Showing 1457–1472 of 2013 results
-
REQUEST A QUOTE
- Collector-Emitter Saturation: 3.2 V
- Package / Mounting: 7 Terminals, Chassis Mount
- Industrial Power Systems: Uninterruptible Power Supplies (UPS inverter/rectifier stages), AC motor speed controls, motion/servo controls, and heavy-duty welding power supplies.
- High-Voltage DIY & Tesla Coils: This module is widely considered a gold standard among hobbyists for building medium-to-high power DRSSTC (Dual Resonant Solid State Tesla Coils). Two modules paired in a full-bridge configuration can manage an output swing of nearly 1400V, producing electrical arcs exceeding 12 feet.
- Discontinued Status: The CM300DY-24H has been officially discontinued by Mitsubishi Electric.
MITSUBISHI CM300DY-24H IGBT Module (CM300).
-
REQUEST A QUOTE
- Configuration: Dual / Half-Bridge (2 elements)
- Technology Generation: IGBT 5 (Trench Gate)
- Mounting / Terminals: Panel (Screw) / 7-Pin Tab
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heat-sinking baseplate. This provides simplified thermal management, letting you mount multiple modules to a single common heatsink without external electrical isolation.
- Discrete Free-Wheel Diode: Features integrated, super-fast recovery reverse diodes designed to handle high freewheeling currents and protect the IGBT structure from inductive voltage spikes.
- AC Motor Control: Variable frequency drives (VFDs) and high-power industrial AC drive inverters.
- Servo Controls: Precision motion control systems requiring heavy current handling.
- Uninterruptible Power Supplies (UPS): High-reliability backup power systems.
- Power Management: Battery-powered industrial supplies, solar inverters, and large DC-to-DC converters.
MITSUBISHI CM400DY-24A IGBT Module (CM400).
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Primary Uses: Optimized for general-purpose industrial inverters, AC motor drives, and high-precision servo controls.
- Integrated Diodes: Contains two IGBT transistors connected in a half-bridge layout, each supported by an ultra-fast recovery reverse freewheeling diode.
- Package Footprint: Chassis mount module configuration utilizing a standard multi-terminal layout with M6 nuts for structural power termination.
MITSUBISHI CM400DY-24NF IGBT Module (CM400).
-
REQUEST A QUOTE
- Configuration: Single IGBT with discrete Free-Wheel Diode
- Weight: 270 g / ~0.6 lbs
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heatsink baseplate
- Integrated Free-Wheel Diode: Features a dedicated, super-fast recovery diode connected anti-parallel to handle inductive load current
MITSUBISHI CM450HA-5F IGBT Module (CM450).
-
REQUEST A QUOTE
- Configuration: 1-Element (Single) Packaged as a single switch per module
- Mounting Type: Chassis Mount Heavy-duty bolt-down installation
- Uninterruptible Power Supplies (UPS): Frequently integrated to scale up energy capacity and reinforce industrial backup systems.
- DC Choppers & Converters: Managing voltage transitions in large industrial power feeds.
- Welding Equipment & Power Supplies: Regulating high-current demands safely.
- Datasheets: You can view complete pin configurations and timing diagrams on the Alldatasheet Technical Archive.
MITSUBISHI CM600HU-24F Single-Element IGBT Module (F-Series).
-
- Brand: Mitsubishi Electric
- Model: MR-TB50
- Series: MELSERVO
- Terminal count: 50 pins
- Purpose: Junction terminal block for servo control signals
- Compatible amplifier family: MR-JE-A
- Terminal screw size: M3.5
- Maximum applicable wire: 2 mm²
- Maximum crimp terminal width: 7.2 mm
- Mounting screw size: M4
- Overall length: Approximately 244 mm
- Body height: Approximately 50 mm
- Depth: Approximately 46.5 mm
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-A8NS
- High-Speed Motion Integration: Connects the FR-A800 drive as an extension of a motion controller system, allowing highly synchronized speed and position pulse configurations.
- Position Control Support: Features like position droop pulse clearing (CLRN) can be processed through the network via the host system depending on parameter programming.
- Reduced Wiring: Replaces complex traditional analog/digital control wiring with a single fiber-optic SSCNET cable, minimizing electrical noise interference.
-
REQUEST A QUOTE
- Model / Series: FR-CS82S-025-60 (FREQROL-CS80 Series)
- Input Power Source: Single-Phase 200 to 240 V AC (± 10%), 50/60Hz
- Rated Motor Capacity: 0.4 kW (approx. 0.5 Horsepower)
- Rated Output Current: 2.5 A
- Output Frequency Range: 0.2 to 400 Hz
- Control System: Soft-PWM, General-purpose magnetic flux vector control, or V/F control
- Enclosure Rating: IP20 (Open Type)
- Circuit Board Coating: Type "60" (Indicates conformal coating for improved environmental resistance)
- FR: FREQROL Inverter Series
- Kempston Controls US: Available as a standard stock item for domestic industrial fulfillment.
MITSUBISHI FR-CS82S-025-60 Variable Frequency Drive (FREQROL-CS80).
-
REQUEST A QUOTE
- Model Number: FR-D720S-0.75K-CHT
- Applicable Motor Capacity: 0.75 kW (1.0 HP)
- Input Power: 1-Phase 200–240V AC (±10%)
- Output Voltage: 3-Phase 200–240V AC
- Rated Output Current: 4.2 Amperes
- Output Frequency Range: 0.2 to 400 Hz
- Control System: V/F Control
- Communication Protocol: RS-485 (Modbus-RTU)
- Enclosure Rating: IP20
- Safety Integration: STO (Safe Torque Off)
MITSUBISHI FR-D720S-0.75K-CHT Variable Frequency Drive (FREQROL-D700).
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-E740-5.5K-CHT
- Input Power: Three-phase AC, 380V to 480V at 50/60Hz.
- Output Power: Three-phase AC corresponding to input voltage, with a rated capacity of 9.1 kVA.
- Smart Motor Control: Uses advanced magnetic flux vector control.
- Built-in Dial: Includes a physical control wheel on the front panel. You can use this to quickly change motor speeds or modify settings right on the machine.
- Expandable: Features a built-in USB port for computer setup and a slot to insert option cards for specialized industrial networks (like CC-Link).
-
REQUEST A QUOTE
- Series: FREQROL-E800
- Voltage Class: 200V Class (Three-Phase)
- Rated Capacity: 18.5 kW (~25 Horsepower)
- Ethernet: Standard / Base Model
- Monitor Output: FM Type Terminal
- Enclosure Rating: IP20
- Material Handling: Conveyors, sorting lines, and overhead cranes.
- HVAC Systems: High-capacity industrial fans, blowers, and commercial water pumps.
- Packaging & Textiles: Winders, tension-control machinery, and high-speed packaging lines.
- Food Processing: Industrial mixers, grinders, and automated bottling lines.
MITSUBISHI FR-E820-18.5K-1 Variable Frequency Drive (FREQROL-E800).
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-S520SE-0.75k-KC
- Series: FR-S500 (Specifically S520E sub-series) Compact, transistorized micro-inverter
- Motor Capacity: 0.75 kW (Equivalent to 1 Horsepower / 1 HP) Maximum applicable motor capacity
- Input Power Supply: Single-Phase 200V to 240V AC 50/60Hz frequency tolerance
- Output Power: Three-Phase 200V to 240V AC Converts single-phase input to three-phase output
- Control Platform: RS-485 Serial Communication Integrated digital dial setting and display
- Input Power Terminals: Marked as L1 and N for the single-phase power line connections.
- Output Terminals: Marked as U, V, and W to connect directly to the three-phase motor.
- Ground: Dedicated PE (Earth) terminal to prevent electrical shock.
- Control Interface: Features a built-in RS-485 port for connecting parameter units like the FR-PU04 or network systems.
- Integrated Protection: Built-in electronic thermal overcurrent protection safeguards your motor from overheating.
- Constant-Torque Tuning: Can be configured via parameter settings (Pr. 71 and Pr. 9) to provide 100% continuous torque even at low operational speeds.
- User-Friendly Interface: Uses a digital setting dial making parameter setup and adjustments incredibly quick.
-
REQUEST A QUOTE
- Specification Attribute: Details & Metrics
- Manufacturer: Mitsubishi Electric (MELSEC-F Series)
- Total Built-in I/O: 48 Points (Expandable up to 256 I/O points locally)
- Digital Inputs: 24 Inputs (24V DC, Sink/Source flexible configuration)
- Digital Outputs: 24 Relay Outputs (Normally Open contacts)
- Rated Voltage / Supply: 24V DC (Allowable supply range: 16.8V to 28.8V DC)
- Output Capacity: 2A per point (240V AC or 30V DC max)
- Program Memory: 64,000 Steps (Internal RAM, expandable via optional cassette)
- Execution Speed: High-speed processing (0.065 μs per basic instruction)
- On-board Comms: Integrated RS-422 port; expandable via specialized function boards
MITSUBISHI FX3U-48MR-DS PLC (MELSEC-F FX3U).
-
- Manufacturer: MITSUBISHI
- Model / Part Number: HC-KFS73B
- Rated Output Capacity: 750 W (0.75 kW)
- Supply Voltage Class: 200 VAC class
- Rated Current: 5.8 A (Maximum current: 18.6 A)
- Rated Rotational Speed: 3000 RPM
- Maximum Speed: 4500 RPM
- Rated Torque: 2.4 Nm nominal
- Maximum Torque: 7.2 Nm peak
- Moment of Inertia: 0.0001635 kg·m² (1.635 kg·cm²)
- Feedback Encoder: 17-bit absolute feedback encoder (131,072 p/rev)
- Shaft Design: Standard straight shaft
- Electromagnetic Brake: Built-in / Installed
- Flange Size: 80mm x 80mm mounting
- Dimensions: H 98.1mm x W 82mm x D 217.5mm
- Ingress Protection: IP55 rated (excluding the shaft portion and connector)
- Operating Temperature: 0°C to +40°C ambient
- Storage Temperature: -15°C to +70°C
- Approximate Weight: 2.5 kg to 3.0 kg
- HC-KFS: Low inertia, small capacity series
-
REQUEST A QUOTE
- Manufacturer: MITSUBISHI
- Model / Part Number: HG-KN43J-S100
- Rated Output Power: 400 W (0.4 kW)
- Rated Torque: 1.3 N·m
- Maximum Torque: 3.8 N·m
- Rated Speed: 3,000 r/min
- Maximum Speed: 5,000 r/min
- Rated Current: 2.6 A
- Encoder Resolution: 17-bit feedback resolution (equivalent to 131,072 pulses per revolution) acting as either absolute or incremental
- Environmental Protection: IP65 rated (completely dust-tight and resistant to water jets)
- Shaft Configuration: Straight shaft with a factory-installed oil seal
MITSUBISHI HG-KN43J-S100 Servo Motor. Key specifications include Rated Output Power: 400 W (0.4 kW); Rated Torque: 1.3 N·m; Maximum Torque: 3.8 N·m; Rated Speed: 3,000 r/min.
-
REQUEST A QUOTE
- Insert Type: High-Feed Milling Insert.
- Compatible Tool Body: Optimized for the Mitsubishi AJX12 series cutter bodies.
- Insert Size: 12-size family.
- Chipbreaker Variant: FT (Flat Top) – Specifically designed to deliver higher fracture resistance, making it ideal for rough machining and scaled cast iron.
- Substrate Material: Solid Carbide.
- Application Machine: CNC Machining Centers (optimized for climb milling).
- Coating Type: Physical Vapor Deposition (PVD) AlTiN (Aluminum Titanium Nitride).
- Material Suitability: Broad versatility spanning ISO categories P15–35 (Steel), M15–35 (Stainless Steel), and K15–35 (Cast Iron). It is also certified for workpieces up to a hardness of 45 HRC.
- Key Advantage: Unlike conventional coatings, the Miracle (Al,Ti)N crystalline structure significantly increases heat resistance and coating adhesion strength. This makes it highly stable in environments prone to sudden thermal cracking or heavy edge loading.
MITSUBISHI JDMW120420ZDSR-FT VP15TF Carbide Insert (Mitsubishi).
