Showing 2033–2048 of 2058 results
-
REQUEST A QUOTE
- Fan Diameter: 300 mm
- Voltage / Frequency: 220V–230V AC, 50Hz (Single Phase)
- Power Input / Output: Rated specs list an input power between 75W to 85W (often noted under 50W output depending on load conditions)
- Rotational Speed: ~1,380 RPM
- Air Flow Capacity: Up to 1,740 – 1,850 m³/h
- Noise Level: Low operation volume at approximately 60 dBA
- Capacitor: Requires a 3µF capacitor (typically included)
- Protection Rating: IP54 moisture and dust certification
WEIGUANG YWF4E-300S 220V 50W External Rotor Axial Fan Motor (YWF4E Series).
-
- Manufacturer: Weintek
- Model / Part Number: CMT-FHDX-920
- Display Output: Full HD 1080p (Up to 1920 x 1080) via HDMI. It supports both 16:9 widescreen and 4:3 traditional monitor layouts.
- Processor: Quad-core Cortex-A17 RISC processor with a dedicated, high-performance 3D graphics engine.
- Memory: 4 GB Flash storage and 1 GB RAM.
- Video Decoding: Supports smooth playback of high-resolution 1080p H.264 industrial video clips.
- Cooling: Completely fan-less design using a rear aluminum sheet heat sink to reject heat quietly and reliably.
- USB: 1 x USB 2.0 Host port for external mice, keyboards, or storage drives.
- Audio: Embedded digital audio output via the HDMI line.
- Mounting: Designed for standard 35mm DIN-rail installation.
- Input Power: 24V DC (±20% tolerance range) with built-in power isolation.
- Operating Temperature: Safe operation between 0°C and 50°C.
-
- Manufacturer: WEINTEK
- Model / Part Number: MT506MV
- Display: A 5.6-inch color display with 320×234 pixel resolution.
- Processor and Memory: It runs on a 32-bit RISC processor (200MHz) and has 2 megabytes of flash memory to hold your machine's custom screens and buttons.
- Communication Ports: It has two serial communication ports.
- Supply Voltage: Runs on standard industrial 24V DC power.
- Front Protection: The front panel is IP65 rated.
- Dimensions and Panel Cutout: The physical box is 204 x 150 mm, but the hole you need to cut out in your panel is 192 x 138 mm.
-
REQUEST A QUOTE
- Display: 7" TFT LCD screen with an 800 x 480 resolution and LED backlight.
- Processor & Memory: Dual-Core RISC ARM CPU with 128 MB RAM and 256 MB onboard flash memory.
- Power Supply: Wide input voltage range of 10.5 to 28 VDC with built-in power isolation.
- Software: Configured using the free EasyBuilder Pro programming software.
Weintek MT8072iP HMI Touch Panel (iP Series).
-
REQUEST A QUOTE
- Display Size: 7 inches
- COM1: RS-232, 4-wire
- COM2: RS-485, 2-wire / 4-wire
- USB Interface: USB Client
WEINVIEW TK6072IP is a 7-inch touchscreen HMI with RS-232, RS-485 and USB Client interfaces.
-
REQUEST A QUOTE
- Power Consumption: 80 Watts
- Voltage Input: 24 V
- Temperature Range: 150°F to 850°F (50°C to 450°C)
- Heating Element: Silver Spool / Silver-Line Technology
- Safety Rating: ESD Safe (prevents electrostatic damage to delicate components)
- Standard Tip Included: LTB Chisel Tip (2.4mm x 0.79mm)
- Cord Length: 4 feet
- Station Series: Compatible Power Unit Models
- WT Series & WR Rework: WT1, WT1H, WR3M, WR2
- WD Series: WD1, WD1M, WD2, WD2M
WELLER WSP80 Soldering Pencil (WSP Series).
-
REQUEST A QUOTE
- Working Range: 0.1 to 10.1 meters
- Measuring Range: 10 meters
- Resolution: 1 to 12 mm
- Linearity: 0.05% (from 0.1 to 5 m) | 0.2% (from 5 to 10.1 m)
- Supply Voltage: 18 to 30 V DC
- Current Consumption: < 100 mA (at 24V Ub)
- Switching Frequency: 50 Hz
- Measuring Rate: 1 to 100 measurements per second
- Analog Output: 0…10 V and 4…20 mA (adjustable)
- Switching Output: PNP NO, Push-pull, NPN
- Interface: RS-232 serial communication
- Housing Material: Plastic (ABS / PC) with PMMA optic cover
- Degree of Protection: IP68 waterproof rating
- OLED Graphical Display: Features an integrated screen and menu buttons for straightforward calibration and configuration directly on the sensor.
- Disengageable Transmitted Light: The laser beam can be deactivated or activated through the menu interface, or via a hardware signal on Pin 5 by bridging it to 24 V.
- Eliminable Temperature Drift: Built-in compensation algorithms safeguard against measurement variation caused by shifting environment temperatures.
- Reliable Detection: Dark, matte, or uneven surfaces can be accurately identified due to the Time-of-Flight technology.
Wenglor Y1TA100MHT88 Laser Distance Sensor (Y1TA Series).
-
- Brand: Xinje
- Model: OP320-A-S
- Series: OP320
- Display: 3.7-inch STN LCD
- Resolution: 192 × 64 pixels
- Keys: 20 physical keys
- Power supply: 24 V DC; 20–28 V DC operating range
- Power consumption: Less than 4 W; 2 W typical
- Communication: RS-232 and RS-485
- Flash memory: 64 KB
- SRAM: 1 KB
- Overall dimensions: 172 × 94 × 30 mm
- Operating temperature: 0 to +50 °C
- Front protection: IP65
-
REQUEST A QUOTE
- Display: 4.3-inch TFT LCD, 16 million true colors, 480×272 resolution with LED backlighting.
- Performance: ARM9 400MHz CPU paired with 128MB Internal Memory.
- Power Requirements: DC24V input voltage (operational range: DC22V to DC26V) with a current consumption of 140mA.
- Durability: IP65-rated front panel protective design with a backlighting lifespan of roughly 50,000 hours.
- Internal Features: Built-in Real-Time Clock (RTC), data logging capabilities, and multi-PLC communication profiles.
- Main Features: * ARM9 400MHz CPU, Memory 128MB. * 4.3 inch LCD, 16 million colors TFT LCD, LED backlight, resolution 480*272. * 1 …
Xinje TG465-MT 4.3-Inch HMI Touch Screen (TouchWin TG Series).
-
REQUEST A QUOTE
- Display Size: 7.0 inches (Diagonal)
- Resolution: 800 x 480 pixels (TFT LCD with LED backlight)
- Processor: ARM Cortex-A7 dual-core (1GHz clock speed)
- Memory: 128MB RAM
- Touch Panel: 4-wire resistive touch interface
- Operating System: Linux
- Configuration Software: TouchWin Pro Editing Tool
- Input Power: DC 24V (Operating range: 22V–26V)
- Robust Protection: The front panel is rated IP65, protecting it against dust, liquid ingress, and airborne debris common in factory environments.
- Connectivity Profile: Typically equipped with critical communication interfaces including RS232/RS485 COM ports, a USB-A port for external storage/peripherals, a USB-B download port, and an RJ45 Ethernet port for PLC synchronization and remote monitoring.
XINJE TS3-700-Z Human-Machine Interface (HMI) (TS Series).
-
REQUEST A QUOTE
- Total I/O Points: 60 points (comprising 36 digital inputs and 24 digital outputs).
- Input Type: Dual compatibility supporting both NPN and PNP signals.
- Output Type: Relay (R), making it highly reliable for switching heavier electrical loads compared to transistor variants.
- Power Supply: AC 100V ~ 240V (standard AC220V compatibility).
- High-Speed Counting: Supports built-in high-speed counting up to 80KHz alongside 2-way AB phase counting, suitable for connection with incremental encoders.
- Communication Interfaces: Equipped with a standard RS232 port for program uploads/downloads via the XC Pro software, and a standard RS485 port for Modbus networking or peripheral communication.
- System Expansion: Supports the addition of up to 7 external expansion modules and external expansion BD boards to scale up I/O capacity or integrate specialized functions.
- Condition: Brand NEW Model:XC3-60R-E This item include: 1Pcs XC3-60R-E XC3-60R-E Main Feature Host 36 in/24 out, relay output, AC10…
XINJE XC3-60R-E PLC (XC3).
-
REQUEST A QUOTE
- Manufacturer: Yaskawa Motoman Robotics
- Part Number: CBL-NXC025-1 (Alternative Motoman Part #: 152029-1)
- Length: 8 meters (approx. 26 feet)
- Robot Generation: NX100 Controller Platform
- Function: Transmits data, safety circuit signals, and power between the teach pendant (X81/X82 connections) and the robot controller.
- Compatible Robot Models: Frequently used across various Motoman industrial arms under the NX100 generation, including the EA1400N, EA1900N, ES165N, ES200N, HP6, HP20, HP50, HP165, HP200, and UP50N.
YASKAWA CBL-NXC025-1 Teach Pendant Cable (Motoman).
-
REQUEST A QUOTE
- Official Part Number: CBL-XR005-1 (Alternative Motoman Part #: 142313-1)
- Cable Length: 8 meters (approx. 26.2 feet)
- Weight: 3.63 lbs
- Primary Interface: X81 connector style
- Hardware Compatibility: Specifically tailored for Yaskawa XRC Series robot controllers and pairs with JZNC-XPP02B or JZNC-XPP04B teach pendants.
YASKAWA CBL-XR005-1 Teach Pendant Cable (Motoman).
-
REQUEST A QUOTE
- Primary Function: Provides a reliable communication and power delivery link between the teach pendant and the robot controller for programming, jogging, operator input, and diagnostics.
- Compatible Controllers: Fully compatible with Yaskawa Motoman DX100, DX200, and FS100 controller systems.
- Compatible Teach Pendants: Designed for standard Motoman programming pendants, including models like the JZRCR-YPP01-1 and JZRCR-YPP21-1.
- Yaskawa Part Number: 156798-1.
- Available Lengths: Typically provisioned as a standard 8-meter (approx. 26 feet) cable, but also available in 10-meter and 15-meter variants to support different workcell dimensions.
- Connection Interface Configurations: Available in variant configurations such as the X81 and X82 series connection standards.
- Industrial Build: Built with a rugged, high-flex jacket designed to withstand harsh manufacturing environment strains, repetitive mechanical flex stress, oil exposure, and extreme factory floor conditions.
- Official Ordering: View parts directly on the official Yaskawa Motoman Portal.
- Industrial Documentation Platforms: Download associated PDF datasheets via automation repositories such as RGB Automatyka.
YASKAWA CBL-YRC061-1 Teach Pendant Cable (Motoman).
-
REQUEST A QUOTE
- Input Voltage: 3-Phase 200V–240Vac (50/60 Hz)
- Output Voltage & Frequency: 0–240Vac, 0.01–400 Hz
- Maximum Motor Capacity: 3.7 kW (Normal Duty) / 4 HP
- Rated Output Current: 18 Amps
- Output Capacity: 6.9 kVA
- Enclosure Rating: IP20 / NEMA 1
- Communication Capability: RS-422 + RS-485
- High Responsiveness: Offers a torque response capability of 300 Hz, allowing rapid power output modifications to handle sudden load shifts smoothly.
- Overload Capacity: Built for demanding conditions with an overload rating of up to 150% for 1 minute.
YASKAWA CIMR-G7A23P7 Inverter Drive (Varispeed G7).
-
REQUEST A QUOTE
- Manufacturer: Yaskawa Motoman
- Model / Part Number: JZRCR-YPP01-1
- Compatible Controller: Yaskawa Motoman DX100
- Display Type: Color LCD Touch Screen
- Screen Size: 5.7 inches (Diagonal)
- Resolution: 640 x 480 pixels (VGA)
- Operating System: Windows CE
- Memory Expansion: CompactFlash (CF) card slot
- Connectivity: USB and Ethernet support
- Physical Weight: ~8.45 lbs (3.83 kg)
YASKAWA JZRCR-YPP01-1 Teach Pendant (Motoman).
