Showing 1537–1552 of 2013 results
-
REQUEST A QUOTE
- Manufacturer: NEC LCD Technologies, Ltd. (NEC Corporation)
- Device Type: DC/AC Backlight Inverter Module
- Nominal Supply Current: 530 mA
- Operating Frequency: 65 kHz
- Output Capability: Supports 2-Lamp CCFL configurations
- Environmental Standards: RoHS Compliant, Lead-Free design
- Form Factor / Package: Compact integrated PCB module
- Cross-Compatibility: Drops in as an alternate model/upgrade for 104PW161, CXA-0308, and CXA-0543 (features enhanced operating temperature tolerance)
- High or Open: Backlight turns ON.
- Low: Backlight turns OFF.
NEC 104PW191 DC/AC Inverter Board (104 Series).
-
REQUEST A QUOTE
- Input Supply Voltage: 12.0 V DC (Nominal)
- Nominal Supply Current: 0.53 A (530 mA)
- Output Voltage: 520 V AC
- Output Current: 5.0 mA (0.005 A)
- Operating Frequency: 67.5 kHz
- Interface Connector: 12-pin module alignment
- Compliance: RoHS compliant, Lead-Free
- Recommended Action: When servicing a system utilizing the 104PW201, verify lamp integrity or proactively replace the dual CCFL lamps alongside the inverter.
- Benefits: Extends display lifespan to over 100,000 hours, lowers power draw, removes high-voltage points, and requires no soldering to adapt the original 12-pin wire harness.
NEC 104PW201 CCFL Backlight Inverter (104 Series).
-
- Manufacturer: NEC
- Model / Part Number: 121PW181
- Output Current: Designed for a 5mA electrical current.
- Compatibility: Frequently paired with specific industrial LCD models such as the NL8060BC31-42D, NL10276BC24-13, and NL8060BC31-27 series.
-
REQUEST A QUOTE
- Screen Size: 15.3 inches
- Resolution: 1280 × 768 pixels (WXGA format)
- Aspect Ratio: 15:9
- Brightness: 470 cd/m² (NITS)
- Contrast Ratio: 700:1
- Display Mode: SA-SFT, Normally Black, Transmissive
- Viewing Angle: Ultra-wide 88°/88°/88°/88° (Left/Right/Up/Down)
- Color Depth: Supports 262K or 16.7M colors (6-bit / 6-bit + Hi-FRC)
- Surface Treatment: Antiglare with a 3H hard coating
- Operating Temperature: Wide operational window of -10°C to +70°C
- Lamp Type: Edge-lit LED string system (4 strings total)
- Lamp Life: Rated for an extensive 70,000 hours of continuous use
- Input Voltage: Typical 28.4V (ranges from 25.7V minimum to 31.5V maximum)
- Interface Configuration: Utilizes a 10-pin connector system (SM10B-SHLS-TF)
NEC NL12876BC26-32D Industrial-Grade TFT-LCD Display Panel (NL12876 Series).
-
REQUEST A QUOTE
- Panel Size / Type: 10.4 inches (26.4 cm) diagonal / a-Si TFT-LCD, LCM
- Resolution / Aspect Ratio: 640 × 480 (VGA) / 4:3
- Surface Treatment: Clear or Antiglare, Hard coating (3H)
- Brightness (Typical): 450 cd/m² (Nits)
- Contrast Ratio: 600:1 (Typical)
- Display Colors: 262K (43% NTSC coverage)
- Signal Interface: CMOS (1 ch, 6-bit), 31 pins connector
- Input Voltage: 3.3V / 5.0V (Typical)
- Operating Temperature: -10°C to 70°C (14°F to 158°F)
- Storage Temperature: -20°C to 80°C (-4°F to 176°F)
NEC NL6448BC33-59D TFT-LCD Module (NL Series).
-
REQUEST A QUOTE
- Model Series: HES (Hollow Shaft Series)
- Resolution: 2500 P/R (Pulses Per Revolution)
- Output Phase/Signals: 2M: A, B (90° phase difference) + Zero Signal (Z)
- Output Circuit Type: D: Line Driver Output (with complementary inverted signals Ā, B̄, Z̄)
- Supply Voltage: DC 4.75V – 5.25V (5V DC nominal)
- Current Consumption: 150 mA Maximum
- Max Response Frequency: 200 kHz
- Shaft Dimensions: 8mm (0.31 inches) blind hollow shaft
- Outer Diameter: 38mm (1.50 inches)
- Max Mechanical Speed: 6000 r/min (RPM)
NEMICON HES-25-2MD 2500P R Rotary Encoder (HES Series).
-
REQUEST A QUOTE
- Technical Attribute: Specification
- Encoder Type: Incremental Rotary Encoder
- Resolution: 500 pulses per revolution (PPR)
- Shaft Type / Diameter: Solid Shaft / φ 8 mm
- Dimensions: φ 50 mm (Diameter) × 34 mm (Length)
- Output Phase: A / B two-phase + Z (index) phase
- Output Type: Push-Pull output (with partial load short-circuit protection)
- Supply Voltage Range: DC 4.75V to 30V
- Max Response Frequency: 100 kHz
- Max Mechanical Speed: 5000 RPM
NEMICON NOC2-S500-2HC Rotary Encoder (NOC2).
-
REQUEST A QUOTE
- Specification Parameter: Details & Values
- Channels: 1 input / 1 output
- Power Supply: 18 ~ 60 V DC
- Input Signal: 4 ~ 20mA, HART
- Input Line Resistance: Approx. 75Ω
- Available Voltage: Open-circuit voltage ≤ 26V; ≥ 16V at 20mA
- Output Signal: 4 ~ 20mA, HART
- Load Resistance: RL ≤ 550 Ω
- Transfer Accuracy: 0.1 % F.S.
- Temperature Drift: 30 ppm/°C
- Response Time: ≤ 2 ms
- Power Dissipation: 1.3 W
- Safety Integrity Level: Certified SIL3.
- Safe State Indicator: The output signal drops below 3.6mA or exceeds 21.5mA to flag faults.
- Galvanic Isolation: Full galvanic isolation between input, output, and power supply channels.
- Insulation Resistance: ≥ 100 MΩ (Input / Output / Power supply).
- Product Approvals: NEPSI, SIL, CE, FCC, CCS, CCC.
- Operating Temperature: -20 °C to +60 °C
- Storage Temperature: -40 °C to +80 °C
- Mounting Location: Must be mounted in a safe area and connected to intrinsically safe apparatus in hazardous areas (Zone 0, Zone 1, Zone 2, ⅡA, ⅡB, ⅡC, T4 ~ T6).
- Connection Method: Screw connection.
- Mounting Type: DIN 35 mm rail.
- Dimensions: 12.8mm (W) × 110mm (H) × 117mm (D).
NewPwR NPEXA-CM31 Analog Input Safety Barrier (NPEXA Series).
-
REQUEST A QUOTE
- Connectors: One 68-pin male SCSI connector for direct ribbon/shielded cable assembly, alongside 68 screw terminals for custom wire routing.
- Orientation: It features a vertical-mounted connector. (Note: If you need a right-angle layout instead, look for the NI CB-68LPR variant).
- Form Factor: Includes physical standoff feet. It is suitable for flat desktop use or for mounting directly into a custom panel layout.
- Dimensions: 5.65 x 4.23 x 1.18 inches (14.35 x 10.74 cm).
- Voltage & Mapping: The block passes signals through on a 1-to-1 pin mapping to your DAQ board. It acts as a passive connector and does not change the voltage limitations of your specific hardware system.
NI CB-68LP 68-Pin Connector Block (CB Series).
-
REQUEST A QUOTE
- Analog Input (AI): 8 Single-Ended / 4 Differential
- AI Resolution: 16-bit
- AI Max Sample Rate: 50 kS/s
- Input Voltage Range: ± 10 V
- Analog Output (AO): 2 Channels
- Digital I/O (DIO): 13 Bidirectional Lines
- Counter/Timer: 1 Channel (32-bit)
- Connectivity: Screw-Terminal Blocks
- Bus Interface: USB 2.0
- FIFO Buffer Size: 2,047 samples
NI USB-6002 Multifunction I/O Device (USB-6002).
-
REQUEST A QUOTE
- Manufacturer: Nidec Corporation
- Model / Series: B35502-35DEL7 (BETAV TA450DC)
- Dimensions: 120 mm x 120 mm x 38 mm (12038 standard)
- Rated Voltage: 12V DC
- Current Draw: 1.40A (Note: Some variants label 1.54A)
- Power Consumption: 16.8 Watts
- Fan Speed: 4,000 to 4,200 RPM
- Maximum Airflow: 160 CFM
- Static Pressure: 0.883 in H₂O
- Acoustic Noise: 56.5 dBA
- Bearing Type: Dual Precision Ball Bearings
- Housing Material: PBT Plastic (UL94V-0 flammable rating)
- Black Wire: Ground (GND) (-)
- Red Wire: Power (12V) (+)
- Yellow or White Wire: Tachometer / RPM Signal (Sensor)
- Blue Wire: PWM Speed Control Input
- Dell Part Numbers: D8794, 0D8794, PP749-A00
- Common Applications: Dell Precision 390, T7500 workstations, and 12cm high-density server chassis.
NIDEC B35502-35DEL7 Axial Server Cooling Fan (TA450DC Series).
-
REQUEST A QUOTE
- Manufacturer: Nidec Servo Corporation (Japan)
- Model Number: D1751S24B6CZ-16 (also referenced as D1751S24B6CZ16)
- Fan Type: Industrial DC Axial Flow Fan
- Dimensions: 172 mm × 172 mm × 51 mm (Standard 17251 frame)
- Frame Material: Full round aluminum frame with plastic impeller blades
- Rated Voltage: 24 VDC
- Rated Current: 1.8 A
- Power Consumption: 43.2 W
- Maximum Fan Speed: 6,950 RPM ± 10%
- Maximum Airflow: 16.5 m³/min (≈ 582 CFM)
NIDEC D1751S24B6CZ-16 DC Axial Fan (Nidec Servo).
-
REQUEST A QUOTE
- Feature / Attribute: Normal Duty Specifications
- Rated Motor Power: 3.0 kW / 5.0 HP
- Continuous Output Current: 6.9 A (at 2 kHz to 12 kHz switching)
- Input Voltage Range: 3-Phase, 380 VAC to 480 VAC (±10%)
- Input Frequency: 50 / 60 Hz
- Frame Size: Size 1
- Control Modes: Open Loop Vector, Closed Loop, RFC, V/Hz, Servo, Regenerative
- Enclosure Rating: IP20
- Universal Feedback Interface: Equipped with a high-resolution universal encoder port that natively supports up to 14 different feedback types (including incremental, SinCos, SSI, and EnDat encoders).
NIDEC SP1404 Variable Frequency Drive (Unidrive SP).
-
REQUEST A QUOTE
- Feature / Attribute: Specification Profile
- Panel Size & Type: 15.0 inches diagonal / a-Si TFT-LCD
- Native Resolution: 1024 × 768 pixels (XGA format, 4:3 aspect ratio)
- Pixel Arrangement: RGB Vertical Stripe
- Active Display Area: 304.128 (W) × 228.096 (H) mm
- Outline Dimensions: 326.5 (W) × 253.5 (H) × 14.6 (D) mm (Variant dependent)
- Luminance (Brightness): 400 cd/m² (Typical)
- Contrast Ratio: 600:1 (Typical, Transmissive mode)
- Display Colors: 262K (6-bit) or 16.7M (6-bit + Hi-FRC)
- Viewing Angles: 80° / 80° / 80° / 80° (Left/Right/Up/Down, Typical @ CR ≥ 10)
NLT NLB150XG01L-01 TFT-LCD Module (NLB Series).
-
REQUEST A QUOTE
- Dimensions: 172 mm × 150 mm × 38 mm
- Rated Voltage: 220V AC (Single Phase, 50/60 Hz)
- Input Power: 40W to 42W
- Airflow Capacity: Up to 212–225 CFM
- Rotational Speed: ~2,700 to 3,200 RPM
- Noise Level: 53 to 56 dBA (Note: General consumer descriptions may list lower levels, but industrial datasheets specify typical noise levels around 53–56 dB due to high airflow)
- Termination: 2-wire connection
- Bearing Type: Dual Ball Bearing
NMB 5915PC-22W-B30-SM1 AC Axial Cooling Fan (5915 Series).
-
REQUEST A QUOTE
- Part Number: 19141010
- Rectification: Half-wave
- Input Voltage: 200–480 V AC (−10% / +10%)
- Input Frequency: 50/60 Hz
- Output Voltage: 90–215 V DC
- Current Rating: 1.0 A
The NORD GHE40L, part number 19141010, is a half-wave rectifier for electromechanical motor brakes.
