Showing 97–112 of 129 results
-
REQUEST A QUOTE
- Metric: Specification
- DC Output Voltage: 48V DC
- Rated Current: 7.3A
- Current Range: 0 ~ 7.3A
- Rated Power: 350.4W
- Input Voltage Range: 115VAC or 230VAC (Selected by manual slide switch)
- Switching Frequency: 25 KHz
- Cooling: Forced air cooling via built-in DC fan (with automatic ON/OFF control)
- Dimensions: 215mm x 115mm x 50mm (L x W x H)
- Overload: Constant current limiting, which automatically recovers after the fault condition is removed.
Brand New MEAN WELL S-350-48 Stepper Drive. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- IGBT Technology Type: Trench Gate
- Package / Mounting: Screw-mount, structurally isolated copper baseplate
- Industrial Motor Drives: Used for speed and torque regulation in AC servo controls and heavy industrial machinery.
- Uninterruptible Power Supplies (UPS): Serves in the inverter or rectifier conversion stages.
- General Purpose Inverters: Implemented in renewable energy power networks (e.g., solar inverters, wind turbines).
- High-Power DC-DC Converters: Integrated into large-scale battery storage and battery-powered supply networks.
- Status: This module is officially classified as Obsolete / End-of-Life (EOL) by the manufacturers.
- Datasheets: View and download the official multi-page documents on the Alldatasheet Portal or check structural definitions via the Ineltron Data Repository.
Brand New MITSUBISHI CM200DU-24F IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Integrated Protection: Freewheeling Diodes
- Motor Drives: Used to orchestrate AC and DC motor control, as well as servo amplifiers.
- Power Converters: Frequently integrated into large industrial inverters, Uninterruptible Power Supplies (UPS), and induction heating rigs.
- Renewable Energy: Acts as a stage-power switching element for commercial solar inverters and wind turbine networks.
- DIY & High Voltage Projects: Highly favored in the hobbyist community for constructing heavy-duty Dual Resonant Solid State Tesla Coils (DRSSTC), notably running off a doubled 120VAC line to achieve electric arc discharges spanning over 6 feet (1.83 meters).
- Datasheet Review: The official structural schematic and thermal curves can be cross-examined via the ALLDATASHEET CM300DY-12NF PDF.
Brand New MITSUBISHI CM300DY-12NF IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Collector-Emitter Saturation: 3.2 V
- Package / Mounting: 7 Terminals, Chassis Mount
- Industrial Power Systems: Uninterruptible Power Supplies (UPS inverter/rectifier stages), AC motor speed controls, motion/servo controls, and heavy-duty welding power supplies.
- High-Voltage DIY & Tesla Coils: This module is widely considered a gold standard among hobbyists for building medium-to-high power DRSSTC (Dual Resonant Solid State Tesla Coils). Two modules paired in a full-bridge configuration can manage an output swing of nearly 1400V, producing electrical arcs exceeding 12 feet.
- Discontinued Status: The CM300DY-24H has been officially discontinued by Mitsubishi Electric.
Brand New MITSUBISHI CM300DY-24H IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Configuration: Dual / Half-Bridge (2 elements)
- Technology Generation: IGBT 5 (Trench Gate)
- Mounting / Terminals: Panel (Screw) / 7-Pin Tab
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heat-sinking baseplate. This provides simplified thermal management, letting you mount multiple modules to a single common heatsink without external electrical isolation.
- Discrete Free-Wheel Diode: Features integrated, super-fast recovery reverse diodes designed to handle high freewheeling currents and protect the IGBT structure from inductive voltage spikes.
- AC Motor Control: Variable frequency drives (VFDs) and high-power industrial AC drive inverters.
- Servo Controls: Precision motion control systems requiring heavy current handling.
- Uninterruptible Power Supplies (UPS): High-reliability backup power systems.
- Power Management: Battery-powered industrial supplies, solar inverters, and large DC-to-DC converters.
Brand New MITSUBISHI CM400DY-24A IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Configuration: Dual (Half-Bridge)
- Primary Uses: Optimized for general-purpose industrial inverters, AC motor drives, and high-precision servo controls.
- Integrated Diodes: Contains two IGBT transistors connected in a half-bridge layout, each supported by an ultra-fast recovery reverse freewheeling diode.
- Package Footprint: Chassis mount module configuration utilizing a standard multi-terminal layout with M6 nuts for structural power termination.
Brand New MITSUBISHI CM400DY-24NF IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Configuration: Single IGBT with discrete Free-Wheel Diode
- Weight: 270 g / ~0.6 lbs
- Isolated Baseplate: All internal components and electrical interconnects are fully isolated from the copper heatsink baseplate
- Integrated Free-Wheel Diode: Features a dedicated, super-fast recovery diode connected anti-parallel to handle inductive load current
Brand New MITSUBISHI CM450HA-5F IGBT Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Configuration: 1-Element (Single) Packaged as a single switch per module
- Mounting Type: Chassis Mount Heavy-duty bolt-down installation
- Uninterruptible Power Supplies (UPS): Frequently integrated to scale up energy capacity and reinforce industrial backup systems.
- DC Choppers & Converters: Managing voltage transitions in large industrial power feeds.
- Welding Equipment & Power Supplies: Regulating high-current demands safely.
- Datasheets: You can view complete pin configurations and timing diagrams on the Alldatasheet Technical Archive.
Brand New MITSUBISHI CM600HU-24F Single-Element IGBT Module (F-Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model / Series: FR-CS82S-025-60 (FREQROL-CS80 Series)
- Input Power Source: Single-Phase 200 to 240 V AC (± 10%), 50/60Hz
- Rated Motor Capacity: 0.4 kW (approx. 0.5 Horsepower)
- Rated Output Current: 2.5 A
- Output Frequency Range: 0.2 to 400 Hz
- Control System: Soft-PWM, General-purpose magnetic flux vector control, or V/F control
- Enclosure Rating: IP20 (Open Type)
- Circuit Board Coating: Type "60" (Indicates conformal coating for improved environmental resistance)
- FR: FREQROL Inverter Series
- Kempston Controls US: Available as a standard stock item for domestic industrial fulfillment.
Brand New MITSUBISHI FR-CS82S-025-60 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model Number: FR-D720S-0.75K-CHT
- Applicable Motor Capacity: 0.75 kW (1.0 HP)
- Input Power: 1-Phase 200–240V AC (±10%)
- Output Voltage: 3-Phase 200–240V AC
- Rated Output Current: 4.2 Amperes
- Output Frequency Range: 0.2 to 400 Hz
- Control System: V/F Control
- Communication Protocol: RS-485 (Modbus-RTU)
- Enclosure Rating: IP20
- Safety Integration: STO (Safe Torque Off)
Brand New MITSUBISHI FR-D720S-0.75K-CHT Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: FREQROL-E800
- Voltage Class: 200V Class (Three-Phase)
- Rated Capacity: 18.5 kW (~25 Horsepower)
- Ethernet: Standard / Base Model
- Monitor Output: FM Type Terminal
- Enclosure Rating: IP20
- Material Handling: Conveyors, sorting lines, and overhead cranes.
- HVAC Systems: High-capacity industrial fans, blowers, and commercial water pumps.
- Packaging & Textiles: Winders, tension-control machinery, and high-speed packaging lines.
- Food Processing: Industrial mixers, grinders, and automated bottling lines.
Brand New MITSUBISHI FR-E820-18.5K-1 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Feature / Attribute: Normal Duty Specifications
- Rated Motor Power: 3.0 kW / 5.0 HP
- Continuous Output Current: 6.9 A (at 2 kHz to 12 kHz switching)
- Input Voltage Range: 3-Phase, 380 VAC to 480 VAC (±10%)
- Input Frequency: 50 / 60 Hz
- Frame Size: Size 1
- Control Modes: Open Loop Vector, Closed Loop, RFC, V/Hz, Servo, Regenerative
- Enclosure Rating: IP20
- Shipping Weight: Approx. 6 kg (13.2 lbs)
- Universal Feedback Interface: Equipped with a high-resolution universal encoder port that natively supports up to 14 different feedback types (including incremental, SinCos, SSI, and EnDat encoders).
Brand New NIDEC SP1404 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Function & Type: Independent Electromagnetic Clutch Unit
- Maximum Operating Rotational Speed: 3,600 RPM
- Operating Condition: Dry environment only
- Motive Energy: General purpose / standard application environments
- Packaged Design: Pre-engineered assembly minimizes installation alignment errors and simplifies mounting.
- Fast Response Time: Built specifically for quick engagement and disengagement cycles.
- Precision Control: Typically utilized in standard packaging machinery, office equipment, paper feeding mechanisms, and small conveyor lines where compact torque control is necessary.
Brand New OGURA AMP 10 Electromagnetic Clutch Pack (AMP Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Series: MX2 Series (V1 Type)
- Input Voltage: 3-phase 380 to 480 VAC
- Output Voltage: 3-phase 380 to 480 VAC (Output cannot exceed incoming voltage)
- Load Wattage: 4.0 kW (5 HP)
- Rated Input Current: 11.0 A (CT) / 13.3 A (VT)
- Dimensions: 140 mm Width × 128 mm Height × 170.5 mm Depth
- Operating Temperature: -10°C to 50°C
- Mounting Type: Chassis Mount
- Control Modes: Current vector control and sensorless vector control.
- High Torque: Provides up to 200% starting torque at 0.5 Hz.
Brand New OMRON 3G3MX2-A4040-V1 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Voltage Class: 3-Phase 400 V AC (400V Class)
- Max Applicable Motor Capacity: 11 kW (Constant Torque rating)
- Enclosure Rating: Panel-mounting (IP10 minimum) or closed wall-mounting
- Control Methods: Current vector control, open-loop V/f control, and open-loop vector control
- Weight: 4.7 Kg (Shipping weight approx. 7 Kg)
- High Starting Torque: Delivers reliable power control and strong torque even at low speeds, which is highly beneficial for heavy-duty startup loads.
- Advanced Automation Logic: Built with advanced algorithms to seamlessly handle engine control, simple positioning tasks, pulse inputs, and specialized operating profiles like a safety-driven "fire mode" for building automation environments.
Brand New OMRON 3G3MX2-A4110-ZV1 Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Function: Special control elevator door inverter.
- Power Rating: 200V / 0.4KW.
- Origin: Manufactured in China.
- Interchangeability: Commonly acts as a direct interchangeable replacement model for older or failed AAD03011D and AAD03010 units.
- Smooth Motion Control: Regulates acceleration and deceleration for gentle, synchronized door movements and soft stops.
- Safety Integration: Features built-in parameters for immediate obstacle detection response (reversing doors if a passenger or object blocks them).
- Maintenance & Retrofitting: Widely used by maintenance depots as a universally compatible spare for multi-brand elevator systems utilizing Panasonic-sourced hardware, especially in low- to mid-rise buildings (≤10 floors).
- Online Parts Specialists: Available through specialized retailers like Echo Elevador Partes, which lists it as an original brand-new item.
Brand New PANASONIC AAD03011DK Inverter. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
