Showing 33–48 of 94 results
-
REQUEST A QUOTE
- Number of Channels: 2 channels (supporting independent field inputs)
- Barrier Type: Galvanic Isolation
- Supply Voltage: 20 to 35 V DC
- Signal Input Type: NAMUR Input (conforming to BS EN60947–5–6:2001) or Switch
- Signal Output Type: Changeover Relay Contacts
- Sensor Voltage Supply: 7 to 9 V DC from 1kΩ ±10%
- Operating Temperature: -20°C to +60°C (-4°F to 140°F)
- Width: Compact 16mm DIN-rail mount housing
- Legacy Replacement: Official replacement model for the legacy MTL3013
- Line Fault Detection (LFD): The interface features built-in line fault detection capable of monitoring open or short-circuit conditions in the field wiring. When an error occurs, it is indicated via top-facing LEDs. LFD can be enabled or disabled via user-selectable switches located on the side of the housing.
MTL MTL5516C Switch/Proximity Detector Interface (MTL5500).
-
- Brand: Omron
- Model: D4NL-1HFG-B
- Series: D4NL
- Lock mechanism: Solenoid lock / mechanical release
- Contact configuration: 3NC + 2NC
- Solenoid voltage: 24 V DC
- Solenoid current: 200 mA
- Conduit entry: Pg13.5
- Holding force: 1300 N
- Protection: IP67
- AC-15 contact rating: 3 A at 240 V AC
- DC-13 contact rating: 0.27 A at 250 V DC
-
REQUEST A QUOTE
- Series Type: EASY Type (Non-cascadable, simplified on/off functions)
- Protective Height: 185 mm (7.28 inches)
- Detection Capability: 25 mm diameter (Optimized for Hand Protection)
- Number of Beams: 8 beams
- Beam Gap / Pitch: 20 mm
- Operating Range: 0.2 m to 7.0 m (0.65 ft to 23 ft)
- Safety Outputs: 2 x PNP outputs (200 mA max at 24 VDC)
- Supply Voltage: 24 VDC ±20% (SELV/PELV)
- Cable Type: 3-meter pre-wired discrete cable
- Enclosure Rating: IP65 (Dust-tight and protected against water jets)
OMRON F3SJ-E0185P25 Safety Light Curtain (F3SJ-E).
-
- Manufacturer: OMRON
- Model / Part Number: F3W-D052B
- Sensing Method: Through-beam (it uses a separate emitter and receiver pair).
- Number of Beams: 5 optical axes.
- Beam Gap: 25 mm between each beam.
- Sensing Width: 100 mm height coverage.
- Sensing Distance: Up to 3 meters (adjustable between short and long ranges).
- Output Type: NPN open collector.
- Connection: Pre-wired pigtail cable with an M12 connector.
- Voltage: 12 to 24 VDC.
-
REQUEST A QUOTE
- Safety Outputs: 5PST-NO (5 Form A) instantaneous
- Auxiliary Output: SPST-NC (1 Form B)
- Contact Rating: 5A at 250 VAC / 30 VDC
- Safety Performance: Rated up to PL e / Safety Category 4
- Input Channels: Configurable for 1-channel or 2-channel inputs
- Mounting: Standard DIN rail
OMRON G9SA-501 Safety Relay Unit (G9SA).
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-1.30
- Channels: 1-Channel (protects 2 signal lines)
- Nominal Voltage: 24 V DC
- Rated Current: 250 mA
- Series Resistance: < 0.5 Ω per line
- Leakage Current: < 10 µA at 24 V (at 25 °C)
- Mounting Style: 35mm DIN Rail Mount
- Enclosure Rating: IP20
- Safety Integrity Level: Up to SIL 3
- Auto Reset: Built for uninterrupted operation. The module resets automatically after a surge event clears.
-
REQUEST A QUOTE
- Voltage & Current: 24V DC nominal voltage, 30V DC maximum continuous operating voltage, and a 250 mA rated current.
- Surge Capability: Handles a total discharge current of 20 kA (8/20 µs pulse) and an impulse discharge current of 2 kA per line (10/350 µs).
- Safety Certification: Rated up to SIL 3 safety standards.
- Line Protection: Features 2 protected signal lines with a built-in series resistance of less than 0.5 Ω per line.
- Mounting & Protection: Mounts onto standard 35mm DIN rails with an IP20 housing protection rating.
PEPPERL+FUCHS K-LB-1.30G Surge Protection Barrier (K-System).
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-1.6G
- Channels: 1-channel module
- Rated Voltage: ≤ 6 V DC (up to ≤ 12 V in an on-state)
- Rated Current: 250 mA
- Maximum Surge Current: 20 kA per line based on an 8/20 μs pulse
- Leakage Current: ≤ 5 µA
- Response Time: Super-fast 1 nanosecond symmetrical / 100 nanoseconds asymmetrical
- Operating Temperature: -30 °C to 80 °C (T6 rating drops to ≤ 50 °C)
- Mounting Type: Snaps directly onto standard 35 mm DIN mounting rails.
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-2.6
- Channels: 2 separate channels.
- Operating Voltage: ≤ 6V DC (with an on-state maximum of ≤ 12V).
- Maximum Surge Current: 20 kA per line using standard 8/20 µs wave pulses.
- Response Time: Ultra-fast, triggering in 1 nanosecond (ns) for symmetrical surges.
- Mounting Type: Standard DIN rail mount module.
- Ground Isolation: Features 500V DC ground insulation to protect connected instrumentation from ground loops.
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-2.6G
- Nominal Voltage: 1 V DC
- Max Continuous Operating Voltage: 6 V DC
- Rated Current: 250 mA
- Series Resistance: < 0.5 Ω per line
- Total Number of Protected Lines: 4 lines
- Voltage Protection Level: Max 90V line-to-line / 25V line-to-earth
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: KCD2-RR-EX1
- Function: Resistance signal repeater
- Supported Sensors: Pt100, Pt500 and Pt1000 RTDs
- Output: Resistance output
- Supply Voltage: 24 VDC
- Mounting: DIN rail or Power Rail
- Housing Width: 12.5 mm
- Line Fault Detection: Open-circuit and short-circuit detection
-
- Manufacturer: Pepperl+Fuchs
- Model / Part Number: KCD2-SOT-EX2
- Operating Voltage: 24 V DC
- Mounting Type: 35 mm DIN Rail
- Indicators: Built-in LEDs to quickly show power, output status, and wiring faults
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: KCD2-SR-EX1.LB
- Signal Type: Digital Input
- Number of Channels: 1 channel
- Functional Safety: Up to SIL 2 (Safety Integrity Level) according to IEC/EN 61508
- Power Consumption: ≤ 750 mW
- Input Options: NAMUR sensors or dry (mechanical) contacts
- Output Type: Relay contact output & Fault relay contact output
- Housing Width: Ultra-compact 12.5 mm space-saving design
- Mounting: 35 mm DIN mounting rail
- Line Fault Detection (LFD): The device actively monitors field lines for breakages (≤ 0.1 mA) or short circuits (≥ 6.5 mA) to increase operational safety.
-
REQUEST A QUOTE
- Supply Voltage: 24 V DC (operational range 19–30 V DC via Power Rail or terminals)
- Channels: 2 fully independent channels
- Inputs: Dry contact mechanical switches or NAMUR sensors
- Outputs: Relay contacts (1 NO configuration per channel)
- Housing Width: Ultra-compact 12.5 mm space-saving design
- Functional Safety: Certified up to SIL 2 (SC 3) in accordance with IEC/EN 61508
- Features: Line Fault Detection (LFD) for open-circuits or short-circuits, and reversible operating direction via DIP switches
PEPPERL+FUCHS KCD2-SR-EX2 216720 Switch Amplifier (KCD2).
-
REQUEST A QUOTE
- Power Requirements: 24 V DC supply voltage via loop power (no separate power supply required).
- Signal Range: Handles input and output analog currents from 0 mA to 40 mA.
- Control Voltage: 4 V to 35 V DC.
- Accuracy & Linearity: High accuracy calibrated to ±1%.
- Safety & Integrity: Up to SIL 2 (Systematic Capability SC 3) compliant according to IEC/EN 61508.
- Hardware Profile: Measures 20 mm in width (compact K-System housing) featuring screw terminal connections, reverse polarity protection, and standard 35 mm DIN rail mounting.
- Specifications: * Number of Channels: 1. * Supply Voltage: 24 V DC (loop powered) * Input: Current. * Output: 0 to 40 mA. * I/P or…
PEPPERL+FUCHS KFD0-CS-EX1.51P Isolated Barrier (KFD0).
-
REQUEST A QUOTE
- Manufacturer: Pepperl+Fuchs
- Model / Part Number: KFD0-SD2-EX2.1245
- Channels: 2 independent channels
- Power Supply: Loop powered from the control-side circuit (24 V DC)
- Output Limit: 45 mA at 12 V DC to field devices
- Safety Rating: Up to SIL 3 per IEC/EN 61508
- Housing: K-System module
- Protection Rating: IP20
Pepperl+Fuchs KFD0-SD2-EX2.1245 Safety Barrier. Contact us for product information and quotation.
