Showing 161–176 of 194 results
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Primary Uses: Optimized for general-purpose industrial inverters, AC motor drives, and high-precision servo controls.
- Integrated Diodes: Contains two IGBT transistors connected in a half-bridge layout, each supported by an ultra-fast recovery reverse freewheeling diode.
- Package Footprint: Chassis mount module configuration utilizing a standard multi-terminal layout with M6 nuts for structural power termination.
MITSUBISHI CM400DY-24NF IGBT Module (CM400).
-
REQUEST A QUOTE
- Configuration: Single IGBT with discrete Free-Wheel Diode
- Weight: 270 g / ~0.6 lbs
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heatsink baseplate
- Integrated Free-Wheel Diode: Features a dedicated, super-fast recovery diode connected anti-parallel to handle inductive load current
MITSUBISHI CM450HA-5F IGBT Module (CM450).
-
REQUEST A QUOTE
- Configuration: 1-Element (Single) Packaged as a single switch per module
- Mounting Type: Chassis Mount Heavy-duty bolt-down installation
- Uninterruptible Power Supplies (UPS): Frequently integrated to scale up energy capacity and reinforce industrial backup systems.
- DC Choppers & Converters: Managing voltage transitions in large industrial power feeds.
- Welding Equipment & Power Supplies: Regulating high-current demands safely.
- Datasheets: You can view complete pin configurations and timing diagrams on the Alldatasheet Technical Archive.
MITSUBISHI CM600HU-24F Single-Element IGBT Module (F-Series).
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-A8NS
- High-Speed Motion Integration: Connects the FR-A800 drive as an extension of a motion controller system, allowing highly synchronized speed and position pulse configurations.
- Position Control Support: Features like position droop pulse clearing (CLRN) can be processed through the network via the host system depending on parameter programming.
- Reduced Wiring: Replaces complex traditional analog/digital control wiring with a single fiber-optic SSCNET cable, minimizing electrical noise interference.
-
REQUEST A QUOTE
- Model / Series: FR-CS82S-025-60 (FREQROL-CS80 Series)
- Input Power Source: Single-Phase 200 to 240 V AC (± 10%), 50/60Hz
- Rated Motor Capacity: 0.4 kW (approx. 0.5 Horsepower)
- Rated Output Current: 2.5 A
- Output Frequency Range: 0.2 to 400 Hz
- Control System: Soft-PWM, General-purpose magnetic flux vector control, or V/F control
- Enclosure Rating: IP20 (Open Type)
- Circuit Board Coating: Type "60" (Indicates conformal coating for improved environmental resistance)
- FR: FREQROL Inverter Series
- Kempston Controls US: Available as a standard stock item for domestic industrial fulfillment.
MITSUBISHI FR-CS82S-025-60 Variable Frequency Drive (FREQROL-CS80).
-
REQUEST A QUOTE
- Model Number: FR-D720S-0.75K-CHT
- Applicable Motor Capacity: 0.75 kW (1.0 HP)
- Input Power: 1-Phase 200–240V AC (±10%)
- Output Voltage: 3-Phase 200–240V AC
- Rated Output Current: 4.2 Amperes
- Output Frequency Range: 0.2 to 400 Hz
- Control System: V/F Control
- Communication Protocol: RS-485 (Modbus-RTU)
- Enclosure Rating: IP20
- Safety Integration: STO (Safe Torque Off)
MITSUBISHI FR-D720S-0.75K-CHT Variable Frequency Drive (FREQROL-D700).
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-E740-5.5K-CHT
- Input Power: Three-phase AC, 380V to 480V at 50/60Hz.
- Output Power: Three-phase AC corresponding to input voltage, with a rated capacity of 9.1 kVA.
- Smart Motor Control: Uses advanced magnetic flux vector control.
- Built-in Dial: Includes a physical control wheel on the front panel. You can use this to quickly change motor speeds or modify settings right on the machine.
- Expandable: Features a built-in USB port for computer setup and a slot to insert option cards for specialized industrial networks (like CC-Link).
-
REQUEST A QUOTE
- Series: FREQROL-E800
- Voltage Class: 200V Class (Three-Phase)
- Rated Capacity: 18.5 kW (~25 Horsepower)
- Ethernet: Standard / Base Model
- Monitor Output: FM Type Terminal
- Enclosure Rating: IP20
- Material Handling: Conveyors, sorting lines, and overhead cranes.
- HVAC Systems: High-capacity industrial fans, blowers, and commercial water pumps.
- Packaging & Textiles: Winders, tension-control machinery, and high-speed packaging lines.
- Food Processing: Industrial mixers, grinders, and automated bottling lines.
MITSUBISHI FR-E820-18.5K-1 Variable Frequency Drive (FREQROL-E800).
-
- Manufacturer: Mitsubishi
- Model / Part Number: FR-S520SE-0.75k-KC
- Series: FR-S500 (Specifically S520E sub-series) Compact, transistorized micro-inverter
- Motor Capacity: 0.75 kW (Equivalent to 1 Horsepower / 1 HP) Maximum applicable motor capacity
- Input Power Supply: Single-Phase 200V to 240V AC 50/60Hz frequency tolerance
- Output Power: Three-Phase 200V to 240V AC Converts single-phase input to three-phase output
- Control Platform: RS-485 Serial Communication Integrated digital dial setting and display
- Input Power Terminals: Marked as L1 and N for the single-phase power line connections.
- Output Terminals: Marked as U, V, and W to connect directly to the three-phase motor.
- Ground: Dedicated PE (Earth) terminal to prevent electrical shock.
- Control Interface: Features a built-in RS-485 port for connecting parameter units like the FR-PU04 or network systems.
- Integrated Protection: Built-in electronic thermal overcurrent protection safeguards your motor from overheating.
- Constant-Torque Tuning: Can be configured via parameter settings (Pr. 71 and Pr. 9) to provide 100% continuous torque even at low operational speeds.
- User-Friendly Interface: Uses a digital setting dial making parameter setup and adjustments incredibly quick.
-
REQUEST A QUOTE
- Feature / Attribute: Normal Duty Specifications
- Rated Motor Power: 3.0 kW / 5.0 HP
- Continuous Output Current: 6.9 A (at 2 kHz to 12 kHz switching)
- Input Voltage Range: 3-Phase, 380 VAC to 480 VAC (±10%)
- Input Frequency: 50 / 60 Hz
- Frame Size: Size 1
- Control Modes: Open Loop Vector, Closed Loop, RFC, V/Hz, Servo, Regenerative
- Enclosure Rating: IP20
- Universal Feedback Interface: Equipped with a high-resolution universal encoder port that natively supports up to 14 different feedback types (including incremental, SinCos, SSI, and EnDat encoders).
NIDEC SP1404 Variable Frequency Drive (Unidrive SP).
-
REQUEST A QUOTE
- Function & Type: Independent Electromagnetic Clutch Unit
- Maximum Operating Rotational Speed: 3,600 RPM
- Operating Condition: Dry environment only
- Motive Energy: General purpose / standard application environments
- Packaged Design: Pre-engineered assembly minimizes installation alignment errors and simplifies mounting.
- Fast Response Time: Built specifically for quick engagement and disengagement cycles.
- Precision Control: Typically utilized in standard packaging machinery, office equipment, paper feeding mechanisms, and small conveyor lines where compact torque control is necessary.
OGURA AMP 10 Electromagnetic Clutch Pack (AMP Series).
-
REQUEST A QUOTE
- Series: MX2 Series (V1 Type)
- Input Voltage: 3-phase 380 to 480 VAC
- Output Voltage: 3-phase 380 to 480 VAC (Output cannot exceed incoming voltage)
- Load Wattage: 4.0 kW (5 HP)
- Rated Input Current: 11.0 A (CT) / 13.3 A (VT)
- Dimensions: 140 mm Width × 128 mm Height × 170.5 mm Depth
- Operating Temperature: -10°C to 50°C
- Mounting Type: Chassis Mount
- Control Modes: Current vector control and sensorless vector control.
- High Torque: Provides up to 200% starting torque at 0.5 Hz.
OMRON 3G3MX2-A4040-V1 Variable Frequency Drive (3G3MX2).
-
REQUEST A QUOTE
- Voltage Class: 3-Phase 400 V AC (400V Class)
- Max Applicable Motor Capacity: 11 kW (Constant Torque rating)
- Enclosure Rating: Panel-mounting (IP10 minimum) or closed wall-mounting
- Control Methods: Current vector control, open-loop V/f control, and open-loop vector control
- High Starting Torque: Delivers reliable power control and strong torque even at low speeds, which is highly beneficial for heavy-duty startup loads.
- Advanced Automation Logic: Built with advanced algorithms to seamlessly handle engine control, simple positioning tasks, pulse inputs, and specialized operating profiles like a safety-driven "fire mode" for building automation environments.
OMRON 3G3MX2-A4110-ZV1 Variable Frequency Drive (3G3MX2).
-
- Manufacturer: ORIENTAL MOTOR
- Model / Part Number: BMUD30-C2
- Rated Output: 30 W (1/25 HP)
- Input Voltage: Single-phase or three-phase 200–240 VAC
- Operator Interface: Display, setting dial, run/standby switch and direction switch
- Preset Speeds: Up to 4
-
REQUEST A QUOTE
- Function: Special control elevator door inverter.
- Power Rating: 200V / 0.4KW.
- Origin: Manufactured in China.
- Interchangeability: Commonly acts as a direct interchangeable replacement model for older or failed AAD03011D and AAD03010 units.
- Smooth Motion Control: Regulates acceleration and deceleration for gentle, synchronized door movements and soft stops.
- Safety Integration: Features built-in parameters for immediate obstacle detection response (reversing doors if a passenger or object blocks them).
- Maintenance & Retrofitting: Widely used by maintenance depots as a universally compatible spare for multi-brand elevator systems utilizing Panasonic-sourced hardware, especially in low- to mid-rise buildings (≤10 floors).
- Online Parts Specialists: Available through specialized retailers like Echo Elevador Partes, which lists it as an original brand-new item.
PANASONIC AAD03011DK Elevator Door Inverter (Panasonic).
-
REQUEST A QUOTE
- Motor Capacity: 0.75 kW / 1 HP
- Input Voltage: Single-phase 200V to 230V AC (+10%, -15% variance allowed) at 50/60Hz
- Rated Output Current: 4.2 A
- Output Frequency Range: 0.5Hz to 400Hz
- Control Methods: Sine wave PWM control, V/f control, and simple sensorless vector control
- Communication: RS485 Modbus RTU interface
- Overload Capacity: 150% of rated current for 1 minute
- Built-in Hardware: Features a built-in braking transistor and a digital operation panel capable of parameter uploading/downloading (CPY1 function).
- Inosaki: Stocking new condition compact inverters.
PANASONIC AVF200-0072 Variable Frequency Drive (VF200).
