Showing 257–272 of 294 results
-
REQUEST A QUOTE
- Control Unit Type: FP0R-C14RS
- I/O Configuration: 14 I/O points total, consisting of 8 Inputs (24VDC, compatible with both NPN/PNP sink or source) and 6 Outputs (Relay contacts, 2A).
- Memory Capacity: 16k steps of program memory alongside a large data register allocation.
- Supply Voltage: 24V DC.
- Connectivity & Programming Ports: Features a built-in Mini USB port and an RS-232C port for tool programming and communication flexibility.
- Termination & Mounting: Uses standard screw terminal blocks for secure wiring and mounts directly onto a standard DIN rail.
PANASONIC AFP0RC14RS PLC CPU Unit (FP0R).
-
REQUEST A QUOTE
- Series Compatibility: Panasonic FP-X / FP-XH PLC Series
- Number of Channels: 1 Channel
- Interface Types: RS-485 or RS-422 (Selectable via hardware/software switches)
- Insulation Type: Fully insulated port (protects the PLC from voltage spikes and ground loops)
- Maximum Baud Rate: Up to 115 kbps
- Wiring Termination: M3 Screw terminals
- Mounting Type: Direct plug-in slot on the FP-X controller body
- Space-Saving Expansion: It mounts directly onto the front face of the PLC, preserving valuable control panel space.
- Multi-Drop Networking: Ideal for configuring Modbus-RTU, MEWTOCOL, or general-purpose serial communication networks to connect HMIs, variable frequency drives (VFDs), sensors, or other PLCs.
- Electrical Protection: Internal electrical insulation ensures stable communications in high-interference industrial environments.
PANASONIC AFPX-COM3 Communication Cassette (FP-X).
-
REQUEST A QUOTE
- Processor: Integrated, on-board Intel Pentium MMX CPU running at 266 MHz.
- Chipset: Intel 430TX (PCIset TX Triton II).
- Memory: Two 144-pin SDR SO-DIMM sockets supporting up to 256 MB SDRAM.
- On-board Storage: CompactFlash SSD solution slot.
- Display Controller: C&T 69000 VGA/LCD controller with integrated PCI SVGA support.
- Networking: 10/100 Mbps Ethernet RJ-45 connection.
- Expansion Slots: 1x 16-bit ISA bus interface and 1x PC/104 expansion interface.
- System Protection: On-board Watchdog Timer capable of triggering a system reset or IRQ 11.
- BIOS: AWARD 256 Kbit Flash BIOS featuring Plug & Play, APM 1.2, and Ethernet Boot ROM capability.
PCA-6751REV B202-1 ADVANTECH Single Board Computer.
-
REQUEST A QUOTE
- Device Type: Control interface unit / RFID evaluation unit.
- Channels & Connections: Supports up to 2 channels/ports. It can connect up to 2 read/write heads, or alternatively, 1 read/write head and 1 trigger sensor.
- Protocols: Built-in 2-port Ethernet switch supporting TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP.
- Electrical: Operating voltage of 20 to 30 V DC (PELV), with a power consumption of 3.5 W (excluding heads).
- Physical Connectors: Heavy-duty M12 plug connections for Ethernet, power, and read/write heads. Includes an M4 grounding screw.
- Housing & Protection: Rugged, powder-coated aluminum housing measuring 42mm x 62mm x 137mm with an IP67 environment protection rating.
PEPPERL+FUCHS IC-KP2-1HB17-2V1D 200876 RFID Control Interface (IDENTControl).
-
REQUEST A QUOTE
- Channels/Ports: 2 channels (supports up to 2 read/write heads, or 1 head and 1 trigger sensor).
- Network Interfaces: Multi-protocol Ethernet support including EtherNet/IP, PROFINET IO, Modbus TCP, and TCP/IP.
- Integrated Switch: Features an integrated 2-port switch for network loop-through line topologies.
- Power Supply: 20 to 30 V DC.
- Protection Rating: IP67 rugged design.
- Housing Material: Powder-coated aluminum.
- Connections: M12 plug connectors for power, Ethernet, and read/write heads.
PEPPERL+FUCHS IC-KP2-2HB17-2V1D RFID Evaluation Unit (IDENTControl).
-
REQUEST A QUOTE
- Product ID / Model Type: 312025 (PSSu H SB DP)
- Device Function: Head communication module for standard and decentralized safety environments.
- System Platform Compatibility: Guard PLC / PSS 4000 automation network architectures.
- Supported Protocols: Integrates both SafetyBUS p and PROFIBUS-DP fieldbus interfaces into a single head unit.
- Device Type: Slave
- Protocol Version: DPV0
- Maximum Transmission Rate: Up to 12 MBit/s (Automatic rate detection supported).
- Station Address Range: 0 to 126d (Configured via onboard DIP hardware switches).
- Transmission Rate: 500 kBit/s
- Transmission Type: Differential two-wire cable
PILZ 312025 Head Communication Module (PSSuniversal).
-
REQUEST A QUOTE
- Module Type: Failsafe Digital Safety Input Module
- Digital Inputs: 4 independent safety inputs (I0 to I3), operating at 24 V DC / 6 mA
- Digital Outputs: 2 test pulse transistor outputs (T0 & T1), rated at 24 V DC / 0.25 A
- Operating Voltage: 16.8V DC to 30V DC (24 V DC Nominal)
- Environmental Limits: 0°C to 60°C operating temperature; up to 2000 m permanent operating height
- Dimensions: 76 mm (H) x 12.6 mm (W) x 60.2 mm (D)
- Protection Class: IP20 enclosure level protection
Pilz 312200 Failsafe Digital I/O Module (PSSu Series).
-
REQUEST A QUOTE
- Manufacturer: Red Lion Controls
- Display Type: 8-digit LCD with user-selectable red or green backlighting (0.46" / 11.7mm digit height)
- Input Frequency: Up to 20 kHz max
- Supply Voltage: 9 to 28 VDC
- Environmental Protection: NEMA 4X / IP65 front panel (water/dust resistant)
- Operating Temperature: -35°C to +75°C
- Counting Modes: Bi-directional counting, up/down control, quadrature sensing, batch counting
- Dynamic Color Changes: You can program the backlight to automatically switch from green to red (or vice versa) when a specific preset limit is reached.
- Modular Expansion: Built-in capabilities can be enhanced using plug-in optional cards available from Red Lion:
- Brand: Red Lion. Part Number # : CUB5B000. SKU #:, 2143103. Dimensions: 1.54 in H x 2.95 in W x 1.71 in D. Frequency Rating: 20 kH…
Red Lion CUB5B000 Dual Counter Rate Indicator (CUB5 Series).
-
REQUEST A QUOTE
- Channels: 16 channels (differential).
- Input Ranges: Configurable for 0…20 mA, 4…20 mA, or 0…25 mA current signals.
- Input Impedance: 250 Ohms.
- Absolute Accuracy Error: +/- 0.125 % of full scale.
- Addressing Requirements: Uses 17 input words in the control system architecture.
- Built-in Protection: Features active broken wire detection when running in the standard 4…20 mA mode.
- Isolation: Optical isolation between the channel circuitry and the backplane bus (1780 V AC for 60 seconds), allowing safe hot-swapping.
- Hardware Interface: Connects via a separate Schneider 140XTS00200 removable terminal strip for easier field wiring and drop-in maintenance.
- Product Description P/N: 140ACI04000 * Description. The Schneider Electric 140ACI04000 is a 16-channel analog current input module…
SCHNEIDER 140ACI04000 Analog Input Module (Modicon Quantum).
-
REQUEST A QUOTE
- Number of Outputs: 4 analog channels
- Output Signal Range: 4 to 20 mA (0 to 4096 counts)
- Resolution: 12-bit bipolar current
- Addressing Requirement: 4 output words
- External Loop Voltage: 12 to 30 V DC
- Maximum Voltage Drop: 30 V @ 20 mA
- Module Format: Standard Quantum slot footprint
- Absolute Accuracy Error: ±0.20% of full scale at 25 °C
- Linearity: ±1 LSB
- Temperature Drift: ±0.004% of full scale/°C (±0.007% of full scale/°C maximum)
SCHNEIDER 140ACO02000 Analog Output Module (Modicon Quantum).
-
REQUEST A QUOTE
- Inputs: 8 differential channels.
- Resolution: 16-bit analog-to-digital conversion.
- Unipolar Voltage: 0 to 5 V, 0 to 10 V
- Bipolar Voltage: ±5 V, ±10 V
- Unipolar/Bipolar Current: 0 to 20 mA, ±20 mA
- Addressing: Requires 9 input words in the control system architecture.
- Update Time: 10 ms refresh rate.
- Isolation: 500 Vrms AC between the channels and the bus; 135 Vrms AC between individual channels.
- Power Consumption: 2.2 W power dissipation; 280 mA current draw from the bus.
- Diagnostics: Built-in LED indicators tracking channel status, channel faults, and external faults. It features broken wire detection for 4–20 mA loops.
SCHNEIDER 140AVI03000 Analog Input Module (Modicon Quantum).
-
REQUEST A QUOTE
- Processor Type: 80586 (Intel 586 Architecture), 133 MHz Clock Speed
- Internal Memory: 4 MB SRAM (supports ~2.5 MB to 2.7 MB IEC application memory / 64k words user logic)
- Logic Solve Time: 0.1 to 0.5 ms per kiloword (ms/k)
- Programming Software: Concept / Unity Pro
- Watchdog Timer: 250 ms (software adjustable)
- Hardware Topology Note: Functionally identical to the non-"A" version. However, for Hot Standby topologies, you must use identical pairs (either two non-"A" or two "A" modules).
- Built-in Communication Ports: 2 × RS-232 serial ports (9-pin D-shell) utilizing Modbus protocol.
- Network Module Support: Expansion capability for up to 6 network modules including Modbus Plus, Ethernet, and Multi-Axis Motion options.
- I/O Capability: Supports up to 64 input and 64 output words locally, with expansion capacity for up to 31 remote I/O drops.
- Bus Current Requirement: 1.25 A
SCHNEIDER 140CPU53414A CPU Module (Modicon Quantum).
-
REQUEST A QUOTE
- Product Type: RIO drop adaptor module
- Range Compatibility: Modicon Quantum automation platform
- Electrical Connection: 1 female connector F (elbowed) with single cable
- Cable Requirements: Coaxial 75 Ohm
- Transmission Rate: 1544 Mbit/s
- Dynamic Range: 35 dB
- Isolation Voltage: 500 V DC (coaxial center and ground)
- Power Dissipation: 3 W (1 channel)
- Bus Current Requirement: 600 mA (1 channel)
- Electrostatic Discharge: 8 kV on air, 4 kV contact (conforming to IEC 801-2)
SCHNEIDER 140CRA93100 Remote I/O Adapter (Modicon Quantum).
-
REQUEST A QUOTE
- Metric: Specification
- Module Type: RIO Drop Adapter Module
- Compatibility: Modicon Quantum Automation Platform
- Transmission Rate: 1,544 Mbit/s
- Cable Type: 75 Ohm Coaxial Cable
- Connectors: 2 female F-type elbowed connectors (supports redundant cable setups)
- Max Expansion Capacity: Up to 27 I/O expansion modules
- Power Dissipation: 3.8 W across 2 channels
- Bus Current Requirement: 750 mA across 2 channels
- Isolation Voltage: 500 V DC between coaxial center and ground
SCHNEIDER 140CRA93200 Remote I/O Adapter (Modicon Quantum).
-
REQUEST A QUOTE
- Download Speed: Outstanding speeds up to 4 MB/s into target RAM.
- Host Connectivity: Dual-interface supporting both Hi-Speed USB 2.0 and 10/100 Ethernet.
- Cross-Platform: Out-of-the-box driver and software compatibility with Windows, Linux, and macOS.
- Target Interface Support: Broad coverage including JTAG, cJTAG, SWD, SWO, and direct SPI flash interfacing.
- Unlimited Flash Breakpoints: Overcomes hardware breakpoint limitations, allowing you to set as many breakpoints as necessary inside internal or external flash memory.
- J-Flash: A powerful standalone suite for programming flash memory on Cortex-M/R/A, RX, and RISC-V targets.
- Ozone: SEGGER’s flagship graphical debugger and performance analyzer for precise instruction tracing and code optimization.
- Comparison: J-Link PRO vs. J-Link PRO PoE
- Feature / Variant: J-Link PRO (Standard)
- Primary Use Case: Universal debug probe for individual long-distance desk setups or remote targets.
SEGGER J-LINK PRO JTAG/SWD Debug Probe (J-Link).
-
REQUEST A QUOTE
- Part Number: 1820 403 1 (or 18229150)
- Interface: 21-key keypad with a multi-line illuminated LCD text display.
- Power Supply: 24 V DC (powered directly via the inverter interface).
- Enclosure Rating: IP40 protection class (some variants list IP20).
- Parameter Copying: You can extract a complete parameter set from an inverter using the COPY TO DBG menu command, move the keypad to a different inverter, and flash it using COPY TO MDX.
- Manual Motor Control: When within safe visual sight of the application, the Start and Stop keys can be used to manually jog or run the motor.
- Diagnostics & Fault Reset: Displays specific system fault codes and descriptions. Faults can be cleared manually by navigating to parameter 840 (Reset) and toggling it to "Yes".
- User Menu Customization: Allows users to map a custom menu containing up to 50 frequently accessed parameters for quick navigation.
SEW-EURODRIVE DBG60B-01 Operator Keypad (SEW).
