Showing 17–30 of 30 results
-
- Manufacturer: CAREL
- Model / Part Number: IR33F0EN00
- Power Supply: 230 Vac (Alternating Current)
- Temperature Sensor Inputs: 2 NTC probes (Negative Temperature Coefficient temperature sensors)
- Digital Inputs: 1 DI (Can be used for door switches or external alarms)
- Compressor Relay: 8 A
- Defrost Relay: 8 A
- Fan Relay: 5 A
- Terminals: Green screw terminals
- Temperature Range: –50°C to +90°C using standard NTC probes
-
- Manufacturer: CAREL
- Model / Part Number: IR33F0HN00
- Power Supply: 115 to 230 V AC
- Sensor Type: 2 NTC temperature probes
- Relay Outputs: 3 total relays for system control
- Digital Inputs: 2 programmable inputs (like a door switch or alarm)
- Temperature Range: -50 °C to +99 °C
- Display: 2½ digits with an integrated buzzer alarm
- Protection Class: IP65 waterproof front panel rating
- Dimensions: 71mm x 29mm panel cutout size with a 70.5mm depth
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0EN00
- Supply Voltage: 230 V AC
- Input Type: K-Type Thermocouple
- Relay Outputs: 1 Output
- Mounting Type: Front panel mount (Built-in)
- Mounting Cutout: 71 x 29 mm
- Physical Dimensions: 76.2 mm (Length) x 34.2 mm (Width) x 70.5 mm (Depth)
- Protection Rating: IP65 front panel protection
- Built-in Clock and Alarms: Features a real-time clock, a built-in warning buzzer, and an infrared receiver for remote control compatibility.
- HACCP Compliance: Includes Hazard Analysis Critical Control Point (HACCP) data logging monitoring to safely track temperature variations for food service compliance.
- Easy Wiring: Utilizes convenient plug-in screw terminals on the back for fast and secure installation.
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0EP00
- Manufacturer: CAREL
- Model Type: IR33S0EP00 (Refrigeration / Temperature Control)
- Power Supply: 230 Vac (Switching power supply)
- Relay Output: 1 Heavy-duty 16A relay (primarily used for the compressor)
- Sensor/Probe Type: NTC (Negative Temperature Coefficient)
- Digital Inputs: 2 Programmable digital inputs
- Built-in Features: Internal buzzer and infrared (IR) receiver
- Front Dimensions: 76 mm x 34 mm (Depth: 57 mm)
- Installation/Cut-out: 71 mm x 29 mm panel mount
- User Interface: Features a clear digital display paired with explicit status icons (defrost, compressor, alarms) to quickly monitor operations.
- Hygiene Compliance: The flat front panel design aligns with standard food safety and HACCP requirements for commercial refrigeration.
- Network Integration: Supports serial communication cards to connect directly to CAREL supervising networks or Modbus protocols.
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0ER00
- Power Supply: 230V AC (50/60 Hz)
- Output Relay: 1 relay output (8A) typically used to control a compressor, heater, or fan
- Sensor Input: 1 input designed for an NTC probe (Negative Temperature Coefficient)
- Physical Size: Front panel is 76 x 34 mm, with a standard panel cutout/drilling template size of 71 x 29 mm.
-
- Manufacturer: CAREL
- Model / Part Number: IR33S0LN00
- Power Supply: 12 to 24 Volts AC/DC (50/60Hz)
- Outputs: 1 relay output rated at 16A (typically used to control the compressor)
- Inputs: 1 NTC temperature sensor probe input
- Physical Dimensions: Front size is 76×34 mm with a depth of 65 mm. It requires a 71×29 mm panel cutout for mounting.
-
- Manufacturer: CAREL
- Model / Part Number: IR33V7LR20
- Power Supply: Works on low voltage, accepting 12 to 24 Vac or 12 to 30 Vdc.
- Inputs: Includes 2 probe inputs that are compatible with NTC, PTC, or PT1000 temperature sensors.
- Outputs: Features 1 relay output (8A max current) to control devices like compressors, fans, or heaters.
- Control Types: Supports ON/OFF control as well as advanced PID control with auto-tuning.
- Mounting & Protection: Designed for panel mounting and features an IP65 waterproof front panel to protect against dust and moisture.
- Extra Features: Built-in internal buzzer for audible alerts and an infrared (IR) receiver for remote control programming.
-
- Manufacturer: CAREL
- Model / Part Number: IR33W7HR20
- Power Supply: 115 VAC to 230 VAC (multi-voltage)
- Outputs: 2 Relays (8A maximum current) + 1 built-in alarm horn buzzer
- Inputs: 2 configurable probe inputs supporting NTC, PTC, or PT1000 sensors
- Control Type: ON/OFF or smart PID control featuring automatic autotuning
- Display & Interface: Single-line LED screen with 4 navigation buttons and built-in Infrared (IR) receiver
- Enclosure Rating: IP65 front panel protection against dust and water entry
- Mounting Type: Flush panel mount
- PID Autotuning: It uses smart, rule-based algorithms to automatically set heating or cooling parameters. This rules out control swings and optimizes the system for your exact environment.
- Load Protection: The device can enforce minimum ON or OFF cycles to prevent compressors or heating elements from short-cycling, extending the lifespan of your heavy equipment.
-
- Manufacturer: CAREL
- Model / Part Number: IR33Z7HR20
- Power Supply: 115 to 230 VAC (alternating current), making it highly adaptable to different power grids.
- Outputs: 4 relay / digital outputs to switch electrical components (like compressors, fans, or heaters) on and off.
- Inputs: 2 temperature sensor inputs that work with NTC, PTC, or PT1000 probes.
- Two Control Loops: It can run two completely separate control loops independently.
-
- Manufacturer: CAREL
- Model / Part Number: PCO100TLN0
- Network Interface: tLAN serial network
- Network Connectors: 2
- Maximum Network Devices: 5
- Operating Temperature: -10 to 60 °C
- Recommended Cable: Shielded twisted-pair cable, AWG 20/22
-
REQUEST A QUOTE
- Manufacturer: CAREL
- Model / Part Number: PGD1000NW2
- Display Type: Monochrome graphic LCD
- Resolution: 132 x 64 pixels
- Backlight: White LED
- Keypad: 6 buttons
- Communication Interface: RS-485
- Communication Protocol: pLAN
CAREL PGD1000NW2 is a monochrome graphic operator terminal with a 132 x 64 pixel display, white LED backlighting and a six-button keypad. It communicates through an RS-485 pLAN interface.
-
REQUEST A QUOTE
- Manufacturer: CAREL
- Model / Part Number: PGD1AY0I00
- Series: pGD1
- Display: Backlit graphic display
- Resolution: 132 x 64 pixels
- Keypad: 6 buttons
- Buzzer: Integrated
- Communication: RS-485
CAREL PGD1AY0I00 is a pGD1 graphic operator terminal with a backlit 132 x 64 display, six-button keypad and RS-485 communication.
-
- Brand: CAREL
- Model: PLD00GFP00
- Series: pLDPRO
- Display type: Graphic LCD
- Resolution: 132 × 64 pixels
- User keys: 6 buttons
- Audio indication: Piezoelectric buzzer
- Controller connection: RS-485 using pLAN protocol
- Software compatibility: Compatible with applications developed for the pGD1/pCO platform
- Font support: International fonts in 6 × 8 and 12 × 16 pixel sizes
- Installation: Panel mount
- Panel cut-out: 71 × 29 mm
- Operating temperature: -20 to +60 °C
- Front protection: IP65
-
REQUEST A QUOTE
- Manufacturer: CAREL
- Model / MPN: PZXUC0E001
- Device Type: Digital Temperature Controller / PLC Temperature Module
- Display Type: Digital LED Display (typically displaying current temperature or parameter codes)
- Communication Standard: Batibus protocol compatibility
- Sensor Type: Programmable
- Cross-Compatible Series: Often integrated alongside or associated with the PZUXC1E0G1 series
- Adjusting the Temperature Set Point: Press and hold the SET button for a few seconds until the current target temperature flashes. Use the UP or DOWN arrows to adjust, then press SET again to confirm.
- Blinking Compressor Symbol: If the compressor cooling icon is flashing rapidly on your display, the unit may be locked in a Continuous Cycle Mode or a built-in anti-short cycle protection delay. To override or deactivate a manual continuous cycle, typically you press and hold both the UP and DOWN arrows simultaneously for 3 seconds.
- Functional Substitutions: Depending on your exact wiring diagram, standard CAREL parametric controllers from the broader PZU or easy logic series (such as the PZUAC0E520) are frequently substituted if a precise 1-to-1 matching unit is out of stock. Always consult your equipment's wiring schematic before executing an alternative module swap.
CAREL PZXUC0E001 Digital Electronic Temperature Controller (PZXU Series).
