Showing 241–256 of 279 results
-
REQUEST A QUOTE
- Sensing Range: 80 mm to 2,000 mm
- Output Type: PNP, switchable Normally Open (NO) / Normally Closed (NC)
- Connection: 5-pin M12 x 1 connector
- Operating Voltage: 10 to 30 V DC
- Switching Frequency: 3.3 Hz
- Environmental Rating: IP65
- Key Features: Integrated temperature compensation, 5 configurable output functions, synchronization capabilities to prevent cross-talk, and high insensitivity to compressed air.
PEPPERL+FUCHS UB2000-30GM-E5-V15 Ultrasonic Proximity Sensor (UB2000).
-
REQUEST A QUOTE
- Sensor Type: Contactless 80 GHz Radar Level Sensor
- Model / Series: VEGAPULS 31 (PS31.XXXXXGMHB)
- Measuring Range: Up to 20 meters (65.6 ft)
- Accuracy: ±2 mm
- Output Signal: 4-20 mA / HART (2-wire loop powered)
- Process Connection: 1.5" G/BSP threaded mounting
- Housing Material: PVDF body with Fluorelastomer seals
- Technology: 80 GHz high-frequency radar for non-contact measurement
RA-222229 Vega Radar Level Transmitter.
-
REQUEST A QUOTE
- Voltage & Power: 24VDC operating voltage with a power rating under 50VA.
- Current Output: 1.8A max solenoid current rating.
- Signal Input: Command value input range of ±9 V / ±10 V.
- Form Factor: Euro-card format featuring an integrated 32-pin male multipoint connector (Form D/DIN 41612) for effortless mounting in 19-inch racks or card holders.
- Adjustability: Features onboard potentiometers allowing for the custom adjustment of up to 4 distinct command values.
REXROTH R900579497 Proportional Valve Amplifier (VT 5035).
-
REQUEST A QUOTE
- Pressure Range: Measures up to 400 bar (approx. 5,800 psi) as specified by the model code, within a broader product family capable of up to 630 bar.
- Signal Output: 4 to 20 mA analog current output, which includes DNV-GL marine approval.
- Electrical Connection: Standard M12x1 connector, 4-pole, A-coded.
- Hydraulic Port: G1/4 parallel thread with an integrated throttle element in the pressure channel to minimize pressure peaks.
- Accuracy: < 0.5% Full Scale (FS) accuracy class, with an outstanding non-repeatability of less than 0.05%.
- Operating Temperature: Extends from –40 °C to +85 °C (–40 °F to 185 °F).
- Response Time: Fast dynamic response with a signal rise time of < 1 ms.
- Premium Material Construction: Features a robust thin-film measuring cell. All internal components exposed to the fluid media are crafted from durable stainless steel to resist corrosion.
- Integrated Protections: Built-in safeguards protect the unit against overvoltage, reversed polarity, and short circuits.
- Application Scope: Extensively utilized across SANY excavator parts, automated manufacturing lines, industrial power units, pumps, and valves.
REXROTH R901342033 Hydraulic Pressure Transducer (Rexroth).
-
REQUEST A QUOTE
- Brand/Manufacturer: Line Seiki
- Panel Size: 48 × 48 mm (DIN standard, cutout size 45 × 45 mm)
- Display Type: 6-Digit LCD with high-brightness backlight (10mm x 5mm digit size)
- Preset Configuration: 1-Level Preset
- Power Source: AC 100–240V (-15% to +10%)
- Input Options: Contact, Open Collector, or Voltage input (selectable)
- Counting Speeds: 30 Hz, 1 kHz, or 5 kHz (selectable)
- Count Modes: Addition, Subtraction, and 90-degree phase difference (quadrature) input
- Individual Digit Keys: The front interface features dedicated keys for each of the 6 digits, making manual adjustments fast and frictionless.
- Pre-scale Function: Allows scale factors ranging from 0.001 to 99.999 to accurately convert raw pulses into physical units like meters, liters, or pieces.
- Free Write Capability: Permits setting an arbitrary starting value from which the unit will add or subtract.
- Built-in Memory: Features an E²PROM backup mechanism that retains counting data and program configurations even during unexpected power losses.
- Environmental Protection: Rated at IP54 on the front panel, providing adequate resistance against dust and oil droplets in rugged industrial environments.
Rhein G48-305 Electronic Preset Counter (G48 Series).
-
REQUEST A QUOTE
- Form Factor: Standard M18 cylindrical threaded metal tube body.
- Threaded Length: 35 mm barrel for easy positioning and mounting adjustments.
- Sensing Type: Through-beam / Opposing, which relies on a separate emitter and receiver to detect when an object breaks the light beam.
- Operating Voltage: DC 12–24V, a standard threshold for industrial PLC equipment and control logic units.
- Enclosure Rating: Built with a rugged ABS barrel / tube structure optimized to handle dust, dampness, and vibrations in demanding factory environments.
- Machinery Specialists: Global industrial spare parts logistics sites, such as Al Mahir Machinery, supply these sensors directly to factories and maintenance teams.
RIKO MF-5KP2 Through-Beam Photoelectric Sensor (MF Series).
-
REQUEST A QUOTE
Technical Specifications
- Sensor Type: Photoelectric Sensor / Solid State Switch.
- Form Factor: Standard M18 cylindrical industrial housing.
- Barrel Material: ABS plastic body, engineered for resilience in factory environments.
- Dimensions: Threaded body length of 35 mm.
- Operating Voltage: DC 12–24V.
- Termination & Mounting: Multi-core cable connection designed for through-hole mounting.
- Compatibility: Directly replaces older or variant MF-5KP2 configurations.
RIKO RMF-5KP2 Photoelectric Sensor (RMF Series).
-
REQUEST A QUOTE
- Measuring Range: 0.2 to 4.0 mm (0.01 to 0.16 inches) of single sheet thickness.
- Target Material: Ferrous materials only (magnetic steel sheets).
- Physical Dimension: Threaded body size of M42 x 1.5.
- Enclosure Rating: IP65 dust and water resistance.
- Ambient Operating Temperature: 0°C to 60°C (30°F to 140°F).
- Weight: Approx. 0.42 kg (0.93 lbs).
- Connection Type: Pluggable interface utilizing an M12 plug connector (sold without cable; compatible with straight or 90° angled cable plugs).
- Mounting Accessories: Ships with 2 flat nuts. It is designed to be paired with spring-loaded sensor brackets, such as the Roland SHX42 or SHS42GS brackets, to ensure reliable surface contact.
- Air Gap Tolerance: The P42AGS features exceptionally high air gap tolerance. For instance, when processing a 2.0 mm thick ferrous sheet at a 120% double sheet threshold, it can tolerate an air gap of up to 0.5 mm between the sensor and the first sheet, or up to 3.0 mm between overlapping sheets.
- Non-Destructive Sensing: Utilizing electromagnetic fields instead of permanent magnets, the sensor exerts no residual magnetic force on the metal blanks after the measurement is finished.
Roland P42AGS Double Sheet Detection Sensor (P42 Series).
-
REQUEST A QUOTE
- Humidity Range: 0 to 100% RH.
- Temperature Range: -50 to 100 °C (-58 to 212 °F).
- Standard Accuracy: ±0.8% RH and ±0.1 K (at 10 to 30 °C).
- Output Signals: Two scalable, linear analog outputs (0 to 1 V) and a digital UART serial interface.
- Power Supply: 3.3 to 5 VDC with a low current consumption of ~5 mA.
- Model: Accuracy Class Primary Housing Material Best For
- Hot-Swappable Design: Probes can be swapped out instantly for calibration or maintenance without system downtime.
- Smart Electronics: The built-in AirChip tracking logs internal calibration data, records asset history, and executes auto-diagnostics.
- Flexible Integration: Connects seamlessly with transmitters (such as the HF5 or PF4 series), handheld data loggers, or standalone OEM equipment.
Rotronic HC2A-S Humidity Temperature Probe (HC2A Series).
-
REQUEST A QUOTE
- Operating Voltage: 24 V AC/DC (Solenoid control voltage)
- Contact Configuration: 6 contacts in total
- Locking Mechanism: "Power to Unlock" (Solenoid must be energized to release the interlocking mechanism, maintaining user safety during power failures)
- Termination Type: Screw connection via a large wiring compartment
- Cable Entries: 4 x M16 x 1.5 entry ports
- Clamping Force: 2000 N holding force
- Ingress Protection: IP67 rated (dust-tight and protected against water immersion)
- Enclosure Material: Glass-fiber reinforced, self-extinguishing thermoplastic
- Incorrect Locking Protection: Built-in mechanical safety blocking to prevent the switch from locking if the door or actuator is misaligned.
- Manual Release: Features a lateral manual release function used for setup, maintenance, or emergency override situations.
SCHMERSAL AZM 161SK-12 12RK-024 Solenoid Safety Interlock Switch (AZM 161).
-
- Manufacturer: SCHNEIDER ELECTRIC
- Model / Part Number: XS1M18MA250
- Sensor Type: Inductive Proximity (only detects metal).
- Size & Shape: M18 cylindrical threaded barrel (18mm diameter) with a length of 60mm.
- Sensing Distance: 5mm.
- Mounting Type: Flush mountable (can be embedded directly into a metal surface without false triggers).
- Wiring Setup: 2-wire configuration with a built-in 2-meter cable.
- Output Type: 1 NO (Normally Open).
- Supply Voltage: Works across a wide range from 24V to 240V AC or 24V to 210V DC.
- Degree of Protection: IP68 certified, making it highly waterproof and resistant to dust and harsh industrial environments.
- Body Material: Strong nickel-plated brass casing with a PPS plastic sensing face.
-
REQUEST A QUOTE
- Sensor Application: Rotation monitoring
- Sensor Design: Cylindrical M30 × 1.5 threaded body
- Size: 81 mm total length (67 mm threaded length)
- Mounting Type: Flush mountable
- Output Function: 1 NC (Normally Closed)
- Wiring Technique: 2-wire
- Adjustable Frequency Range: 6 to 150 cycles/minute (impulses/min)
- Supply Voltage Limits: 20…264 V AC/DC
- Switching Capacity: 5…350 mA AC or 5…200 mA DC
- Voltage Drop: < 5.7 V when closed
SCHNEIDER XSAV11801 Inductive Proximity Sensor (XSA Series).
-
REQUEST A QUOTE
- Slot Type: C-slot (integrated directly into the component's tracking)
- Number of Switching Points: 2 programmable switching points (allows a single sensor to monitor multiple positions like "open" and "closed")
- Switching Logic / Output: PNP, Closer / Normally Open (NO)
- Nominal Voltage: 24 V DC (Operational range: 12 V to 30 V DC)
- Maximum Switching Current: 100 mA (0.1 A)
- Voltage Drop: 2.2 V
- Typical Switching Time: 0.001 seconds (1 ms)
- Electrical Connection: M8 connector
- Cable Length: 600 mm (60 cm)
- Cable Characteristics: 4 wires, 0.08 mm² wire cross-section, 2.6 mm cable diameter
SCHUNK MMS-P22-S-M8-PNP 0301370 Magnetic Proximity Switch (MMS Series).
-
REQUEST A QUOTE
- Temperature Range: Displays temperatures from -45 to 150°C with a control set range of -45 to 99°C.
- Dual NTC Probes: Utilizes two independent 2-meter sensors—one for monitoring cabinet room temperature and another for defrost control.
- Dimensions: Front panel measures 77 x 35 mm with a mounting hole size of 71 x 29 mm.
- Power & Relays: Typically operates with an external 12V AC sealed transformer and features heavy-duty 30A relay outputs for high electrical loads.
- Build: Designed with a super-thin, water-proof front panel.
- Adjusting Target Temperature: Tap the Set button briefly to view the current target temperature. Use the Up/Down arrows to alter the value, then wait a few seconds for it to automatically save and return to room temperature display.
- Accessing Advanced Parameters: Press and hold the Set button (or combinations dictated by exact sub-models) for several seconds until a parameter code (like E1, C1, etc.) flashes.
- Locking Settings: In normal operation, pressing and holding the Down arrow button for about 10 seconds locks the parameters. The screen will read OFF to indicate they are locked against accidental changes.
- Model: SF-104S-2 Digital Temperature Controller
- Model: SF-104S-2 Digital Temperature Controller. Features of Function. Super-thin,water-proof, with outer high-voltage parts,easy&
SHANGFANG SF-104S Digital Temperature Controller (SF-104).
-
REQUEST A QUOTE
- Operating Voltage: 10 to 30 V DC
- Power Consumption: 1 Watt
- Enclosure Rating: IP 65 (dust and water spray protection when enclosed)
- Connections: 15-pin D-Sub HD socket, 9-pin D-Sub socket, and 4 cable glands
- Cloning Module Support: Built-in slot compatible with the CMC600 parameter cloning module to easily swap sensors without reconfiguring.
SICK CDB420-001 Connection Module (CDB Series).
-
REQUEST A QUOTE
- Housing Design: Cylindrical threaded, M18 x 1 thread size, 91.5 mm length.
- Housing Material: Durable PBT plastic.
- Installation Type: Non-flush mounting.
- Switching Output: PNP.
- Output Function: Complementary (Normally Open [NO] + Normally Closed [NC]).
- Electrical Connection: M12, 4-pin male connector, DC 4-wire configuration.
- Operating Voltage: 10 V DC to 36 V DC.
- Switching Frequency: 30 Hz.
- Enclosure Rating: IP 67 (dust-tight and water immersion resistant).
- Circuit Protection: Short-circuit, reverse polarity, and power-up pulse protection.
SICK CM18-12NPP-KC1 Capacitive Proximity Sensor (CM18).
