Showing 1713–1728 of 2013 results
-
REQUEST A QUOTE
- Product Line / Model: PNOZmulti 2 / PNOZ m B0.1
- Supply Voltage: 24 V DC
- Total Safe Inputs: 20 safe digital inputs (12 dedicated + 8 configurable)
- Safe Outputs: 4 safe semiconductor outputs
- Test Pulse Outputs: 4 outputs
- Programming Interface: Mini USB connection
- Storage Medium: Requires a 32 kB chip card (not included)
- Mounting & Housing: DIN35 rail mounting, IP20 protection
- Expandable Architecture: The base unit can be expanded with digital I/O modules, relay outputs, or communication fieldbus modules (e.g., PROFINET, EtherNet/IP, Modbus).
- Software Configuration: Configured graphically via drag-and-drop using the PNOZmulti Configurator software platform.
PILZ 772104 Configurable Safety Controller (PNOZ m).
-
REQUEST A QUOTE
- Manufacturer: Pilz GmbH & Co. KG
- Product ID / MPN: 774041
- Supply Voltage: 24 V DC (Acceptable range: 20.4–26.4 V DC)
- Inputs: 1-channel wiring (single safety input, 24Vdc/50mA)
- Safety Outputs: 1 N/O (Normally Open) delayed safety contact (6A capacity)
- Auxiliary Outputs: 2 N/C (Normally Closed) delayed auxiliary contacts
- Time-Delay Range: 0 to 3 seconds, selectable across 12 distinct levels (0.3s to 3.0s)
- Safety Integrity: Up to SIL 3 / PL d / Cat. 3 depending on implementation architecture
- Connection Type: Built-in fixed screw terminals
- Mounting & Width: 45 mm wide housing, DIN rail mounting
PILZ 774041 Safety Relay (PNOZ X).
-
REQUEST A QUOTE
- Series: Pilz PNOZ X Series
- Outputs: 2 Normally Open (N/O) instantaneous safety contacts
- Inputs: 1/2-channel wiring configuration with or without cross-circuit short detection
- Physical Profile: 45 mm compact width, designed for DIN rail railing mounting
- Terminals: Integrated fixed screw termination
- Safety Ratings: Up to SIL 3 / PL e / Cat. 4 depending on installation wiring
- E-STOP Pushbuttons: Detects dual-channel or single-channel emergency stop breaks.
- Safety Gates: Monitors interlocking switches or limit switches on machine guards.
- Pressure-Sensitive Mats: Configured to monitor short-circuit principle safety mats.
- Feedback Loop: Built-in capability to monitor external relays or contactors.
PILZ 774066 Safety Relay (PNOZ 16).
-
REQUEST A QUOTE
- Adjustable Pressure Range: 0.1 to 0.8 MPa (14.5 to 116 PSI).
- Max Supply Pressure: 1.0 MPa (145 PSI).
- Features: Built-in pressure gauge (5% accuracy), integrated pressure relief mechanism for easier downstream adjustments.
- Differences: RVUM6-6 vs. RVUMP6-6 (Successor)
- Higher Flow Capacity: The new design enables roughly 1.3 times higher flow rate than the legacy model.
- Improved Stability: Features a push-lock setting knob and a reduced set pressure fluctuation range.
- Form Factor: Keeps the same 6mm inline configuration for an easy drop-in replacement.
PISCO RVUM6-6 Pneumatic Pressure Regulator (RVUM Series).
-
REQUEST A QUOTE
- Series Type (MSA): Heavy Load Type featuring a 45° ball contact angle. This configuration allows the block to bear equal radial, reversed radial, and lateral loads seamlessly in any mounting orientation.
- Block Type (S): Square type carriage with a compact width, designed to be securely installed from the top side.
- Dimensions: Measures approximately 28mm (Height) × 34mm (Width) × 56.3mm (Length).
- Sealing & Preload Code (SSSFCN): Indicates specific end seals, side seals, inner seals, and a light-to-medium balanced preload designed to optimize rigidity while minimizing friction.
- HIWIN: HGH15CA
- NSK: NSRH15BZ
PMI MSA15SSSFCN Linear Guide Carriage (MSA Series).
-
REQUEST A QUOTE
- MSB: Series name representing a compact type linear guideway with a 45-degree four-row ball train contact angle.
- SS: Standard seals equipped at both ends to prevent dust contamination and retain lubricants.
- FCN: Part designation indicating high-accuracy carbon steel material construction and standard manufacturing precision clearance.
- Height (Assembly H): 28 mm
- Width (W): 42 mm
- Length (L): 67 mm
- Patented Lubrication Trajectory: Houses a specialty internal lubrication route ensuring grease or oil is divided evenly across all recirculation loops, improving reliability and running accuracy.
PMI MSB20SSSFCN Linear Guide Carriage (MSB Series).
-
REQUEST A QUOTE
- Display Type: 10.4-inch TFT Color LCD, supporting up to 64 colors.
- Resolution: 640 x 480 pixels (VGA).
- Power Supply: 24V DC input (allowable range ±20%).
- Power Consumption: 50W or less (typically around 20W).
- Dimensions: 317mm x 243mm x 85mm.
- Environmental Protection: Meets NEMA 4X/12 and IP65f ratings, providing excellent protection against water and dust in harsh factory environments.
- Configuration Software: Programmed using standard Pro-face legacy software, specifically GP-Pro/PBIII.
- Same Cutout Size: For a drop-in physical replacement without cutting into your cabinet panel, use the SP5000 Series combined base and panel modules (e.g., PFXSP5600TPD paired with PFXSP5B10).
- Different Cutout Size: The GP4000 Series (PFXGP4501TMD) acts as a highly functional software replacement but features alternative physical dimensions.
- Product Description P/N: GP577R-TC41-24VP * Description. The GP577R-TC41-24VP is a 10.4-inch operator interface from Pro-Face. It …
PRO-FACE GP577R-TC41-24VP Human-Machine Interface (HMI) (GP577R).
-
REQUEST A QUOTE
- Manufacturer: Schneider Electric Pro-face
- Series / Model: GP4000E Series / GP-4502WW
- Display Type: TFT Color LCD with Analog Resistive Touch Film
- Screen Size: 10.1-inch Widescreen (Effective area: 219.6 x 131.76 mm)
- Resolution: 800 x 480 pixels (WVGA)
- Display Colors: 65,536 colors
- Backlight Type: LED (Service life ≥ 20,000 hours with 8-level brightness control)
- Input Voltage: 24 VDC (Power consumption ≤ 10 W)
- Application Memory: 32 MB Flash EPROM (128 KB Flash EPROM backup memory)
- Cooling Method: Natural air circulation (no cooling fans)
- Front Panel Rating: IP65F / Enclosure Type 4 Indoor Use Only
- Ethernet: 10/100 Base-T port for networking, PLC connectivity, and remote monitoring.
- USB Ports: 1 x USB 2.0 Type-A (for data logging and storage) and 1 x USB 2.0 mini-B (for project transfer).
- Programming Software: Managed via GP-Pro EX Software, which allows configuration for animations, alarm analysis flows, XY graphs, and multi-device drivers.
- Remote Supervision: Supports remote monitoring and data acquisition via GP-Viewer EX software.
- Mounting Options: Can be seamlessly integrated into panels using either landscape or portrait orientation layouts.
Pro-Face PFXGP4502WADW Widescreen HMI Panel (GP4000E Series).
-
REQUEST A QUOTE
- Backplane Power Consumption: 5 VDC, maximum 1100 mA.
- Operating Temperature: 0°C to 60°C (32°F to 140°F).
- Lifecycle Status: Discontinued by Manufacturer (Categorized as a legacy product by ProSoft Technology).
- Integration Capabilities: Operates using comDTM technology, making it compatible with asset management applications like PACTware and Endress+Hauser FieldCare.
- Legacy Drop-in Context: It offers similar capability and performance to the legacy Modicon 140 CRP 811 00 module, though it requires project configuration modifications rather than being a direct physical substitution.
- Configuration Process: Configured via the ProSoft Configuration Builder (PCB) software, which defines data block sizes, node mapping, GSD files, and CPU start registers. It transfers diagnostic data, acyclic reads/writes, and handles Hot Standby network syncing.
Pro-Soft PTQ-PDPMV1 PROFIBUS DP Master Module (PTQ Series).
-
REQUEST A QUOTE
- Protocol Support: PROFIBUS DPV1 (Cyclic I/O data and acyclic messaging).
- Hardware Form Factor: In-chassis module for 1769 CompactLogix systems (slots into the local I/O bank or remote 1769 expansion racks).
- Configuration Interface: Integrated via Studio 5000 / RSLogix 5000 as a standard I/O module using an Add-On Profile (AOP).
- Physical Hardware Address: Equipped with rotary switches to easily set the node's PROFIBUS bus address.
- Remote Access: The dedicated Ethernet port eliminates the need to plug directly into the module hardware on the plant floor; configuration and advanced troubleshooting can be handled over the plant network.
- Seamless PLC Integration: Appears to the CompactLogix controller as standard native I/O. Explicit CIP ladder logic message blocks handle slave status diagnostics and acyclic DP-V1 data commands.
- Configuration Flexibility: The module can automatically adapt to parameters downloaded from the PROFIBUS network Master or follow configuration locked down locally by the Logix processor.
ProSoft ILX69-PBS PROFIBUS Slave Module (ILX69 Series).
-
- Manufacturer: PULS
- Model / Part Number: CD10.241
- Rated Power: 240 W
- Input Voltage: 18 to 35 VDC, 24 VDC nominal
- Output Voltage: 24 to 28 VDC adjustable
- Output Current: 10 A at 24 VDC; 8.6 A at 28 VDC
- Galvanic Isolation: Input-to-output isolation
- Efficiency: Up to 94.2%
- Dimensions: 42 x 124 x 117 mm
- Operating Temperature: -25 to 70 °C
-
REQUEST A QUOTE
- Input Voltage Range: 18 – 32.4V DC (24V DC nominal)
- Output Voltage: 12 – 15V DC (Adjustable)
- Output Current: 8A (at 12V) to 6.4A (at 15V)
- Output Power: 96W nominal
- Efficiency: Up to 88.2%
- Dimensions: 32mm Width x 124mm Depth x 102mm Height
- Power Reserves: Includes a 20% PowerBoost feature, allowing it to continuously deliver up to 115W at ambient temperatures up to +45°C.
- Electrical Isolation: Features safe galvanic isolation between the input and the output circuits.
- Circuit Protection: Built-in soft-start function to minimize inrush current spikes, paired with reverse input polarity protection.
PULS CD5.121 DC/DC Converter (DIMENSION CD).
-
REQUEST A QUOTE
- Manufacturer: PULS
- Model / Part Number: CD5.241
- Input Voltage: 18–32.4 V DC (24 V nominal)
- Output Voltage: 24 V DC
- Output Current: 5 A continuous
- Output Power: 120 W
- Efficiency: Up to 90.3%
- Width: 32 mm
PULS CD5.241 DIN-Rail DC-DC Converter. Key specifications include Input Voltage: 18–32.4 V DC (24 V nominal); Output Voltage: 24 V DC; Output Current: 5 A continuous; Output Power: 120 W.
-
- Manufacturer: PULS
- Model / Part Number: CP20.241
- Input Voltage: Wide-range input accepting AC 100–240V or DC 110–150V.
- Output Voltage: 24V DC, adjustable up to 28V DC via the front dial.
- Output Current: 20A at 24V (or 17.1A at 28V).
- Rated Power: 480 Watts.
- Physical Size: Extremely slim design at just 48mm wide, saving valuable space on your panel.
- Power Reserves (PowerBoost): Includes a 20% continuous power reserve.
-
REQUEST A QUOTE
- Output Voltage: 24V DC (manually adjustable from 24–28V DC via front potentiometer)
- Output Current: 10A at 24V (continuous output)
- Power Reserve: 20% PowerBoost (delivers up to 12A / 288W continuously at ambient temperatures up to +45°C)
- Input Voltage: Single-phase 115/230V AC with auto-select input, preventing mis-wiring damage
- Efficiency: Reaches up to 91.6% efficiency with low heat generation
- Physical Profile: Only 60mm wide, maximizing control panel space
- Connections: Heavy-duty screw clamp terminals
Puls CS10.241 Single-Phase DIN-Rail Power Supply (DIMENSION C-Line Series).
-
- Brand: PULS
- Model: ML100.100
- Series: MiniLine
- Rated output power: 100 W
- Nominal output: 24 V DC, 4.2 A
- Output adjustment: 24–28 V DC
- Output current at 28 V: 3.6 A
- AC input: 100–120 / 220–240 V AC, automatic range selection
- Typical efficiency: 90%
- Full-load ambient range: -10 to +60 °C
- Derating above +60 °C: 2.5 W per °C
- Mounting: DIN rail
- Connections: Spring-cage terminals
- Weight: 360 g
