mm (W) x 50 mm (H) x 50 mm (D)
    • Included Accessories: VR adjustment screwdriver, mounting bracket, bolts, and nuts
    • Power Connections: The internal power regulator allows you to use standard industrial AC or DC lines without swapping sensor models.
    • Relay Protection: When driving inductive loads (like an external contactor or motor coil), use a surge absorber or diode across the load to safeguard the internal SPDT relay contact lifetime.
    • Alignment: Emitter and receiver must be mounted directly face-to-face. Use the stability indicator (green LED) to fine-tune the alignment until it stays solidly lit.

    Brand New AUTONICS BEN10M-TFR Through-beam Photoelectric Sensor (BEN Series). In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.