Showing 145–160 of 194 results
-
- Manufacturer: LENZE
- Model / Part Number: E82MV552-4B001
- Rated Power: 5.5 kW / 7.5 HP
- Input Electrical Profile: 3-Phase | 400V to 500V AC | 50/60 Hz | 16.8A to 13.4A
- Output Electrical Profile: 3-Phase | 0V to 400V/500V AC | 0 to 650 Hz | 13A to 10.4A
- Control Type: Supports standard V/Hz (Volts per Hertz) control and sensorless vector control for precise torque and speed management.
- Enclosure Rating: IP20 (intended for installation inside a control panel or cabinet).
-
REQUEST A QUOTE
- Compatible Inverter Series: Lenze 8200 Vector
- Digital Outputs: 2 Channels
- Analog Inputs: 2 Channels (Configurable voltage/current)
- Analog Outputs: 2 Channels
- Frequency Output: 1 Channel
- Internal Power Supplies: 20 VDC output (Terminal 20, used for master enable) & 5 VDC output (Terminal 9)
- Enclosure Rating: IP20
- Dimensions / Weight: Approx. 5 × 6.5 × 1.5 cm (2 × 2.5 × 0.6 in) | ~ 0.1 kg (0.22 lbs)
- Common Failure Point: A frequent failure mechanism for aging E82ZAFAC modules is the loss of this internal 20V voltage regulator. If your drive refuses to enable, check the DC voltage on Terminal 20 with a multimeter. If it reads 0V, the module needs repair or replacement.
LENZE E82ZAFAC Communication Module (8200 Series).
-
- Manufacturer: Lenze
- Model / Part Number: E84AVSCE1834VX0
- Rated Output Current: 40 Amps.
- Output Frequency Range: 0 to 599 Hz.
- Enclosure Rating: IP20 (must be housed in a control panel).
- Onboard Inputs/Outputs: 4 digital inputs, 1 digital output, 1 analog input, and 1 analog output.
- Built-in Network Capabilities: CANopen communication is included on the base board. It can expand to support EtherCAT, PROFINET, or PROFIBUS through separate modules.
- Weight: 12 kg (roughly 26.4 lbs).
-
- Manufacturer: Lenze
- Model / Part Number: ESMD552L4TXA
- Power Rating: 5.5 kW (approximately 7.5 Horsepower).
- Input Voltage: 3-Phase 400V AC (standard for heavy industrial power grids).
- Output Frequency: 0 to 500 Hz (allows motors to run at very flexible speeds).
- V/Hz Control Mode: It uses standard Volts-per-Hertz control to provide stable, energy-efficient operation for standard motor tasks.
- Built-in Safety Protections: The drive monitors itself to automatically guard against short circuits, earth faults, overvoltage, motor stalling, and general overloading.
- Clear Display: Features an easy-to-read LED display on the front so operators can monitor settings and check error codes quickly.
- Smooth Ramps: Programmed acceleration and deceleration "S-ramps" stop machines from jerking when they start or stop.
-
REQUEST A QUOTE
- Manufacturer: Lenze
- Product Series: 8200 vector (EVF series)
- Device Type: AC Frequency Converter / Inverter Drive
- Voltage Rating: 380V – 480V AC input range (Standard 3-phase industrial power supply)
LENZE EVF3929-CVV003 Variable Frequency Drive (EVF Series).
-
REQUEST A QUOTE
- Series: 9300 Vector (Frequency Inverter / Servo Drive)
- Power Rating: 0.75 kW / 1 HP
- Input Voltage: 3-Phase 320V to 440V AC (Standard 380V/400V applications)
- Output Frequency: 0 to 599 Hz
- Enclosure Rating: IP20 (Designed for compact, clean environment cabinet mounting)
- Control Method: Sensorless/open-loop vector motor control
- Special Features: Enhanced firmware variant (EVV004) and an integrated Safety Lock mechanism.
LENZE EVF9322-EVV004 Variable Frequency Drive (EVF Series).
-
- Manufacturer: LENZE
- Model / Part Number: EVF9323-EVV100
- Manufacturer: Lenze
- Model / Part Number: EVF9323-EVV100 (9300 Vector Series)
- Device Type: Panel-mounted single-axis frequency inverter
- Rated Power: 1.5 kW (Kilowatts)
- Input Voltage: 3-Phase 400V AC to 480V AC (50/60 Hz)
- Output Current: 3.9 Amps
- Degree of Protection: IP20 (Protected against solid objects up to 12mm, no water protection)
-
REQUEST A QUOTE
- Manufacturer: LENZE
- Model / Part Number: EVF9328-CVV100
- Power Output: 11 kW (15 HP)
- Supply Voltage: 3-phase 380V to 480V AC (commonly optimized for 400V)
- Series Base: 9300 Vector Series
- Control Mechanism: High-dynamic vector control with modular expansion options for I/O and communication modules
- Feedback System: Supports encoder feedback for precise closed-loop positioning accuracy
- Enclosure Rating: Standard cabinet-mounted layout (typically IP20)
LENZE EVF9328-CVV100 Frequency Inverter. Key specifications include Power Output: 11 kW (15 HP); Supply Voltage: 3-phase 380V to 480V AC (commonly optimized for 400V); Series Base: 9300 Vector Series; Control Mechanism: High-dynamic vector control with modular expansion options for I/O and communication modules.
-
REQUEST A QUOTE
- SV (STARVERT): LS Electric Inverter Series.
- Power Output: 0.75 kW / 1 HP
- Input Phase / Voltage: 3-Phase, 380–460 VAC (50/60 Hz)
- Control Method: V/F (Voltage-to-Frequency) Control
- Overload Capacity: 150% of rated current for up to 60 seconds
- Cooling System: Self-cooling design
- Operating Temperature: -10°C to +50°C (Indoor panel mounting)
- Physical Weight: ~1.7 kg (3.7 lbs)
LS SV008IG5-4 Variable Frequency Drive (Starvert iG5).
-
REQUEST A QUOTE
- Maximum Motor Power: 4.0 kW / 5.4 HP
- Input Voltage: 3-Phase 380 ~ 480 V AC
- Output Frequency: 0.1 ~ 400 Hz
- Control Mode: V/f, Sensorless Vector Control
- Input / Output Structure: 8 Digital Inputs, 2 Analog Inputs
- Enclosure Rating: IP20
- SV: STARVERT series (LS Electric VFD product line).
- Width: 140 mm (5.51 in)
- Height: 128 mm (5.04 in)
- Depth: 155 mm (6.10 in)
LS SV040IG5A-4 Variable Frequency Drive (Starvert iG5A).
-
REQUEST A QUOTE
- Circuit Configuration: Series Connected – All SCRs
- Operating Temperature Range: -40°C to +125°C
- Design Benefits: Direct Copper Bonded (DCB) ceramic baseplate for superior thermal efficiency, planar passivated chips for stability, and a robust 7-pin layout.
- Common Uses: Industrial motor controls, soft starters, high-power converters, welding equipment, and industrial furnace heating regulators.
MCC312-16IO1 IXYS SCR Thyristor Module.
-
REQUEST A QUOTE
- Metric: Specification
- DC Output Voltage: 48V DC
- Rated Current: 7.3A
- Current Range: 0 ~ 7.3A
- Rated Power: 350.4W
- Input Voltage Range: 115VAC or 230VAC (Selected by manual slide switch)
- Switching Frequency: 25 KHz
- Cooling: Forced air cooling via built-in DC fan (with automatic ON/OFF control)
- Dimensions: 215mm x 115mm x 50mm (L x W x H)
- Overload: Constant current limiting, which automatically recovers after the fault condition is removed.
MEAN WELL S-350-48 Switching Power Supply (S-350).
-
REQUEST A QUOTE
- IGBT Technology Type: Trench Gate
- Package / Mounting: Screw-mount, structurally isolated copper baseplate
- Industrial Motor Drives: Used for speed and torque regulation in AC servo controls and heavy industrial machinery.
- Uninterruptible Power Supplies (UPS): Serves in the inverter or rectifier conversion stages.
- General Purpose Inverters: Implemented in renewable energy power networks (e.g., solar inverters, wind turbines).
- High-Power DC-DC Converters: Integrated into large-scale battery storage and battery-powered supply networks.
- Status: This module is officially classified as Obsolete / End-of-Life (EOL) by the manufacturers.
- Datasheets: View and download the official multi-page documents on the Alldatasheet Portal or check structural definitions via the Ineltron Data Repository.
MITSUBISHI CM200DU-24F IGBT Module (CM200).
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Integrated Protection: Freewheeling Diodes
- Motor Drives: Used to orchestrate AC and DC motor control, as well as servo amplifiers.
- Power Converters: Frequently integrated into large industrial inverters, Uninterruptible Power Supplies (UPS), and induction heating rigs.
- Renewable Energy: Acts as a stage-power switching element for commercial solar inverters and wind turbine networks.
- DIY & High Voltage Projects: Highly favored in the hobbyist community for constructing heavy-duty Dual Resonant Solid State Tesla Coils (DRSSTC), notably running off a doubled 120VAC line to achieve electric arc discharges spanning over 6 feet (1.83 meters).
- Datasheet Review: The official structural schematic and thermal curves can be cross-examined via the ALLDATASHEET CM300DY-12NF PDF.
MITSUBISHI CM300DY-12NF IGBT Module (CM300).
-
REQUEST A QUOTE
- Collector-Emitter Saturation: 3.2 V
- Package / Mounting: 7 Terminals, Chassis Mount
- Industrial Power Systems: Uninterruptible Power Supplies (UPS inverter/rectifier stages), AC motor speed controls, motion/servo controls, and heavy-duty welding power supplies.
- High-Voltage DIY & Tesla Coils: This module is widely considered a gold standard among hobbyists for building medium-to-high power DRSSTC (Dual Resonant Solid State Tesla Coils). Two modules paired in a full-bridge configuration can manage an output swing of nearly 1400V, producing electrical arcs exceeding 12 feet.
- Discontinued Status: The CM300DY-24H has been officially discontinued by Mitsubishi Electric.
MITSUBISHI CM300DY-24H IGBT Module (CM300).
-
REQUEST A QUOTE
- Configuration: Dual / Half-Bridge (2 elements)
- Technology Generation: IGBT 5 (Trench Gate)
- Mounting / Terminals: Panel (Screw) / 7-Pin Tab
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heat-sinking baseplate. This provides simplified thermal management, letting you mount multiple modules to a single common heatsink without external electrical isolation.
- Discrete Free-Wheel Diode: Features integrated, super-fast recovery reverse diodes designed to handle high freewheeling currents and protect the IGBT structure from inductive voltage spikes.
- AC Motor Control: Variable frequency drives (VFDs) and high-power industrial AC drive inverters.
- Servo Controls: Precision motion control systems requiring heavy current handling.
- Uninterruptible Power Supplies (UPS): High-reliability backup power systems.
- Power Management: Battery-powered industrial supplies, solar inverters, and large DC-to-DC converters.
MITSUBISHI CM400DY-24A IGBT Module (CM400).
