Showing 1377–1392 of 2013 results
-
- Manufacturer: Lenze
- Model / Part Number: ESMD552L4TXA
- Power Rating: 5.5 kW (approximately 7.5 Horsepower).
- Input Voltage: 3-Phase 400V AC (standard for heavy industrial power grids).
- Output Frequency: 0 to 500 Hz (allows motors to run at very flexible speeds).
- V/Hz Control Mode: It uses standard Volts-per-Hertz control to provide stable, energy-efficient operation for standard motor tasks.
- Built-in Safety Protections: The drive monitors itself to automatically guard against short circuits, earth faults, overvoltage, motor stalling, and general overloading.
- Clear Display: Features an easy-to-read LED display on the front so operators can monitor settings and check error codes quickly.
- Smooth Ramps: Programmed acceleration and deceleration "S-ramps" stop machines from jerking when they start or stop.
-
REQUEST A QUOTE
- Manufacturer: Lenze
- Product Series: 8200 vector (EVF series)
- Device Type: AC Frequency Converter / Inverter Drive
- Voltage Rating: 380V – 480V AC input range (Standard 3-phase industrial power supply)
LENZE EVF3929-CVV003 Variable Frequency Drive (EVF Series).
-
REQUEST A QUOTE
- Series: 9300 Vector (Frequency Inverter / Servo Drive)
- Power Rating: 0.75 kW / 1 HP
- Input Voltage: 3-Phase 320V to 440V AC (Standard 380V/400V applications)
- Output Frequency: 0 to 599 Hz
- Enclosure Rating: IP20 (Designed for compact, clean environment cabinet mounting)
- Control Method: Sensorless/open-loop vector motor control
- Special Features: Enhanced firmware variant (EVV004) and an integrated Safety Lock mechanism.
LENZE EVF9322-EVV004 Variable Frequency Drive (EVF Series).
-
- Manufacturer: LENZE
- Model / Part Number: EVF9323-EVV100
- Manufacturer: Lenze
- Model / Part Number: EVF9323-EVV100 (9300 Vector Series)
- Device Type: Panel-mounted single-axis frequency inverter
- Rated Power: 1.5 kW (Kilowatts)
- Input Voltage: 3-Phase 400V AC to 480V AC (50/60 Hz)
- Output Current: 3.9 Amps
- Degree of Protection: IP20 (Protected against solid objects up to 12mm, no water protection)
-
REQUEST A QUOTE
- Manufacturer: LENZE
- Model / Part Number: EVF9328-CVV100
- Power Output: 11 kW (15 HP)
- Supply Voltage: 3-phase 380V to 480V AC (commonly optimized for 400V)
- Series Base: 9300 Vector Series
- Control Mechanism: High-dynamic vector control with modular expansion options for I/O and communication modules
- Feedback System: Supports encoder feedback for precise closed-loop positioning accuracy
- Enclosure Rating: Standard cabinet-mounted layout (typically IP20)
LENZE EVF9328-CVV100 Frequency Inverter. Key specifications include Power Output: 11 kW (15 HP); Supply Voltage: 3-phase 380V to 480V AC (commonly optimized for 400V); Series Base: 9300 Vector Series; Control Mechanism: High-dynamic vector control with modular expansion options for I/O and communication modules.
-
REQUEST A QUOTE
- Operating Range: 0.001 to 0.7 meters on a 90% white card (limit extends up to 1.0 meter).
- Light Source: Visible red LED (620 nm wavelength) featuring a brightVision light spot for fast, easy alignment.
- Electrical Outputs: 2 complementary NPN transistor outputs (Output 1 uses light switching; Output 2 uses dark switching).
- Supply Voltage: 10 to 30 V DC.
- Connection Type: Built-in 2000 mm (2-meter) axial cable.
- Housing & Protection: Cylindrical M18 ABS plastic housing rated at IP67 for harsh environments.
- Setup Adjustment: Simple sensitivity setup using an onboard two-level teach button (object vs. background).
- Design: Standard 2-meter attached cable configuration.
LEUZE ET318B.3-2N Energetic Diffuse Photoelectric Sensor (ET318B Series).
-
REQUEST A QUOTE
- Nominal Voltage: AC/DC 24 V (50/60 Hz)
- Torque: 4 Nm (approx. 35 in-lb)
- Control Type: Modulating DC 2…10 V proportional signal
- Position Feedback: DC 2…10 V
- Power Consumption: 2.5 W running / 1 W holding (5 VA wire sizing)
- Running Time (Motor): 150 seconds for 90° rotation
- Running Time (Fail-Safe): < 20 seconds (Spring Return)
- Fail-Safe Position: De-energized NC (Normally Closed / Valve Closed)
- Auxiliary Switch: Integrated SPDT switch for position feedback or safety interfacing
- Angle of Rotation: 90°
- Manual Override: Hand lever included
- Enclosure Rating: IP54 / NEMA 2
- Ambient Temperature Range: -30°C to 50°C [-22°F to 122°F]
- Electrical Connection: Pre-wired cable (1 meter supply/control cable and integrated auxiliary switch cable)
LFH24-SR-S BELIMO Rotary Valve Actuator.
-
- Manufacturer: LG
- Model / Part Number: LB104S01(TL)(01)
- Screen Size: 10.4 inches measured diagonally
- Resolution: 800 × 600 pixels (SVGA standard)
- Aspect Ratio: 4:3 (traditional square-ish screen layout)
- Display Type: Active-Matrix TFT-LCD (a-Si)
- Backlight: Cold Cathode Fluorescent Lamp (CCFL)
- Signal Interface: LVDS connector type
- Touchscreen: None (it is a display panel only; any touch glass is a separate layer)
-
REQUEST A QUOTE
- Screen Diagonal: 10.4 inches (26.4 cm)
- Resolution: 800 × 600 (SVGA)
- Interface Type: LVDS (1 channel, 6-bit) via 20 pins
- Display Mode: TN, Normally White, Transmissive
- Brightness: 230 to 250 cd/m² (Typical)
- Contrast Ratio: 400:1 (Typical)
- Active Display Area: 211.2 (W) × 158.4 (H) mm
- Outline Dimensions: 224.5 (W) × 172.0 (H) × 6.0 (D) mm
- Operating Temperature: -10°C to 70°C
- Surface Treatment: Anti-glare, Hard Coating (3H)
LG LB104S01(TL)(02) TFT-LCD Module (LB Series).
-
REQUEST A QUOTE
- Screen Size: 10.4 inches (diagonal)
- Resolution: 640 × 480 pixels (VGA format with a 4:3 aspect ratio)
- Signal Interface: Parallel RGB, 30 pins, 1-channel, 6-bit
- Input Voltage: 3.3V (Typical)
- Brightness: 400 cd/m² (Typical)
- Contrast Ratio: 300:1 (Typical)
- Original Backlight: Dual CCFL (Cold Cathode Fluorescent Lamp) tubes
LG LB104V03（A1） a-Si TFT-LCD Display Panel (LB104V03 Series).
-
- Manufacturer: LG
- Model / Part Number: LB121S02(A2)
- Screen Size: 12.1 inches diagonally.
- Resolution: 800 x 600 pixels (known as SVGA quality) with a standard 4:3 square-ish screen shape.
- Screen Type: Active Matrix TFT-LCD, which helps show clear images on older systems.
- Surface: It features an anti-glare hard coating to reduce reflections in bright workspaces.
- Touch Screen: No, this is a display panel only and does not have built-in touch capabilities.
-
- Manufacturer: LG
- Model / Part Number: LB121S03-TD01
- Screen Size: 12.1 inches diagonally
- Resolution: 800 x 600 pixels (SVGA)
- Aspect Ratio: 4:3 (the standard boxy shape)
- Brightness: 400 to 450 nits (bright enough to read clearly under bright factory lights)
- Contrast Ratio: 500:1 to 700:1 (helps text and buttons stand out)
- Backlight System: Cold Cathode Fluorescent Lamp (CCFL)
- Connection Type: LVDS (1 channel, 6-bit), which is a common plug style for industrial computers
-
REQUEST A QUOTE
- Manufacturer: LG
- Model / Part Number: LB121S03-TL01
- Screen Size: 12.1 in
- Resolution: 800 × 600 (SVGA)
- Brightness: 400 cd/m²
- Contrast Ratio: 500:1
- Interface: 20-pin LVDS, 1-channel, 6-bit
- Backlight: 2 CCFL lamps
- Surface: Anti-glare coating
- Power Input: 3.3 V
LG LB121S03-TL01 LCD Display. Contact us for product information and quotation.
-
- Manufacturer: LG
- Model / Part Number: LB121S03-TL02
- Screen Size: 12.1 inches diagonally
- Resolution: 800 × 600 pixels (SVGA aspect ratio of 4:3)
- Panel Type: a-Si TFT-LCD (Active Matrix Liquid Crystal Display)
- Backlight: Dual CCFL lamps (Cold Cathode Fluorescent Lamp)
- Brightness: 400 cd/m² (suitable for bright indoor industrial areas)
- Contrast Ratio: 500:1 to 600:1
- Working Voltage: 3.3V
- Touchscreen: None (it is just the display panel; touch overlays are separate)
- Power Requirements: This panel requires two power sources.
-
REQUEST A QUOTE
- Impact Device: Type D (Tungsten carbide impact tip)
- Measurement Accuracy: ± 6 HL
- Repeatability: 6 HL
- Supported Scales: Leeb (HL), Vickers (HV), Brinell (HB), Shore (HS), Rockwell (HRA, HRB, HRC)
- Display: OLED screen
- Battery Type: Rechargeable 3.7V @ 250mAh Lithium battery
- Battery Life: ≥ 100 hours continuous operation / ≥ 5000 continuous measurements
- Charging Port: USB Type-C
- Dimensions: 148 × 34 × 24 mm (5.83 × 1.34 × 0.94 in)
- Weight: ~68 g (2.4 oz)
LINSHANG LS252D Level Sensor (LS Series).
-
REQUEST A QUOTE
- Torque: 5 Nm (Newton meters)
- Power Supply: AC 100…240 V at 50/60 Hz (Nominal range: AC 85…265 V)
- Power Consumption: 2 W when running / 0.5 W in the rest position
- Running Time: 90 seconds for a 90° rotation
- Control Type: Open/close (2-point) or 3-point floating
- Enclosure Rating: IP54 / NEMA 2 (dust and splash protection)
- Connection: Comes with an integrated 1-meter, 3-wire PVC cable
- Overload Protection: The actuator is completely overload protected, eliminating the need for electrical limit switches. It automatically stops spinning once it hits its physical end stops.
- Manual Override: Features a temporary or lockable manual override push-button, which disengages the gear train so you can adjust the valve by hand during setup or testing.
- Simple Direct Mounting: Designed to attach quickly to standard ball valves using just one central screw, preventing improper mechanical alignment.
LR230A 220V BELIMO Rotary Valve Actuator.
