Showing 1057–1072 of 1316 results
-
REQUEST A QUOTE
- Switching Type: Magnetic, non-contact operation to minimize mechanical wear.
- Contact Configuration: 2 Normally Open (2NO / DPST-NO) contacts.
- Supply / Switched Voltage: 24 VDC maximum.
- Operating Distance: Assured switching distance of 8 mm (with a switch-off distance of 26 mm).
- Connection Type: 4-pin M8 male connector.
- Protection Rating: IP67 (dust-tight and water-resistant).
- Housing Material: PBT (Polybutylene Terephthalate) plastic, square design.
- Dimensions: 36 mm (or up to 42.8 mm depending on bracket inclusion) x 26 mm x 13 mm.
- Status Indication: Standard variant without LED.
- Package Contents: Includes 1 safety sensor unit along with its matching coded magnetic actuator.
Brand New PILZ 504220 Safety Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Technology & Coding: RFID transponder technology with unique coding to provide a high level of tamper resistance.
- Safety Outputs: Features 2 safe semiconductor (OSSD) outputs that are short-circuit proof.
- Electrical Ratings: Operates on 24 Vdc supply voltage with a low power consumption of 1W.
- Connection Type: Integrated 8-pin M8 male connector.
- Nominal switching distance: 11 mm
- Enclosure Rating: Certified at IP67 and IP69K, meaning it is fully sealed against heavy dust and high-pressure washdowns.
- Actuation: Operates via a single actuation direction. A complete unit includes both the safety switch and the matching actuator.
- Diagnostics: Built-in 3-LED interface providing immediate visual status for the actuator, inputs, and power/fault conditions.
- Manufacturer Portal: View data sheets and downloads directly on the official Pilz Product Page.
Brand New PILZ 541010 Safety Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Product Type: RFID Safety Switch (Coded Switch without Actuator)
- Supply Voltage: 24 Vdc (1W Power Rating)
- Outputs: 2 Safe Semiconductor (OSSD) / 1 Signal Output
- Connection Type: M12, 5-Pin Male Connector
- Protection Rating: IP67 / IP69K
- Operating Temp: -25°C to 70°C
- Housing Material: Polybutylene Terephthalate (PBT)
- Operating Frequency: 122 kHz – 128 kHz
- Highest Tamper Protection: Employs RFID transponder technology. The switch will only actuate when matched with a compatible coded actuator element, preventing manual override bypasses.
- OSSD Safety Outputs: Delivers 2 safe semiconductor outputs directly to your safety controller or relay setup.
Brand New PILZ 541053 Safety Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
Compact coded RFID safety switch for non-contact guard monitoring in industrial automation systems.
Technical Specifications
- Supply Voltage: 24 V DC, 1 W
- Safety Outputs: 2 x OSSD semiconductor outputs
- Connection: 0.15 m pigtail, 8-pin M12 male
- Coding: Coded transponder; actuator not included
- Protection: IP67 / IP69K
- Dimensions: 26 x 37 x 18 mm
- Operating Temperature: -25 °C to +70 °C
Brand New PILZ 541059 RFID Safety Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Pilz GmbH & Co. KG
- Product Series: PSENcode (Compact Design)
- Operating Voltage: 24 Vdc (1 W power consumption)
- Connection Type: 5-pin M12 male connector
- Outputs: 2 safe semiconductor (OSSD) digital outputs (100mA)
- Sensing Distances: 11 mm operating distance
- Actuation: 1 actuation direction
- Coding Level: Low coding according to ISO 14119 (Switch only; actuator sold separately)
- Protection Rating: IP67 / IP69K (high dust and water ingress resistance)
- Operating Temperature: -25°C to +55°C
Brand New PILZ 541353 Safety Switch. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Product Line / Model: PNOZmulti 2 / PNOZ m B0.1
- Supply Voltage: 24 V DC
- Total Safe Inputs: 20 safe digital inputs (12 dedicated + 8 configurable)
- Safe Outputs: 4 safe semiconductor outputs
- Test Pulse Outputs: 4 outputs
- Programming Interface: Mini USB connection
- Storage Medium: Requires a 32 kB chip card (not included)
- Mounting & Housing: DIN35 rail mounting, IP20 protection
- Expandable Architecture: The base unit can be expanded with digital I/O modules, relay outputs, or communication fieldbus modules (e.g., PROFINET, EtherNet/IP, Modbus).
- Software Configuration: Configured graphically via drag-and-drop using the PNOZmulti Configurator software platform.
Brand New PILZ 772104 Safety Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Pilz GmbH & Co. KG
- Product ID / MPN: 774041
- Supply Voltage: 24 V DC (Acceptable range: 20.4–26.4 V DC)
- Inputs: 1-channel wiring (single safety input, 24Vdc/50mA)
- Safety Outputs: 1 N/O (Normally Open) delayed safety contact (6A capacity)
- Auxiliary Outputs: 2 N/C (Normally Closed) delayed auxiliary contacts
- Time-Delay Range: 0 to 3 seconds, selectable across 12 distinct levels (0.3s to 3.0s)
- Safety Integrity: Up to SIL 3 / PL d / Cat. 3 depending on implementation architecture
- Connection Type: Built-in fixed screw terminals
- Mounting & Width: 45 mm wide housing, DIN rail mounting
Brand New PILZ 774041 Safety Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: Pilz PNOZ X Series
- Outputs: 2 Normally Open (N/O) instantaneous safety contacts
- Inputs: 1/2-channel wiring configuration with or without cross-circuit short detection
- Physical Profile: 45 mm compact width, designed for DIN rail railing mounting
- Terminals: Integrated fixed screw termination
- Safety Ratings: Up to SIL 3 / PL e / Cat. 4 depending on installation wiring
- E-STOP Pushbuttons: Detects dual-channel or single-channel emergency stop breaks.
- Safety Gates: Monitors interlocking switches or limit switches on machine guards.
- Pressure-Sensitive Mats: Configured to monitor short-circuit principle safety mats.
- Feedback Loop: Built-in capability to monitor external relays or contactors.
Brand New PILZ 774066 Safety Relay. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Adjustable Pressure Range: 0.1 to 0.8 MPa (14.5 to 116 PSI).
- Max Supply Pressure: 1.0 MPa (145 PSI).
- Features: Built-in pressure gauge (5% accuracy), integrated pressure relief mechanism for easier downstream adjustments.
- Differences: RVUM6-6 vs. RVUMP6-6 (Successor)
- Higher Flow Capacity: The new design enables roughly 1.3 times higher flow rate than the legacy model.
- Improved Stability: Features a push-lock setting knob and a reduced set pressure fluctuation range.
- Form Factor: Keeps the same 6mm inline configuration for an easy drop-in replacement.
Brand New PISCO RVUM6-6 Throttle Valve. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series Type (MSA): Heavy Load Type featuring a 45° ball contact angle. This configuration allows the block to bear equal radial, reversed radial, and lateral loads seamlessly in any mounting orientation.
- Block Type (S): Square type carriage with a compact width, designed to be securely installed from the top side.
- Dimensions: Measures approximately 28mm (Height) × 34mm (Width) × 56.3mm (Length).
- Sealing & Preload Code (SSSFCN): Indicates specific end seals, side seals, inner seals, and a light-to-medium balanced preload designed to optimize rigidity while minimizing friction.
- HIWIN: HGH15CA
- NSK: NSRH15BZ
Brand New PMI MSA15SSSFCN Linear Guide. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- MSB: Series name representing a compact type linear guideway with a 45-degree four-row ball train contact angle.
- SS: Standard seals equipped at both ends to prevent dust contamination and retain lubricants.
- FCN: Part designation indicating high-accuracy carbon steel material construction and standard manufacturing precision clearance.
- Height (Assembly H): 28 mm
- Width (W): 42 mm
- Length (L): 67 mm
- Patented Lubrication Trajectory: Houses a specialty internal lubrication route ensuring grease or oil is divided evenly across all recirculation loops, improving reliability and running accuracy.
Brand New PMI MSB20SSSFCN Linear Guide. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Display Type: 10.4-inch TFT Color LCD, supporting up to 64 colors.
- Resolution: 640 x 480 pixels (VGA).
- Power Supply: 24V DC input (allowable range ±20%).
- Power Consumption: 50W or less (typically around 20W).
- Dimensions: 317mm x 243mm x 85mm.
- Environmental Protection: Meets NEMA 4X/12 and IP65f ratings, providing excellent protection against water and dust in harsh factory environments.
- Configuration Software: Programmed using standard Pro-face legacy software, specifically GP-Pro/PBIII.
- Same Cutout Size: For a drop-in physical replacement without cutting into your cabinet panel, use the SP5000 Series combined base and panel modules (e.g., PFXSP5600TPD paired with PFXSP5B10).
- Different Cutout Size: The GP4000 Series (PFXGP4501TMD) acts as a highly functional software replacement but features alternative physical dimensions.
- Product Description P/N: GP577R-TC41-24VP * Description. The GP577R-TC41-24VP is a 10.4-inch operator interface from Pro-Face. It …
Brand New PRO-FACE GP577R-TC41-24VP Touch Screen. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Manufacturer: Schneider Electric Pro-face
- Series / Model: GP4000E Series / GP-4502WW
- Display Type: TFT Color LCD with Analog Resistive Touch Film
- Screen Size: 10.1-inch Widescreen (Effective area: 219.6 x 131.76 mm)
- Resolution: 800 x 480 pixels (WVGA)
- Display Colors: 65,536 colors
- Backlight Type: LED (Service life ≥ 20,000 hours with 8-level brightness control)
- Input Voltage: 24 VDC (Power consumption ≤ 10 W)
- Application Memory: 32 MB Flash EPROM (128 KB Flash EPROM backup memory)
- Cooling Method: Natural air circulation (no cooling fans)
- Front Panel Rating: IP65F / Enclosure Type 4 Indoor Use Only
- Ethernet: 10/100 Base-T port for networking, PLC connectivity, and remote monitoring.
- USB Ports: 1 x USB 2.0 Type-A (for data logging and storage) and 1 x USB 2.0 mini-B (for project transfer).
- Programming Software: Managed via GP-Pro EX Software, which allows configuration for animations, alarm analysis flows, XY graphs, and multi-device drivers.
- Remote Supervision: Supports remote monitoring and data acquisition via GP-Viewer EX software.
- Mounting Options: Can be seamlessly integrated into panels using either landscape or portrait orientation layouts.
Brand New Pro-Face PFXGP4502WADW Widescreen HMI Panel (GP4000E Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Backplane Power Consumption: 5 VDC, maximum 1100 mA.
- Operating Temperature: 0°C to 60°C (32°F to 140°F).
- Lifecycle Status: Discontinued by Manufacturer (Categorized as a legacy product by ProSoft Technology).
- Integration Capabilities: Operates using comDTM technology, making it compatible with asset management applications like PACTware and Endress+Hauser FieldCare.
- Legacy Drop-in Context: It offers similar capability and performance to the legacy Modicon 140 CRP 811 00 module, though it requires project configuration modifications rather than being a direct physical substitution.
- Configuration Process: Configured via the ProSoft Configuration Builder (PCB) software, which defines data block sizes, node mapping, GSD files, and CPU start registers. It transfers diagnostic data, acyclic reads/writes, and handles Hot Standby network syncing.
Brand New Pro-Soft PTQ-PDPMV1 PROFIBUS DP Master Module (PTQ Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Protocol Support: PROFIBUS DPV1 (Cyclic I/O data and acyclic messaging).
- Hardware Form Factor: In-chassis module for 1769 CompactLogix systems (slots into the local I/O bank or remote 1769 expansion racks).
- Configuration Interface: Integrated via Studio 5000 / RSLogix 5000 as a standard I/O module using an Add-On Profile (AOP).
- Physical Hardware Address: Equipped with rotary switches to easily set the node's PROFIBUS bus address.
- Remote Access: The dedicated Ethernet port eliminates the need to plug directly into the module hardware on the plant floor; configuration and advanced troubleshooting can be handled over the plant network.
- Seamless PLC Integration: Appears to the CompactLogix controller as standard native I/O. Explicit CIP ladder logic message blocks handle slave status diagnostics and acyclic DP-V1 data commands.
- Configuration Flexibility: The module can automatically adapt to parameters downloaded from the PROFIBUS network Master or follow configuration locked down locally by the Logix processor.
Brand New ProSoft ILX69-PBS PROFIBUS Slave Module (ILX69 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Input Voltage Range: 18 – 32.4V DC (24V DC nominal)
- Output Voltage: 12 – 15V DC (Adjustable)
- Output Current: 8A (at 12V) to 6.4A (at 15V)
- Output Power: 96W nominal
- Efficiency: Up to 88.2%
- Dimensions: 32mm Width x 124mm Depth x 102mm Height
- Power Reserves: Includes a 20% PowerBoost feature, allowing it to continuously deliver up to 115W at ambient temperatures up to +45°C.
- Electrical Isolation: Features safe galvanic isolation between the input and the output circuits.
- Circuit Protection: Built-in soft-start function to minimize inrush current spikes, paired with reverse input polarity protection.
Brand New PULS CD5.121 Switching Power Supply. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
