Showing 1601–1616 of 2013 results
-
REQUEST A QUOTE
- Model Number: H7BX-AW AC100-240
- Supply Voltage: 100 to 240 V AC (50/60 Hz)
- Display Range: 6 digits (-99999 to 999999)
- Digit Height: 13.5 mm (Main PV) / 9.5 mm (Sub SV)
- Counting Speed: Selectable 30 Hz or 5 kHz
- Input Methods: No-voltage (NPN) or Voltage (PNP) selectable
- Control Outputs: 2-stage relay output (SPST-NO, 3 A at 250 VAC)
- Dimensions: 72 mm W × 72 mm H × 100 mm D
- IP Rating: IP54 front panel (dust-protected and water-resistant)
- Preset Counters: Configurable as a 1-stage or 2-stage preset counter to actuate relays at target metrics.
OMRON H7BX-AW AC100-240V Digital Counter / Tachometer (H7BX).
-
REQUEST A QUOTE
- Display Type: 9-inch wide TFT LCD screen with a black frame.
- Resolution: 800 × 480 pixels supporting over 16.7 million colors.
- Touch Technology: Resistive touch interface.
- Storage / Memory: Features built-in SD card and USB peripheral support.
- Environmental Protection: Front side IP65 and NEMA 4X rated enclosure for protection against dust and fluid spray.
- Dimensions: 290 mm width × 190 mm height, requiring a 260 mm × 165 mm panel cutout.
OMRON NA5-9W001B-V1 Human-Machine Interface (HMI) (Sysmac NA).
-
REQUEST A QUOTE
- Display Type: 10.4-inch TFT Active Matrix Screen
- Resolution: 640 × 480 dots (VGA)
- Touch Panel: Analog resistive type (operable with gloves)
- Backlight: Long-life LED backlight
- Power Consumption: 25 W
- Input Voltage: 24 VDC
- Enclosure Color: Black case
- Software Support: Programmed using CX-Designer software
OMRON NS10-TV00B-ECV2 Human-Machine Interface (HMI) (NS Series).
-
REQUEST A QUOTE
- Display: 5.7-inch Color TFT LCD with LED backlight, 320 x 240 pixel (QVGA) resolution, supporting up to 256/32k colors.
- Safety Features: Integrated Red Emergency Stop Button (DPST-NO output configuration) and 10 built-in function buttons.
- Memory & Storage: 60 MB internal application memory alongside a CompactFlash (CF) card slot.
- Enclosure & Protection: Rugged black case with an IP65 protection rating against water and dust ingress.
- Power Supply: Standard industrial 24 VDC (allowable range: 20.4 to 27.6 VDC) with a maximum consumption of 10W.
- Connectivity: 9-pin D-sub connector and 1 USB port for programming/maintenance. This specific model does not include a built-in Ethernet port.
OMRON NSH5-SQR10B-V2 Handheld Programmable Terminal (NS Series).
-
REQUEST A QUOTE
- Display Type: 5.7" Monochrome STN LCD with backlight
- Resolution: 320 × 240 pixels
- Frame Color: Black (indicated by the "B" in the part number; the beige counterpart is NT31-ST123-EV3)
- Power Supply: 24 VDC
- Power Consumption: 15 Watts
- Enclosure Rating: IP65 front panel protection
- Communication Interfaces: Built-in RS-232C, RS-422A, and RS-485 ports supporting Host Link and high-speed NT Link
- Software: Configuration requires the NT Support Tool.
- No USB Support: This model does not feature a USB port. Data backup and uploads must be performed via serial communication using an RS-232C interface or a compatible USB-to-Serial adapter.
- System Menu Access: To force the unit into transmit mode, press and hold any two corners of the touchscreen simultaneously for 2 to 3 seconds. The touch areas are notoriously small, so multiple attempts may be necessary.
OMRON NT31-ST123B-EV3 Programmable Terminal (NT31).
-
REQUEST A QUOTE
- Number of Points: 16 digital outputs.
- Rated Voltage: 24 VDC (Operating load range of 15.0 to 28.8 VDC).
- Maximum Current: 0.5 A per point, capped at a maximum of 4 A total per unit.
- ON/OFF Response Time: 0.5 ms maximum OFF-to-ON delay / 1.0 ms maximum ON-to-OFF delay.
- Connection Method: 1-wire connection layout using a detachable push-in (spring-clamp) terminal block.
- Protection: Short-circuit protected outputs.
- Refreshing Methods: Supports Free-Run, Standard Speed, and Synchronous I/O refreshing (synchronizes directly with the controller cycle when connected via EtherCAT).
Omron NX-OD5256 Digital Transistor Output Unit (NX Series).
-
REQUEST A QUOTE
- Control Method: Pulse train / Pulse input control
- Rated Output Capacity: 0.4 kW (400 W)
- Input Supply Voltage: 200–230 V AC, Single-phase (50/60 Hz)
- Load Current/Voltage: 2.5 A / 200 V load
- Compatible Motors: R88M-G40030H / R88M-GP40030H
- Mounting Type: Chassis Mount
- Operating Temperature: 0°C to +55°C
- Compliance: RoHS3 Compliant, Reach Unaffected
OMRON R7D-BP04H Servo Drive (SmartStep 2).
-
REQUEST A QUOTE
- Rated Output Power: 400 W (0.4 kW)
- Main Circuit Input Voltage: Single-phase 200 to 240 VAC (170 to 252 V)
- Control Circuit Voltage: 24 VDC (21.6 to 26.4 V)
- Current Output Rating: 2.3 A
- Supported Encoder: 23-bit high-resolution multi-turn (battery-free)
- Physical Dimensions: 223 mm (H) × 55 mm (W) × 196.05 mm (D)
- Weight: Approx. 1.5 kg
- Built-in Safety (STO): Features a hardwired Safe Torque Off (STO) conforming to PLe (EN ISO 13849-1) and SIL3 (IEC 61508) standards, alongside network-based STO capabilities.
- Advanced Architecture: Equipped with screw-less, push-in pluggable connectors to facilitate rapid pre-wiring, reducing overall installation and maintenance times.
- Integrated Brake Control: An embedded relay allows direct motor brake control without requiring external components.
OMRON R88D-1SN04H-ECT AC Servo Drive (1S Series).
-
- Manufacturer: OMRON
- Model / Part Number: S82K-05024
- Input Voltage: 100 to 240 Volts AC (Universal input)
- Output Voltage: 24 Volts DC (Adjustable)
- Output Current: 2.1 Amperes
- Power Rating: 50 Watts
- Mounting Style: DIN Rail (it clips onto a standard metal rail inside electrical boxes)
-
- Manufacturer: OMRON
- Model / Part Number: S82K-10024
- Input Voltage: Universal input handling 100–120V AC or 200–240V AC (50/60Hz).
- Output Voltage: 24V DC.
- Output Current: Around 4.2A to 4.5A.
- Total Power: 100W to 108W.
- Mounting Type: Built to snap directly onto a standard DIN rail.
-
REQUEST A QUOTE
- Output Voltage: 12 VDC (Adjustable)
- Output Current: 4.3 A
- Rated Power: 50 W
- Input Voltage (AC): 100 to 240 VAC nominal (Permissible: 85 to 264 VAC)
- Input Voltage (DC): 80 to 370 VDC permissible
- Efficiency: 86% typical
- Number of Outputs: 1 branch
- Isolation Voltage: 3 kV
- MTBF: 135,000 hours
- Physical Housing: Enclosed style featuring a durable metal frame with an integrated DIN-rail mounting bracket.
OMRON S8FS-G05012CD Switching Power Supply (S8FS-G).
-
- Manufacturer: OMRON
- Model / Part Number: S8FS-G10024CD
- Output Voltage: 24 VDC
- Output Current: 4.5 A
- Rated Power: 100 W
- AC Input Voltage: 100 to 240 VAC, single-phase
- DC Input Voltage: 80 to 370 VDC
- Efficiency: Up to 89%
- Mounting: DIN rail or direct panel mounting
- Connection: Screw terminal blocks
- Operating Temperature: -20 to 70 °C
-
REQUEST A QUOTE
- Output Wattage: 60 W
- Output Voltage: 24 VDC (Adjustable from -10% to +15% via front potentiometer)
- Output Current: 2.5 A
- Input Voltage Range: Universal 85 to 264 VAC (100–240 VAC nominal) or 90 to 350 VDC
- Efficiency: 88%
- Operating Temperature: -25°C to +60°C
- Protection & Safety: IP20 rating, overload protection, and certifications for UL508, CSA C22.2, and EN50178.
- Physical Profile: Compact book-type enclosure with an enhanced vibration-resistant DIN rail mounting clip.
OMRON S8VK-C06024 DIN Rail Power Supply (S8VK-C).
-
REQUEST A QUOTE
- Input Voltage Range: Universal 85 to 264 VAC (single-phase) or 90 to 350 VDC
- Output Voltage: 12 VDC (adjustable via a front trimmer potentiometer from -10% to +15%)
- Rated Current: 2.5 A
- Power Boost Function: Supports 120% output current power boost for temporary peak loads
- Efficiency: 82% typical
- Operating Temperature: Extremely wide range from -40°C to 70°C (-40°F to 158°F)
- Safety & Protections: Automatic reset overload protection, overvoltage protection, and UL Class 2 output compliance
OMRON S8VK-G03012 DIN Rail Power Supply (S8VK-G).
-
REQUEST A QUOTE
- Manufacturer: OMRON
- Model / Part Number: S8VS-48024A
- Power Rating: 480 Watts
- Output Profile: 24 VDC output voltage, adjustable from -10% to +15% using a built-in potentiometer. Continuous output current is 20 A, with a maximum peak capacity of 30 A.
- Input Range: Universal 100 to 240 VAC nominal input voltage (with an operational variance range of 85 to 264 VAC). It can also accept an 80 to 370 VDC input under specific conditions.
- Efficiency: Typically reaches 89% at 100 VAC input and scales up to 93% at 200 VAC input.
- Form Factor & Dimensions: Measures roughly 5.01" L x 5.91" W x 4.53" H (127.2 mm x 150.1 mm x 115.0 mm) and mounts securely onto standard 35mm DIN rails.
- Safety Certifications: UL 508 listed, cULus, cURus, CE, and VDE compliant. Includes built-in overvoltage and overload protection.
OMRON S8VS-48024A Switching Power Supply. Key specifications include Power Rating: 480 Watts; Output Profile: 24 VDC output voltage, adjustable from -10% to +15% using a built-in potentiometer. Continuous output current is 20 A, with a maximum peak capacity of 30 A.; Input Range: Universal 100 to 240 VAC nominal input voltage (with an operational variance range of 85 to 264 VAC). It can also accept an 80 to 370 VDC input under specific conditions.; Efficiency: Typically reaches 89% at 100 VAC input and scales up to 93% at 200 VAC input..
-
REQUEST A QUOTE
- Number of Positions / Poles: 40 points
- Rated Voltage: 125 VAC / 24 VDC
- Rated Current: 1 A
- Connector Type (PLC Side): MIL Connector (Plug/Male, XG4A-4031)
- Terminal Block Type: Passive wiring interface with M3 captive screws
- Wiring Polarity: NPN / PNP compatible
- Terminal Pitch: 7 mm
- Insulation Resistance: 100 MΩ minimum (at 500 VDC)
- Dielectric Strength: 500 VAC for 1 minute (leakage current: 1 mA max)
- Operating Temperature: 0°C to +55°C
OMRON XW2D-40G6 Connector-Terminal Block Conversion Unit (XW2D).
