Showing 2065–2080 of 2131 resultsSorted by latest
-
REQUEST A QUOTE
- Input Phase & Voltage: 1-Phase, 200 V to 240 V AC (±10%)
- Output Phase & Voltage: 3-Phase, 0 to Input Voltage (230 V nominal)
- Output Current: 9.8 A
- Power Rating: 2.2 kW (3 HP)
- Output Frequency: 0 to 500 Hz
- Frame Size: R2
- Overload Capacity: 150% of rated current for 60 seconds
- Protection Class: IP20 / NEMA Open Type
- Integrated Hardware: Built-in keypad, speed potentiometer, and C3 EMC filter
- Net Weight: 1.8 kg (3.97 lbs)
ABB ACS150-01E-09A8-2 Micro Variable Frequency Drive (VFD) (ACS150).
-
REQUEST A QUOTE
- Power Rating: 1.5 kW (2.0 Hp)
- Input Supply Phase: 1-Phase
- Output Phase: 3-Phase (for driving 3-phase induction motors)
- Input Voltage Range: 200 V to 240 VAC ± 10% (50/60 Hz)
- Maximum Output Current: 7.5 A continuous
- Maximum Input Current: 16.8 A (Requires appropriate upstream circuit protection)
- Output Frequency Range: 0 to 500 Hz
- Frame Size: R2
- Enclosure Rating: IP20 / UL Open Type
- Motor Control Method: Scalar Control (U/F Voltage/Frequency curve scaling)
ABB ACS150-01E-07A5-2 Micro Variable Frequency Drive (VFD) (ACS150).
-
REQUEST A QUOTE
- Manufacturer: ABB (Asea Brown Boveri)
- Product Series: ACS150
- Input Phase Count: 1-Phase (-01)
- Regional Design: European/EMC Filter (E)
- Output Current: 6.7 Amperes (-06A7)
- Voltage Class: 200–240V AC (-2)
- Power Output: 1.1 kW / 1.5 HP
- Enclosure Rating: IP20 / UL Open Type
- Motor Control Mode: Scalar Control (V/f)
- Overload Capacity: 150% for 1 min every 10 min
ABB ACS150-01E-06A7-2 Micro Variable Frequency Drive (VFD) (ACS150).
-
REQUEST A QUOTE
- Configuration: Single IGBT with discrete Free-Wheel Diode
- Weight: 270 g / ~0.6 lbs
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heatsink baseplate
- Integrated Free-Wheel Diode: Features a dedicated, super-fast recovery diode connected anti-parallel to handle inductive load current
MITSUBISHI CM450HA-5F IGBT Module (CM450).
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Primary Uses: Optimized for general-purpose industrial inverters, AC motor drives, and high-precision servo controls.
- Integrated Diodes: Contains two IGBT transistors connected in a half-bridge layout, each supported by an ultra-fast recovery reverse freewheeling diode.
- Package Footprint: Chassis mount module configuration utilizing a standard multi-terminal layout with M6 nuts for structural power termination.
MITSUBISHI CM400DY-24NF IGBT Module (CM400).
-
REQUEST A QUOTE
- Configuration: Dual / Half-Bridge (2 elements)
- Technology Generation: IGBT 5 (Trench Gate)
- Mounting / Terminals: Panel (Screw) / 7-Pin Tab
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heat-sinking baseplate. This provides simplified thermal management, letting you mount multiple modules to a single common heatsink without external electrical isolation.
- Discrete Free-Wheel Diode: Features integrated, super-fast recovery reverse diodes designed to handle high freewheeling currents and protect the IGBT structure from inductive voltage spikes.
- AC Motor Control: Variable frequency drives (VFDs) and high-power industrial AC drive inverters.
- Servo Controls: Precision motion control systems requiring heavy current handling.
- Uninterruptible Power Supplies (UPS): High-reliability backup power systems.
- Power Management: Battery-powered industrial supplies, solar inverters, and large DC-to-DC converters.
MITSUBISHI CM400DY-24A IGBT Module (CM400).
-
REQUEST A QUOTE
- Collector-Emitter Saturation: 3.2 V
- Package / Mounting: 7 Terminals, Chassis Mount
- Industrial Power Systems: Uninterruptible Power Supplies (UPS inverter/rectifier stages), AC motor speed controls, motion/servo controls, and heavy-duty welding power supplies.
- High-Voltage DIY & Tesla Coils: This module is widely considered a gold standard among hobbyists for building medium-to-high power DRSSTC (Dual Resonant Solid State Tesla Coils). Two modules paired in a full-bridge configuration can manage an output swing of nearly 1400V, producing electrical arcs exceeding 12 feet.
- Discontinued Status: The CM300DY-24H has been officially discontinued by Mitsubishi Electric.
MITSUBISHI CM300DY-24H IGBT Module (CM300).
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Integrated Protection: Freewheeling Diodes
- Motor Drives: Used to orchestrate AC and DC motor control, as well as servo amplifiers.
- Power Converters: Frequently integrated into large industrial inverters, Uninterruptible Power Supplies (UPS), and induction heating rigs.
- Renewable Energy: Acts as a stage-power switching element for commercial solar inverters and wind turbine networks.
- DIY & High Voltage Projects: Highly favored in the hobbyist community for constructing heavy-duty Dual Resonant Solid State Tesla Coils (DRSSTC), notably running off a doubled 120VAC line to achieve electric arc discharges spanning over 6 feet (1.83 meters).
- Datasheet Review: The official structural schematic and thermal curves can be cross-examined via the ALLDATASHEET CM300DY-12NF PDF.
MITSUBISHI CM300DY-12NF IGBT Module (CM300).
-
REQUEST A QUOTE
- Metric: Specification
- Module Type: RIO Drop Adapter Module
- Compatibility: Modicon Quantum Automation Platform
- Transmission Rate: 1,544 Mbit/s
- Cable Type: 75 Ohm Coaxial Cable
- Connectors: 2 female F-type elbowed connectors (supports redundant cable setups)
- Max Expansion Capacity: Up to 27 I/O expansion modules
- Power Dissipation: 3.8 W across 2 channels
- Bus Current Requirement: 750 mA across 2 channels
- Isolation Voltage: 500 V DC between coaxial center and ground
SCHNEIDER 140CRA93200 Remote I/O Adapter (Modicon Quantum).
-
REQUEST A QUOTE
- Product Type: RIO drop adaptor module
- Range Compatibility: Modicon Quantum automation platform
- Electrical Connection: 1 female connector F (elbowed) with single cable
- Cable Requirements: Coaxial 75 Ohm
- Transmission Rate: 1544 Mbit/s
- Dynamic Range: 35 dB
- Isolation Voltage: 500 V DC (coaxial center and ground)
- Power Dissipation: 3 W (1 channel)
- Bus Current Requirement: 600 mA (1 channel)
- Electrostatic Discharge: 8 kV on air, 4 kV contact (conforming to IEC 801-2)
SCHNEIDER 140CRA93100 Remote I/O Adapter (Modicon Quantum).
-
REQUEST A QUOTE
- Processor Type: 80586 (Intel 586 Architecture), 133 MHz Clock Speed
- Internal Memory: 4 MB SRAM (supports ~2.5 MB to 2.7 MB IEC application memory / 64k words user logic)
- Logic Solve Time: 0.1 to 0.5 ms per kiloword (ms/k)
- Programming Software: Concept / Unity Pro
- Watchdog Timer: 250 ms (software adjustable)
- Hardware Topology Note: Functionally identical to the non-"A" version. However, for Hot Standby topologies, you must use identical pairs (either two non-"A" or two "A" modules).
- Built-in Communication Ports: 2 × RS-232 serial ports (9-pin D-shell) utilizing Modbus protocol.
- Network Module Support: Expansion capability for up to 6 network modules including Modbus Plus, Ethernet, and Multi-Axis Motion options.
- I/O Capability: Supports up to 64 input and 64 output words locally, with expansion capacity for up to 31 remote I/O drops.
- Bus Current Requirement: 1.25 A
SCHNEIDER 140CPU53414A CPU Module (Modicon Quantum).
-
REQUEST A QUOTE
- Inputs: 8 differential channels.
- Resolution: 16-bit analog-to-digital conversion.
- Unipolar Voltage: 0 to 5 V, 0 to 10 V
- Bipolar Voltage: ±5 V, ±10 V
- Unipolar/Bipolar Current: 0 to 20 mA, ±20 mA
- Addressing: Requires 9 input words in the control system architecture.
- Update Time: 10 ms refresh rate.
- Isolation: 500 Vrms AC between the channels and the bus; 135 Vrms AC between individual channels.
- Power Consumption: 2.2 W power dissipation; 280 mA current draw from the bus.
- Diagnostics: Built-in LED indicators tracking channel status, channel faults, and external faults. It features broken wire detection for 4–20 mA loops.
SCHNEIDER 140AVI03000 Analog Input Module (Modicon Quantum).
-
REQUEST A QUOTE
- Number of Outputs: 4 analog channels
- Output Signal Range: 4 to 20 mA (0 to 4096 counts)
- Resolution: 12-bit bipolar current
- Addressing Requirement: 4 output words
- External Loop Voltage: 12 to 30 V DC
- Maximum Voltage Drop: 30 V @ 20 mA
- Module Format: Standard Quantum slot footprint
- Absolute Accuracy Error: ±0.20% of full scale at 25 °C
- Linearity: ±1 LSB
- Temperature Drift: ±0.004% of full scale/°C (±0.007% of full scale/°C maximum)
SCHNEIDER 140ACO02000 Analog Output Module (Modicon Quantum).
-
REQUEST A QUOTE
- Number of Inputs: 8 digital inputs.
- Rated Supply Voltage: 24 V DC (provided via a power module).
- Module Width: 15 mm.
- Input Characteristics: Meets IEC 61131, type 1 standards; supports 2-wire sensor connections.
- Isochronous Mode: Supported
- Power Loss: Typically 1.2 W.
- Address Space: Maximum of 1 byte per module.
- Dimensions & Weight: 9.00 x 6.30 x 2.20 cm; weighs approximately 0.042 kg (0.04 lbs).
SIEMENS 6ES7131-4BF00-0AA0 Digital Input Module (ET 200S).
-
REQUEST A QUOTE
- Series: SIMATIC DP / ET 200S Distributed I/O System
- Input Channels: 4 digital inputs
- Voltage Rating: 24V DC
- Module Type: High Feature (HF) with parameterized input delay
- Width: 15 mm
- Diagnostics: Short-circuit protection for encoders; integrated System Fault (SF) LED indicator for group faults.
- Power Loss: Approximately 0.7W
- Dimensions & Weight: 9.00 x 8.3 x 6.2 cm; 0.177 kg
SIEMENS 6ES7131-4BD01-0AB0 Digital Input Module (ET 200S).
-
REQUEST A QUOTE
- Module Type: Digital Input Module (4DI DC24V ST)
- Number of Inputs: 4 digital inputs
- Input Voltage: 24 V DC (with reverse polarity protection)
- Module Width: 15 mm
- Dimensions: 9.4 x 8.3 x 6.5 cm
- Weight: 0.174 Kg (approx. 0.38 lbs)
- Diagnostics: Green LED status indicator per channel; group fault (SF) LED
- Lifecycle Status: Product Phase-out began in October 2020, followed by complete product cancellation in October 2023.
SIEMENS 6ES7131-4BD01-0AA0 Digital Input Module (ET 200S).
