Jungui Automation

Proximity Switch

Showing all 10 results

  • CFDK-25G1125-LN4 Proximity Switch For BANNER

    BANNER CFDK-25G1125-LN4 Capacitive Proximity Sensor (CFDK Series)

    REQUEST A QUOTE

    • Manufacturer: Baumer
    • Mounting Type: Flush / Shielded
    • Output Circuit: Push-Pull (NPN/PNP selectable depending on wiring)
    • Maximum Output Current: < 100 mA
    • Current Consumption (No Load): Max. 15 mA
    • Switching Frequency: < 35 Hz
    • Dimensions: 52.4 mm (Length) x 25 mm (Width) x 6 mm (Depth)
    • Housing Material: Polyamide (PA 12)
    • Connection Type: 2-meter PVC Cable (3 × 0.14 mm²)
    • IP Protection Rating: IP 65

    Brand New BANNER CFDK-25G1125-LN4 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • DF-G1-NS-2M Proximity Switch For BANNER

    BANNER DF-G1-NS-2M Dual Display Fiber Optic Sensor Amplifier (DF-G1 Series)

    REQUEST A QUOTE

    • Part Number: 19350
    • Input Voltage: 10–30 V DC (12V DC / 24V DC nominal)
    • Output Type: 1 x NPN Transistor Digital Output
    • Response Time: 0.2 ms (200 μs)
    • Sensing Beam: Visible Red Light (660 nm wavelength)
    • Connection Type: Pre-wired 2 m (6.5 ft) cable with bare end flying leads
    • Housing Material: Thermoplastic
    • Environmental Rating: IP50, NEMA 1
    • Operating Temperature: -10°C to +55°C
    • Sensing Range: Dependent upon the specific fiber optic assembly attached

    Brand New BANNER DF-G1-NS-2M Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • SME-8-K-LED-230 152820 Proximity Switch For FESTO

    FESTO SME-8-K-LED-230 152820 Magnetic Proximity Sensor (SME Series)

    REQUEST A QUOTE

    • Measuring Principle: Magnetic Reed
    • Operating Voltage (AC/DC): 3 V to 230 V
    • Switching Output: Contact-based, Bipolar
    • Switching Element Function: Normally Open (N.O.) Contact
    • Electrical Connection: 2-wire / Open-end cable
    • Standard Cable Length: 2.5 meters (8.2 feet)
    • Mounting Profile: Clamped in T-Slot (Lengthwise insertion)
    • Status Indicator: Integrated LED (Yellow switching status)
    • Operating Temperature Range: -5°C to +60°C (23°F to 140°F)
    • Tightening Torque: 0.2 Nm

    Brand New FESTO SME-8-K-LED-230 152820 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • SME-8-S-LED-24 150857 Proximity Switch For FESTO

    FESTO SME-8-S-LED-24 150857 Magnetic Proximity Sensor (SME Series)

    REQUEST A QUOTE

    • Feature / Attribute: Specification
    • Sensing Method: Magnetic Reed (Contact-based, bipolar)
    • Switching Function: Normally Open (N.O. / N/O contact)
    • Operating Voltage: 12 V to 30 V AC / DC (24 V Nominal)
    • Response Speeds: Turn-on time: 0.5 ms | Release time: 0.03 ms
    • Ingress Protection: IP67 (Fully dust-tight and water immersion proof)
    • Operating Temperature: -40°C to +70°C (Static cable) | -5°C to +70°C (Flexible loop installations)
    • Status Indicator: Integrated Yellow LED
    • Housing Materials: Polycarbonate (PC), PET, Epoxy Resin, High-alloy Stainless Steel
    • Environmental Compliance: RoHS Compliant, free of Copper and PTFE

    Brand New FESTO SME-8-S-LED-24 150857 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • SME-8M-DS-24V-K-2,5-OE 543862 Proximity Switch For FESTO

    FESTO SME-8M-DS-24V-K-2,5-OE 543862 Magnetic Proximity Sensor (SME Series)

    REQUEST A QUOTE

    • Measuring Principle: Magnetic Reed
    • Switching Output: Contacting, bipolar
    • Switching Element Function: Normally Open (N.O.) contact
    • Operating Voltage Range: 5 V – 30 V DC / 5 V – 30 V AC
    • Electrical Connection: 3-wire cable with an Open End (stripped flying leads)
    • Cable Length: 2.5 meters (TPE-U / PUR sheath material)
    • Mounting: Direct, vertical insertion into the T-slot from above (flush mount, does not protrude)
    • Ingress Protection: IP65 and IP68 rated (dust-tight and submersible)
    • Operating Temperature Range: -40°C to +70°C

    Brand New FESTO SME-8M-DS-24V-K-2,5-OE 543862 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • SMPO-1-H-B 31008 Proximity Switch For FESTO

    FESTO SMPO-1-H-B 31008 Pneumatic Proximity Sensor (SMPO Series)

    REQUEST A QUOTE

    • Sensing Method: Magnetic, non-contact detection
    • Design / Form Factor: Block / Rectangular design without mounting kit
    • Pneumatic Connection: PK-3 Barbed Fitting
    • Operating Pressure Range: 2 to 6 Bar (29 to 87 PSI)
    • Operating Temperature Range: -15°C to +60°C (5°F to 140°F)
    • Materials: Brass, Polyamide (PA), Polyoxymethylene (POM)
    • Ingress Protection Rating: IP65 (Dust-tight and protected against water jets)
    • Wiring Configuration: 3-wire contact setup

    Brand New FESTO SMPO-1-H-B 31008 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • CDM-2MX+MR-1 Proximity Switch For FOTEK

    FOTEK CDM-2MX+MR-1 Photoelectric Sensor (CDM Series)

    REQUEST A QUOTE

    • Sensor Type: Photoelectric (Mirror Reflex / Retro-reflective)
    • Form Factor: M18 Tubular (Threaded barrel)
    • Sensing Direction: Horizontal (Standard barrel) / Vertical option
    • Sensing Distance: 0.1 meters to 2.5 meters (0.1m ~ 2.5m)
    • Operating Voltage: 10 to 30 VDC
    • Current Draw: 20 mA max.
    • Output Method: Simultaneous NPN & PNP (150 mA max)
    • Output Status: Normally Open (NO)
    • Sensitivity: 270° Trimmer adjustment
    • Protection Rating: IP66

    Brand New FOTEK CDM-2MX+MR-1 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • CJ10-30GK-WS Proximity Switch For PEPPERL+FUCHS

    PEPPERL+FUCHS CJ10-30GK-WS Capacitive Proximity Sensor (CJ Series)

    REQUEST A QUOTE

    • Sensing Method: Capacitive
    • Installation: Non-flush / unshielded
    • Output Type: 2-wire AC, Normally Open (NO)
    • Switching Frequency (f): 0 to 10 Hz
    • Sensitivity Adjustment: Integrated potentiometer for adjustable switching distance
    • Housing Design: Cylindrical threaded barrel, M30 metric thread size
    • Dimensions: 30 mm Diameter x 80 mm Length
    • Material: PBT (Polybutylene Terephthalate) housing and sensing face
    • Protection Rating: IP67 (dust tight and water resistant)
    • Connection Type: Built-in 2-meter PVC cable (2 x 0.75 mm² core cross-section)

    Brand New PEPPERL+FUCHS CJ10-30GK-WS Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • NBB10-30GM50-E0 Proximity Switch For PEPPERL+FUCHS

    PEPPERL+FUCHS NBB10-30GM50-E0 Inductive Proximity Sensor (NBB Series)

    REQUEST A QUOTE

    • Sensing Distance: 10 mm rated operating distance with a flush (shielded) mounting profile.
    • Output Configuration: 3-wire DC, NPN, Normally Open (N.O.) switching function.
    • Housing Size: M30 x 1.5 thread diameter with a short 50 mm body length.
    • Operating Voltage: Extended DC voltage range (typically 5 to 36 V DC or 10 to 30 V DC depending on the sub-variant revision).
    • Environmental Resistance: IP67 environmental protection rating with an extended operating temperature range of -40°C to +85°C (-40°F to +185°F).
    • Material: Built with a nickel-plated brass or stainless steel metal housing and a rugged PBT sensing face.

    Brand New PEPPERL+FUCHS NBB10-30GM50-E0 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.

  • CM18-12NPP-KC1 Proximity Switch For SICK

    SICK CM18-12NPP-KC1 Capacitive Proximity Sensor (CM18)

    REQUEST A QUOTE

    • Housing Design: Cylindrical threaded, M18 x 1 thread size, 91.5 mm length.
    • Housing Material: Durable PBT plastic.
    • Installation Type: Non-flush mounting.
    • Switching Output: PNP.
    • Output Function: Complementary (Normally Open [NO] + Normally Closed [NC]).
    • Electrical Connection: M12, 4-pin male connector, DC 4-wire configuration.
    • Operating Voltage: 10 V DC to 36 V DC.
    • Switching Frequency: 30 Hz.
    • Enclosure Rating: IP 67 (dust-tight and water immersion resistant).
    • Circuit Protection: Short-circuit, reverse polarity, and power-up pulse protection.

    Brand New SICK CM18-12NPP-KC1 Proximity Switch. In stock — ships worldwide within 5-10 days.

    1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.