Showing 1905–1920 of 2013 results
-
REQUEST A QUOTE
- Operating Pressure Range: 0 to +1.0 MPa (Approx. 0 to 150 PSI)
- Proof Pressure: Maximum +1.5 MPa
- Power Supply: 12 to 24 VDC
- Current Consumption: ~55 mA to 80 mA maximum
- Enclosure Rating: IP67 (dust-tight and water-resistant)
- Display: 2-color digital display with unit-switching functions
SMC ISE70-F02-65 Digital Pressure Switch (ISE70).
-
REQUEST A QUOTE
- Applicable Fluids: Air, non-corrosive gas, non-flammable gas
- Rated Pressure Range: 0.0 to 1.0 MPa (0 to 10 bar)
- Display Pressure Range: -0.1 to 1.0 MPa
- Proof / Withstand Pressure: 1.5 MPa
- Power Supply Voltage: 12 to 24 VDC ±10%
- Current Consumption: ≤ 55 mA
- Switch Output: 2 Outputs (Selectable NPN / PNP open collector)
- Enclosure Rating: IP67 (dust-tight and water-resistant protection)
- Display Accuracy: ±2% F.S. ±1 digit
- Repeatability: ±0.5% F.S.
SMC ISE70-F02-L2 Digital Pressure Switch (ISE70).
-
REQUEST A QUOTE
- Connection Type: 6mm One-touch push-in tube connection x M5 x 0.8 Male metric thread.
- Seal Method: Gasket seal.
- Operating Pressure: -100 kPa to 1 MPa (-1 bar to 10 bar), making it suitable for both vacuum and positive pressure applications.
- Temperature Range: -5°C to 60°C for compressed air (no freezing), and 0°C to 40°C for liquid water applications.
- Materials: Polybutylene Terephthalate (PBT) resin body, brass thread, and a Polyoxymethylene (POM) release button.
- Tubing Compatibility: Accepts nylon, soft nylon, and polyurethane tubes.
SMC KQ2L06-M5A One-Touch Fitting (KQ2 Series).
-
REQUEST A QUOTE
- Bore Size: 16 mm
- Stroke Length: 30 mm
- Gripping Width: 98 mm when fully open; 68 mm when closed
- Holding Force: 45 N (both internal and external) at 72 psi / 0.5 MPa
- Operating Pressure: 15 to 87 psi (0.1 to 0.6 MPa)
- Port Size: M5 x 0.8
- Temperature Rating: 14°F to 140°F (-10°C to 60°C)
- Double Piston Construction: Delivers a compact profile while maintaining a significantly large holding force.
- Synchronized Parallel Motion: A rack-and-pinion design ensures both fingers travel perfectly together.
- Versatile Mounting: Supports both axial (via tapped body or through-hole) and lateral mounting configurations.
SMC MHL2-16D Air Gripper (MHL2).
-
- Manufacturer: SMC
- Model / Part Number: MHZJ2-10D
- Gripping Force: Approximately 17 Newtons (N) when closing and 19.8 N when opening at 72 psi.
- Stroke Length: 4 mm of total finger movement.
- Operating Pressure: 29 psi to 102 psi (0.2 to 0.7 MPa).
- Repeatability: ±0.01 mm for highly precise, repetitive tasks.
- Port Size: M3 x 0.5 female threads for air line connections.
- Temperature Range: 14°F to 140°F (-10°C to 60°C).
- Linear Guide Rails: The finger mechanisms travel along a built-in guide rail. This prevents the fingers from twisting or shaking under heavy loads.
- Flexible Mounting: The square body has screw holes on three different sides. You can bolt it down in five different position styles depending on your machine layout.
- Auto-Switch Ready: The outer housing features specialized slots. You can slide magnetic sensors (like the SMC D-M9 series) into these slots to let your main computer know if the gripper is currently open or closed.
-
- Brand: SMC
- Model: MSQB20R
- Series: MSQ
- Mechanism: Rack and pinion
- Body type: MSQB basic type
- Size: 20
- Cushioning: Internal shock absorber
- Pneumatic ports: M5
- Auto switches: Not fitted
- Magnet: Built in
-
- Brand: SMC
- Model: PSE530-M5
- Series: PSE530
- Pressure type: Positive pressure
- Rated pressure range: 0 to 1 MPa
- Proof pressure: 1.5 MPa
- Pressure port: M5 × 0.8
- Output: Analog voltage, 1 to 5 V DC
- Supply voltage: 12 to 24 V DC
- Current consumption: 15 mA maximum
- Applicable fluids: Air, non-corrosive gas and non-flammable gas
- Accuracy: ±2% full scale or less at 25 °C
- Enclosure: IP40
- Operating temperature: 0 to +50 °C
- Body material: SUS303
- Weight without cable: 7 g
-
REQUEST A QUOTE
- Actuation Type: 3-Position Closed Center (Double Solenoid)
- Rated Voltage: 24V DC (designated by the "-5" code)
- Mounting Style: Base Mounted (without a sub-plate unless ordered via variant -02 or -03)
- Electrical Entry: DIN Terminal with connector (designated by the "Z" code)
- Indicator & Protection: Built-in LED light and surge voltage suppressor
- Fluid: Compressed Air
- Operating Pressure Range: 0.1 to 0.7 MPa (Internal Pilot)
- Max Fluid/Ambient Temp: 50°C (122°F)
- Manual Override: Non-locking push style
SMC SY7340-5DZ 5-Port Pneumatic Solenoid Valve (SY7000 Series).
-
REQUEST A QUOTE
- Voltage: 380V AC (50Hz)
- Current: 0.3A
- Power Output: 110W
- Rotational Speed: 2600 RPM
- Dimensions: 225 mm (Diameter/Length) × 225 mm (Width) × 99 mm (Height)
- Wiring Setup: 4-wire configuration
SOK MOTOR 225FHJ2WYS5-2T01 380V Centrifugal Cooling Fan (225FHJ Series).
-
REQUEST A QUOTE
- Contact Configuration: 3PST: 2 N/C (Safety Contacts) + 1 N/O (Auxiliary Contact)
- Max Rope Span: Up to 40 meters (131 feet)
- Electrical Rating: 6A at 120V AC / 3A at 240V AC; 2.5A at 24V DC
- Conduit / Wiring Entry: 3 x M20 conduit entries
- Ingress Protection: IP67 / NEMA 6 (Water washdown proof)
- Housing Material: Heavy-duty die-cast aluminum with a stainless steel eye nut
- Operating Temperature: -25°C to 80°C (-13°F to 176°F)
- Reset Mechanism: Blue reset knob/button
- Built-in Tension Indicator: Features an integrated visual indicator window to make initial rope tensioning setup and system maintenance simple and precise.
- Vibration Tolerant: Uses snap-acting switch contacts to protect against accidental machine trips caused by industrial vibrations.
- Dual-Sided Mounting: The blue reset knob can be utilized for either left-side or right-side pull string configurations.
- Safety Certifications: Conforms to strict global safety rules including IEC947-5-1, IEC947-5-5, EN418, UL508, and BS5304.
Sti ER5018-021M Rope-Pull Emergency Stop Switch (ER5018 Series).
-
REQUEST A QUOTE
- Shape & Angle: C-shape, 80° diamond configuration with a 0° relief angle (negative rake).
- Dimensions: Features a 1/2-inch inscribed circle (IC), a thickness of 3/16 inch (4.76 mm), and a hole diameter of 0.2031 inches.
- Nose Radius: 0.8 mm (0.0313 inches), which yields robust edge strength and durability.
- Cutting Edges: 4 highly stable cutting edges per insert (double-sided).
- SU/ESU Chipbreaker Geometry: Purpose-built for low-resistance cutting, achieving lower tool deflection and optimal chip control during light to medium general-purpose operations.
SUMITOMO CNMG120408N-SU AC630M Carbide Turning Insert (SUMITOMO).
-
REQUEST A QUOTE
- Insert Style (ISO 1832): VNMG – 35 degree diamond shape, 0 degree clearance (negative)
- Tolerance Class (ISO 1832): M
- Chipbreaker Style: G (cylindrical hole with double-sided chipbreaker)
- Cutting Edge Length (IC): 16 mm
- Insert Thickness: 4.76 mm
- Insert Hole Diameter: 8.1 mm
- Chipbreaker Type: N-GU (finishing positive-geometry chipbreaker)
- Grade: AC630M (Sumitomo PVD-coated carbide, ISO M-class stainless steel machining)
- Typical Application: Turning and finishing of austenitic stainless steels (ISO M)
SUMITOMO VNMG160408N-GU AC630M Carbide Turning Insert (SUMITOMO).
-
REQUEST A QUOTE
- Insert Shape: Parallelogram / Rhombic shape
- Insert Size: 0940 (0.1575 in thickness, 0.378 in length)
- Corner Radius: 0.0315 in
- Chipbreaker Geometry: -G Type (General-purpose geometry featuring a positive rake angle architecture to lower cutting forces and promote smooth chip evacuation)
- Material Grade: ACP300
- Substrate: High-toughness carbide engineered heavily for fracture resistance.
- Coating: PVD multi-layered nano-structured TiAlN/AlCrN coating.
- Application Focus: Ideal for heavy-duty or interrupted machining under unstable conditions in steel (ISO P20–P40) and stainless steel (ISO M20–M40).
Sumitomo WDXT094008-G ACP300 Carbide Drill Insert (SumiDrill WDX Series).
-
REQUEST A QUOTE
- Shape & Geometry: Trigon (W-shape), 80° included angle with a negative clearance angle.
- Inscribed Circle (IC): 0.500 inches (12.7 mm)
- Thickness: 0.187 inches (4.76 mm)
- Corner Radius: 0.031 inches (0.8 mm) for robust edge strength
- Chipbreaker (GU): Features a contoured positive rake angle designed to lower cutting resistance, suppress heat accumulation, and improve chip evacuation during stainless steel profiling.
SUMITOMO WNMG080408N-GU AC630M Carbide Turning Insert (SUMITOMO).
-
REQUEST A QUOTE
- ISO Designation: WNMG080408N-GU
- ANSI (Imperial) Sizing: WNMG 432-GU
- Insert Shape: Trigon 80° (W-Style)
- Clearance Angle: 0° (Negative Insert)
- Inscribed Circle (IC): 12.7 mm (1/2")
- Thickness: 4.76 mm (3/16")
- Corner Radius: 0.8 mm (1/32")
- Cutting Edges: 6 useable edges (double-sided)
- Primary Application: ISO P25–P40 Framework (Carbon steels, alloy steels, structural forge components).
- Coating Type: CVD Absotech Platinum / Super FF Coat.
SUMITOMO WNMG080408N-GU AC830P Carbide Turning Insert (SUMITOMO).
-
REQUEST A QUOTE
- Type / Operation: Solenoid Valve, Normally Closed (Nor.Close)
- Size: 15A
- Compatible Medium: Water
- Operating Voltage: 100V AC (50/60Hz) or 110V AC (60Hz) (Note: Replacement coils are also manufactured for 220V systems)
- Operating Pressure Range: 0 to 0.6 MPa
- Proof Test Pressure: 1.5 MPa
- Electrical Connection: Typically equipped with a Hirschmann style (GDM) connector
- Unit Weight: Approximately 1.15 kg (complete unit)
SUN JDSPE7-15WLIPJ Electric Solenoid Valve (JDSPE7 Series).
