Showing 1–16 of 28 results
-
REQUEST A QUOTE
- Sensing Range: 200 mm to 1000 mm (0.2–1 meter)
- Output Type: PNP, Normally Open (N/O)
- Electrical Connection: M12 connector
- Operating Voltage: 18–35 V DC
- Ultrasonic Frequency: 200 kHz
- Adjustment: Built-in potentiometer for fine-tuning the detection threshold
- Form Factor: Block / rectangular design with integrated bracket mounting
- Manufacturer Part Number (MPN): 559539
PEPPERL+FUCHS 3RG6343-3AB00-PF Ultrasonic Proximity Sensor (3RG6 Series).
-
REQUEST A QUOTE
- Sensing Method: Capacitive
- Installation: Non-flush / unshielded
- Output Type: 2-wire AC, Normally Open (NO)
- Switching Frequency (f): 0 to 10 Hz
- Sensitivity Adjustment: Integrated potentiometer for adjustable switching distance
- Housing Design: Cylindrical threaded barrel, M30 metric thread size
- Dimensions: 30 mm Diameter x 80 mm Length
- Material: PBT (Polybutylene Terephthalate) housing and sensing face
- Protection Rating: IP67 (dust tight and water resistant)
- Connection Type: Built-in 2-meter PVC cable (2 x 0.75 mm² core cross-section)
PEPPERL+FUCHS CJ10-30GK-WS Capacitive Proximity Sensor (CJ Series).
-
REQUEST A QUOTE
- Device Type: Control interface unit / RFID evaluation unit.
- Channels & Connections: Supports up to 2 channels/ports. It can connect up to 2 read/write heads, or alternatively, 1 read/write head and 1 trigger sensor.
- Protocols: Built-in 2-port Ethernet switch supporting TCP/IP, PROFINET, EtherNet/IP, and MODBUS TCP.
- Electrical: Operating voltage of 20 to 30 V DC (PELV), with a power consumption of 3.5 W (excluding heads).
- Physical Connectors: Heavy-duty M12 plug connections for Ethernet, power, and read/write heads. Includes an M4 grounding screw.
- Housing & Protection: Rugged, powder-coated aluminum housing measuring 42mm x 62mm x 137mm with an IP67 environment protection rating.
PEPPERL+FUCHS IC-KP2-1HB17-2V1D 200876 RFID Control Interface (IDENTControl).
-
REQUEST A QUOTE
- Channels/Ports: 2 channels (supports up to 2 read/write heads, or 1 head and 1 trigger sensor).
- Network Interfaces: Multi-protocol Ethernet support including EtherNet/IP, PROFINET IO, Modbus TCP, and TCP/IP.
- Integrated Switch: Features an integrated 2-port switch for network loop-through line topologies.
- Power Supply: 20 to 30 V DC.
- Protection Rating: IP67 rugged design.
- Housing Material: Powder-coated aluminum.
- Connections: M12 plug connectors for power, Ethernet, and read/write heads.
PEPPERL+FUCHS IC-KP2-2HB17-2V1D RFID Evaluation Unit (IDENTControl).
-
REQUEST A QUOTE
Single-axis 360° inclination sensor for precise position monitoring on mobile equipment and industrial machinery.
Technical Specifications
- Measuring Range: 0° to 360°
- Analog Output: 0-5 V
- Switching Outputs: 2 programmable PNP, normally open
- Supply Voltage: 10-30 V DC
- Connection: 5-pin M12 x 1
- Environmental Design: High shock resistance and E1 approval
- EMC Immunity: Up to 100 V/m
Variant note: For 4-20 mA output, use INX360D-F99-I2E2-V15.
PEPPERL+FUCHS INX360D-F99-U2E2-V15 Inclination Sensor (INX360D).
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-1.30
- Channels: 1-Channel (protects 2 signal lines)
- Nominal Voltage: 24 V DC
- Rated Current: 250 mA
- Series Resistance: < 0.5 Ω per line
- Leakage Current: < 10 µA at 24 V (at 25 °C)
- Mounting Style: 35mm DIN Rail Mount
- Enclosure Rating: IP20
- Safety Integrity Level: Up to SIL 3
- Auto Reset: Built for uninterrupted operation. The module resets automatically after a surge event clears.
-
REQUEST A QUOTE
- Voltage & Current: 24V DC nominal voltage, 30V DC maximum continuous operating voltage, and a 250 mA rated current.
- Surge Capability: Handles a total discharge current of 20 kA (8/20 µs pulse) and an impulse discharge current of 2 kA per line (10/350 µs).
- Safety Certification: Rated up to SIL 3 safety standards.
- Line Protection: Features 2 protected signal lines with a built-in series resistance of less than 0.5 Ω per line.
- Mounting & Protection: Mounts onto standard 35mm DIN rails with an IP20 housing protection rating.
PEPPERL+FUCHS K-LB-1.30G Surge Protection Barrier (K-System).
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-1.6G
- Channels: 1-channel module
- Rated Voltage: ≤ 6 V DC (up to ≤ 12 V in an on-state)
- Rated Current: 250 mA
- Maximum Surge Current: 20 kA per line based on an 8/20 μs pulse
- Leakage Current: ≤ 5 µA
- Response Time: Super-fast 1 nanosecond symmetrical / 100 nanoseconds asymmetrical
- Operating Temperature: -30 °C to 80 °C (T6 rating drops to ≤ 50 °C)
- Mounting Type: Snaps directly onto standard 35 mm DIN mounting rails.
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-2.6
- Channels: 2 separate channels.
- Operating Voltage: ≤ 6V DC (with an on-state maximum of ≤ 12V).
- Maximum Surge Current: 20 kA per line using standard 8/20 µs wave pulses.
- Response Time: Ultra-fast, triggering in 1 nanosecond (ns) for symmetrical surges.
- Mounting Type: Standard DIN rail mount module.
- Ground Isolation: Features 500V DC ground insulation to protect connected instrumentation from ground loops.
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: K-LB-2.6G
- Nominal Voltage: 1 V DC
- Max Continuous Operating Voltage: 6 V DC
- Rated Current: 250 mA
- Series Resistance: < 0.5 Ω per line
- Total Number of Protected Lines: 4 lines
- Voltage Protection Level: Max 90V line-to-line / 25V line-to-earth
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: KCD2-RR-EX1
- Function: Resistance signal repeater
- Supported Sensors: Pt100, Pt500 and Pt1000 RTDs
- Output: Resistance output
- Supply Voltage: 24 VDC
- Mounting: DIN rail or Power Rail
- Housing Width: 12.5 mm
- Line Fault Detection: Open-circuit and short-circuit detection
-
- Manufacturer: Pepperl+Fuchs
- Model / Part Number: KCD2-SOT-EX2
- Operating Voltage: 24 V DC
- Mounting Type: 35 mm DIN Rail
- Indicators: Built-in LEDs to quickly show power, output status, and wiring faults
-
- Manufacturer: PEPPERL+FUCHS
- Model / Part Number: KCD2-SR-EX1.LB
- Signal Type: Digital Input
- Number of Channels: 1 channel
- Functional Safety: Up to SIL 2 (Safety Integrity Level) according to IEC/EN 61508
- Power Consumption: ≤ 750 mW
- Input Options: NAMUR sensors or dry (mechanical) contacts
- Output Type: Relay contact output & Fault relay contact output
- Housing Width: Ultra-compact 12.5 mm space-saving design
- Mounting: 35 mm DIN mounting rail
- Line Fault Detection (LFD): The device actively monitors field lines for breakages (≤ 0.1 mA) or short circuits (≥ 6.5 mA) to increase operational safety.
-
REQUEST A QUOTE
- Supply Voltage: 24 V DC (operational range 19–30 V DC via Power Rail or terminals)
- Channels: 2 fully independent channels
- Inputs: Dry contact mechanical switches or NAMUR sensors
- Outputs: Relay contacts (1 NO configuration per channel)
- Housing Width: Ultra-compact 12.5 mm space-saving design
- Functional Safety: Certified up to SIL 2 (SC 3) in accordance with IEC/EN 61508
- Features: Line Fault Detection (LFD) for open-circuits or short-circuits, and reversible operating direction via DIP switches
PEPPERL+FUCHS KCD2-SR-EX2 216720 Switch Amplifier (KCD2).
-
REQUEST A QUOTE
- Power Requirements: 24 V DC supply voltage via loop power (no separate power supply required).
- Signal Range: Handles input and output analog currents from 0 mA to 40 mA.
- Control Voltage: 4 V to 35 V DC.
- Accuracy & Linearity: High accuracy calibrated to ±1%.
- Safety & Integrity: Up to SIL 2 (Systematic Capability SC 3) compliant according to IEC/EN 61508.
- Hardware Profile: Measures 20 mm in width (compact K-System housing) featuring screw terminal connections, reverse polarity protection, and standard 35 mm DIN rail mounting.
- Specifications: * Number of Channels: 1. * Supply Voltage: 24 V DC (loop powered) * Input: Current. * Output: 0 to 40 mA. * I/P or…
PEPPERL+FUCHS KFD0-CS-EX1.51P Isolated Barrier (KFD0).
-
