Showing 1297–1312 of 2013 results
-
- Brand: Keyence
- Model: LR-ZB100CP
- Series: LR-Z Series
- Sensor type: Self-contained distance-based CMOS laser sensor
- Output: PNP open collector
- Connection: M8 4-pin connector
- Detection distance: 35 to 100 mm
- Response time: 1.5 / 10 / 50 ms selectable
- Light source: 660 nm red laser, Class 1
- Supply voltage: 10 to 30 V DC
- Control output: 100 mA maximum
- Output mode: Light-ON / Dark-ON selectable
- Enclosure: IP68 / IP69K; NEMA 4X, 6P, 13
- Operating temperature: -10 to +50 °C
- Approximate weight: 55 g
-
REQUEST A QUOTE
- Output Rated Voltage: 24 VDC (±5% adjustable via V.ADJ)
- Output Rated Current: 6.5 A
- Total Power Rating: 150 W
- Input Voltage Range: 85 to 264 VAC / 110 to 370 VDC
- Input Frequency: 47 to 63 Hz, DC
- Cooling Method: Natural Air Cooling
- Operating Temp Range: -10 to +55 °C (no freezing)
- Weight: Approx. 700 g (1.54 lbs)
- Dimensions: 6.4 cm × 12.7 cm × 12.7 cm (2.5" × 5.0" × 5.0")
- Visual Diagnostics: The digital LED display minimizes troubleshooting times by allowing operators to quickly check load statuses and voltage stability.
KEYENCE MS2-H150 Measurement Sensor (MS2 Series).
-
REQUEST A QUOTE
- Output Voltage: 24 VDC (±5% adjustable via V.ADJ)
- Rated Output Current: 2.1 A (Class 2 rated)
- Power Rating: 50 W maximum output power
- Input Voltage Range: 85 to 264 VAC / 110 to 370 VDC
- Input Frequency: 47 to 63 Hz, or DC
- Integrated Display: 3-digit, 7-segment LED (10 mm / 0.39" character height)
- Display Resolution: 0.1 A / 0.4 V / 1%
- Mounting Type: Standard DIN Rail mounting
- Termination Type: Screw Terminals
- Weight: Approx. 270 g (9.52 oz)
KEYENCE MS2-H50 Measurement Sensor (MS2 Series).
-
REQUEST A QUOTE
- Specification Category: Attribute
- Output Profile: Rated Output Voltage
- Rated Output Current: 3.2 A
- Rated Power Capacity: 75 W
- Input Profile: AC Input Voltage Range
- DC Input Voltage Range: 110 to 370 VDC
- Input Current Max: 1.9 A (at 100 VAC) / 0.9 A (at 200 VAC)
- Performance: Typical Efficiency
- Startup / Holding Time: ≤ 500 ms / ≥ 20 ms
- Physical & Environmental: Operating Temperature
KEYENCE MS2-H75 Measurement Sensor (MS2 Series).
-
REQUEST A QUOTE
- Primary Function: Converts NPN signal to PNP Open Collector
- Input Voltage Range: 10 to 30 VDC
- Max Control Output Current: 100 mA maximum
- Max Output Voltage: 40 VDC maximum
- Mounting Form Factor: DIN-Rail Mountable
- Built-in Protection: Short-Circuit Protection
- Applicability: Universal (compatible with all NPN sensors, frequently paired with the KEYENCE LR-Z Series)
- System Integration: Simplifies wiring when integrating legacy machinery or sensors into standard PNP-configured control environments (such as modern European or North American PLC architectures).
- Safety & Reliability: The onboard short-circuit protection safeguards upstream PLC inputs and downstream sensor lines from unexpected electrical overloads.
KEYENCE OP-5148 Accessory (OP Series).
-
REQUEST A QUOTE
- Primary Function: Converts a high-density round connector to a standard D-sub interface to allow programming, data transmission, and direct hardware communication.
- Connector A: Round 12-pin female connector.
- Connector B: D-sub 9-pin female connector.
- Cable Length: 0.2 m (20 cm / approx. 8 inches).
- Color: Black.
- Code Readers: Serves as a fundamental connection accessory for the KEYENCE SR-700 Series Ultra-Compact Code Readers.
- System Integration: Frequently used in tandem with components like the OP-27937 (D-sub 9-pin cross cable) or the SR-UR1 (USB converter) to establish standard PC configuration connections.
- Authorized Resources: You can access official documentation, dimensions, and CAD drawings directly through the KEYENCE America OP-80616 Product Page.
KEYENCE OP-80616 Accessory (OP Series).
-
REQUEST A QUOTE
- Component Type: Industrial Ethernet Cable
- Cable Length: 10 meters (~32.8 feet)
- Compliance/Standard: NFPA79 compatible (National Fire Protection Association standard for industrial machinery, ensuring specific flame retardancy and electrical safety markers required in manufacturing environments).
- Weight: 0.4 kg (0.88 lbs)
KEYENCE OP-87232 Accessory (OP Series).
-
REQUEST A QUOTE
- Manufacturer: Keyence
- Model / Part Number: OP-87272
- Cable Type: M12 connector cable
- Sensor-Side Connector: M12 4-pin female, straight
- Control-Side Connection: Flying leads
- Length: 5 m
- Jacket Material: PVC
- Compatibility: M12 4-pin sensors, fiber optic sensors, and safety light curtains
Keyence OP-87272 Cable. Contact us for product information and quotation.
-
REQUEST A QUOTE
- Product Type: Adjustable mounting bracket
- Manufacturer: KEYENCE Corporation
- Part Number: OP-87910
- Weight: Approximately 20 grams (0.07 lbs)
- Country of Origin: Japan
- Compatibility: Keyence IV, IV2, and IV3 Series Vision Sensor Heads
- Material/Design: Robust metal construction built to reduce vibrations and ensure industrial durability
- North America: Access the PDF datasheet and manual downloads on the KEYENCE America OP-87910 Product Page.
- Canada: Review complete technical specs and 3D PDF files via the KEYENCE Canada Portal.
- Southeast Asia: Download files on the KEYENCE Malaysia Model Hub or the KEYENCE Singapore Hub.
KEYENCE OP-87910 Mounting Bracket (OP Series).
-
REQUEST A QUOTE
- Type: Sensor-to-controller connection cable.
- Connector Type (Sensor End): 4-pin M12 standard connector, straight orientation.
- Connector Type (Controller End): Dedicated Keyence controller-side interface.
- Cable Length: 2 meters (6.56 feet).
- Insulation Material: PVC (Polyvinyl chloride).
- Wire Gauge: 24 AWG.
- Rated Voltage: DC 24V.
- Weight: Approx. 75 grams (2.65 ounces).
- Compatible Sensors: Primarily used for the LR-T Series (Self-contained TOF Laser Sensors).
- Compatible Controllers: Connects directly into the MU-N Series (Multi-Sensor Controller Network communication units).
KEYENCE OP-88025 Accessory (OP Series).
-
REQUEST A QUOTE
- Model Number: OP-88680
- Component Type: Control / Connection Cable
- Cable Length: 10 m (32.8 ft)
- Standards & Compliance: CE Marking, UL Listing (US), and UL/CSA standard conformity.
- SR-X Series: Used with AI-Powered Code Readers for signal routing and I/O control.
- SR-L Series: Integrates directly with High-Speed Label Code Readers.
- Models: High-Speed Label Code Reader – SR-L series
- Models: AI-Powered Code Reader – SR-X series – Keyence
KEYENCE OP-88680 Accessory (OP Series).
-
REQUEST A QUOTE
- Compatible System: KEYENCE SL-V Series Safety Light Curtains
- Supply Voltage: 24 VDC ± 10%, Ripple (P-P) ≤ 10%
- Current Consumption: ≤ 100 mA at 24 VDC (Terminal alone)
- Output Type: Force-guided safety relay outputs (FSD1, FSD2)
- Resistive Output Load: 230 VAC / 4 A, 30 VDC / 2 A
- Inductive Output Load: 230 VAC / 2 A, 30 VDC / 1 A
- Response Time: ON → OFF: 6 ms | OFF → ON: 15 ms
- Service Life: Mechanical: ≥ 10 Million cycles | Electrical: ≥ 100,000 cycles
- Physical Weight: Approx. 330 g (11.64 oz)
- Safety Category: Type 4 ESPE (IEC 61496-1), Category 4 PLe (ISO 13849-1:2015)
KEYENCE SL-T11R Relay Terminal (SL Series).
-
REQUEST A QUOTE
- Sensor & Resolution: CMOS monochrome sensor with 900×900 (2D) or 1280×900 (Barcode) resolution.
- Lighting & Focus: High-intensity red/blue LEDs with a fixed 30mm focal distance.
- Performance: Reads 2D (down to 0.127mm) and 1D barcodes (down to 0.1mm).
- Connectivity & Power: Bluetooth 2.1 + EDR (approx. 10m range) and USB 2.0. Offers ~10 hours (10,000 reads) of battery life.
- Durability: IP54 rating with 2.0-meter drop resistance (up to 50 times).
- Dimensions: 214 x 78.5 x 97.4 mm; Approx. 375g.
- Advanced Imaging: Utilizes automatic multi-lighting control (polarized, multi-angle) to manage glare on challenging surfaces.
- Smart Tuning: Features one-touch automatic calibration for exposure and decoding.
- Ergonomics: Designed with an optimized center-of-gravity for improved user comfort.
- Operating Conditions: 0 to +45 °C (32 to 113 °F) with 35–95% RH.
KEYENCE SR-G100 Code Reader (SR-G Series).
-
REQUEST A QUOTE
- Image Sensor: CMOS Image Sensor
- Resolution: 2.3 Megapixels (1920 × 1200 pixels)
- Focus Type: Automatic Tuning / Autofocus
- Reading Distance: 70 to 1000 mm (2.76 to 39.37 inches)
- Illumination Source: High-intensity Red/White LED built-in
- Pointer Source: High-intensity Green LED pointer
- Power Supply: 24 VDC Input (PoE models designated as SR-X300P)
- Operating Temp: 0 to +45°C (32 to 113°F)
- PROFINET: Direct connection support for Siemens S7-1200, S7-1500, and S7-300 systems.
- EtherNet/IP: Easy handshaking and data mapping directly into PLC tags.
KEYENCE SR-X300 AI Code Reader (SR-X Series).
-
REQUEST A QUOTE
- Specification Category: Attribute
- Display Panel: Screen Size
- Display Element: TFT LCD
- Resolution: XGA (1024 × 768 dots)
- Display Colors: 16 million colors
- Backlight System: White LED (Non-replaceable, ~50,000 hrs life)
- Touch Interface: Touch System
- Operating Force: 0.98 N or less
- Actuation Lifespan: 1 million operations or more
- Memory & Storage: Internal Screen Data
KEYENCE VT5-X10 Controller (VT5 Series).
-
REQUEST A QUOTE
- Input Voltage Range: 24 VDC ~ 70 VDC
- Output Phase Current: 2.4 A ~ 8.0 A (Peak)
- Step Resolution: Up to 25,600 steps/rev
- Compatible Motors: 2-Phase Hybrid Steppers
- Over-Voltage Protection: > 85 VDC
- Low-Voltage Protection: < 15 VDC
- Cooling Method: Natural Air / Cooling by Air
- Operating Temperature: 0°C to +40°C
- Dimensions & Weight: 118 × 75.5 × 34 mm
- Auto-Current Reduction: When the motor stops spinning, the drive automatically scales down the idle current. This significantly lowers standby power consumption, reduces motor heat generation, and expands motor lifetime.
KINCO 2CM880 PLC (KINCO).
