Showing 1–16 of 36 results
-
REQUEST A QUOTE
- Installation Distance: 140 to 180 mm
- Detection Area: 13 × 13 mm to 52 × 52 mm
- Digital Zoom: 1X to 4X (17 adjustable steps)
- Light Receiving Element: Black & White (BW) CMOS
- Transmitter Light Source: Infrared LED (850 nm wavelength)
- Lighting Method: Pulsed illumination
- Status Indicators: 1 multi-color LED (Green / Red / Orange)
- Enclosure Rating: IP67 (Dust-tight and water-immersion resistant)*
- Operating Temperature: -10 to +50°C (No freezing)
- Operating Humidity: 35 to 85% RH (No condensation)
KEYENCE AI-H160 Sensor Head (AI Series).
-
REQUEST A QUOTE
- Application Type: Gauge pressure / Negative pressure (Vacuum)
- Rated Pressure Range: 0 to -101.3 kPa
- Pressure Resistance: 500 kPa
- Fluid Compatibility: Clean air and non-corrosive gases
- Pressure Port (Thread): M5 male thread
- Temperature Characteristics: ±2% of F.S. (relative to 25°C / 77°F)
- Material Composition: Case: PBT | Screw: SUS303 | Cable: PVC
- Operating Ambient Temperature: 0 to +50°C (32 to 122°F), with no freezing
- Operating Relative Humidity: 35% to 85% RH, with no condensation
- Vibration Resistance: 10 to 55 Hz, 1.5 mm (0.06") double amplitude, 4 hours each in X, Y, and Z axes
KEYENCE AP-41 Vacuum Sensor (AP Series).
-
REQUEST A QUOTE
- Model Type: Main Unit, Negative-Pressure (Vacuum) Type
- Rated Pressure Range: 0 to -101.3 kPa
- Compatible Fluid Type: Air or non-corrosive gases
- Pressure Type: Gauge pressure
- Control Output Type: NPN open collector (Note: The AP-C31WP variant uses PNP)
- Power Supply Voltage: 12 to 24 VDC
- Display: 3 ½-digit, 2-color, 7-segment LED (Character height: 11 mm)
- Display Resolution: Normal Mode: 0.1 kPa | Focus Mode: 0.01 kPa
- Power Consumption: Normal: ≤ 720 mW (60 mA) at 12V / ≤ 960 mW (40 mA) at 24V
- Eco Mode: ≤ 480 mW (40 mA) at 12V / ≤ 720 mW (30 mA) at 24V
KEYENCE AP-C31W Digital Pressure Sensor (AP-C30).
-
REQUEST A QUOTE
- Pressure Type: Positive Pressure (Gauge Pressure)
- Rated Pressure Range: 0 to +1.000 MPa (0 to 10 bar)
- Fluid Compatibility: Air or non-corrosive gases
- Supply Voltage: 12 to 24 VDC
- Normal Power Consumption: 12 V: ≤ 720 mW (60 mA) | 24 V: ≤ 960 mW (40 mA)
- Eco-Mode Power Consumption: 12 V: ≤ 480 mW (40 mA) | 24 V: ≤ 720 mW (30 mA)
- Response Time Options: 2.5 ms, 5 ms, 100 ms, or 500 ms (selectable chattering prevention)
- Repeatability: ± 0.2% of Full Scale (F.S.)
- Display Type: 3 1/2-digit, 2-color, 7-segment LED (11 mm character height)
- Pressure Port Connection: Rc (PT) 1/8 with 180° rotation flexibility
KEYENCE AP-C33W Digital Pressure Sensor (AP-C30).
-
REQUEST A QUOTE
- Model/Mounting: AP-V80P standard unit, DIN-rail.
- Output: PNP open collector × 2, 30 VDC, 100 mA; Analog 4-20 mA.
- Power: 12 to 24 VDC; 1,380-1,920 mW (Eco mode available).
- Display: Dual-row, 7-segment LED (red/green).
- Performance: 0.5% (Std) / 0.1% (High-res) F.S. repeatability.
- Environmental: -10 to +50°C; IP-rated for industrial use.
- Usage Constraints: Not for explosive/corrosive fluids.
- Compatibility: Must use with AP-1xS(K) series heads.
- Initialization: 1-second power-on reset time.
KEYENCE AP-V80P Amplifier Unit (AP-V80).
-
REQUEST A QUOTE
- Manufacturer: KEYENCE Corporation
- Model Number: CA-DSW3
- Lighting Type: Back Light (Produces uniform background illumination)
- LED Color: White
- Input Voltage: 12 VDC
- Power Consumption: 5.8 W
- Illumination Area: 63 × 32 mm Rectangular
- Silhouette Inspection: Positioned directly underneath or behind a target object to block surface details and emphasize external silhouettes and profiles.
- Stable Image Processing: Integrates seamlessly with KEYENCE vision systems (such as the CV-X, XG-X, or VJ series) to ensure consistent, high-contrast visual evaluation.
- Target Inspections: Commonly used for verifying target dimensions, checking thread pitches, counting components, or detecting structural flash/burrs on manufacturing lines.
KEYENCE CA-DSW3 LED Lighting (CA-D Series).
-
REQUEST A QUOTE
- Image Element: Color CMOS, square-pixel with 11×/16× high-speed reading
- Valid Pixel Count: 4.99 Megapixels (2432 × 2050 pixels)
- Unit Cell Size: 3.45 μm × 3.45 μm (0.14 mil × 0.14 mil)
- Image Size: Equivalent to 2/3" optical format
- Scanning / Transfer System: Progressive; Digital serial transfer
- Frame Readout Rate: 11× Speed: 61.2 ms
- Pixel Transfer Frequency: 11× Speed: 132 MHz
- Electronic Shutter: 0.05 ms to 9000 ms (Interval parameters: 1/15 to 1/20,000 sec)
- Lens Mount Type: Standard C-mount
- Enclosure Rating: IP64 (Requires KEYENCE-specified IP64 lens and environment-resistant cable)
KEYENCE CA-H500C Camera Head (CA-H Series).
-
REQUEST A QUOTE
- Detection Type: UV fluorescence
- Receivable Wavelength: 425–550 nm
- Detection Distance: 25–55 mm
- Recommended Focal Distance: 35 mm
- Spot Diameter: Approximately 10 mm at a reference distance of 25 mm
- Protection Rating: IP40
- Housing Material: Glass-fiber-reinforced plastic with a glass lens cover
- Weight: Approximately 40 g
The KEYENCE CZ-H52 is a UV fluorescence detection sensor head.
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R16H
- Optical Axes: 16
- Detection Capability: 25 mm
- Detection Height: 310 mm
- Operating Range: 0.2–15 m
- Safety Category: Type 4, PL e and SIL 3
- Supply Voltage: 24 VDC
- Degree of Protection: IP65 and IP67
-
REQUEST A QUOTE
- Detection Capability: ∅25 mm (∅0.98"), hand protection
- Number of Beams: 20 optical axes
- Beam Axis Spacing: 20 mm (0.79")
- Detection Height: 425 mm (16.73")
- Total Unit Length: 400 mm (15.75")
- Operating Distance: 0.2 to 15 m (0.66 to 49.21')
- Control Output: 2x Transistor (PNP/NPN based on cable)
- Robust Housing: High-grade, impact-resistant aluminum with IP65/IP67 ratings.
- No Dead Zones: Edge-to-edge protection.
- Interference Prevention: Channel switching for adjacent units.
KEYENCE GL-R20HG Safety Light Curtain (GL-R).
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R28H
- Optical Axes (Beams): 28 infrared LED beams.
- Detection Capability: 25 mm (0.98") diameter, optimized for detecting hands.
- Dimensions: Total length of 560 mm (22.05"), a detection height of 540 mm (21.26"), and a beam pitch of 20 mm.
- Operating Range: Long-range sensing from 0.2 to 15 meters (0.66 to 49.21 feet).
- Safety Ratings: Meets highest safety standards including Type 4 ESPE, SIL3, and PL e (Category 4).
- Enclosure Protection: IP65 and IP67 ratings, making it highly resistant to dust, water, oil, and heavy washdowns.
- Outputs: 2 OSSD transistor outputs (PNP or NPN selectable depending on the cable type used).
- Synchronization Options: Supports both Optical synchronization (no sync wire needed) and Wire synchronization.
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R30L
- Optical Axes: 30
- Detection Capability: 45 mm
- Detection Height: 1160 mm
- Overall Length: 1200 mm
- Operating Range: 0.2–15 m
- Beam Spacing: 40 mm
- Degree of Protection: IP65 and IP67
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R47F
- Detection Capability: Can spot objects as small as 0.55 inches (14 mm) in diameter.
- Optical Axes: Uses 47 individual beams of infrared light spaced 10 mm apart to create the safety net.
- Detection Height: Covers a vertical protection area of 18.11 inches (460 mm).
- Operating Range: Works across distances ranging from 0.66 feet to 32.81 feet (0.2 to 10 meters).
- Response Time: Drops to a swift 9.5 milliseconds to shut down machinery instantly when interrupted.
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R48H
- Detection Height: 940 mm (37.01")
- Protection Height: 985 mm (38.78")
- Total Component Length: 960 mm (37.80")
- Operating Range (Detecting Distance): 0.2 to 15 meters (0.66 to 49.21 feet)
- Response Time (ON to OFF): 9.6 milliseconds (when using wire synchronization)
- Degree of Protection: IP65 / IP67 (IEC 60529) water and dust resistance
- Control Outputs: 2 x transistor outputs (PNP or NPN, determined by your choice of connection cable)
-
- Manufacturer: KEYENCE
- Model / Part Number: GL-R71F
- Detection Type: Finger protection.
- Beam Count: 71 individual light beams.
- Beam Spacing: 10 mm between each beam.
- Detection Capability: It spots any object thicker than 14 mm (0.55 inches).
- Protection Height: 724 mm (28.5 inches) of vertical safety coverage.
- Operating Range: Operates at a distance of up to 10 meters.
-
REQUEST A QUOTE
- Applicable Models: KEYENCE GL-R Series
- Power Supply Input: 24 VDC ± 10%, Rated Current: 100 mA
- Safety Relay Outputs: Dual Force-Guided Outputs (FSD1 and FSD2)
- Max Switching Capacity: Resistive: 250 VAC 6 A / 30 VDC 6 A
- Inductive: 240 VAC 2 A / 24 VDC 1 A
- Response Time: ON → OFF: ≤ 10 ms | OFF → ON: ≤ 32 ms
- Electrical Lifespan: ≥ 100,000 cycles at maximum resistive load (6 A)
- Enclosure / Housing: Polycarbonate, IP20 rating (Must install in an IP54+ control panel)
- Safety Certifications: ISO13849-1 (Category 4, PLe), EN61496-1, UL508
- Simplified Safety Interlocking: Features onboard options for Manual and Automatic Reset. Under factory default settings, integrated shorting bars are pre-installed between terminals 8-9 and 10-11 to bypass specific diagnostic options if simpler logic is desired.
KEYENCE GL-T11R Safety Light Curtain (GL-T).
