BEN10M-TFR AUTONICS Through-beam Photoelectric Sensor

• Sensing Type: Through-beam type (Emitter + Receiver)
• Sensing Distance: 10 meters (approx. 32.8 feet)
• Sensing Target: Opaque materials (Minimum diameter: Ø16 mm)
• Light Source: Infrared LED (850 nm wavelength)
• Power Supply Voltage: 24–240 VAC ±10% (50/60Hz) / 24–240 VDC ±10% (Ripple P-P: max 10%)
• Power Consumption: Max. 4 VA
• Control Output: Relay contact output (SPDT, 1c contact composition)
• Contact Capacity: 30 VDC 3A resistive load / 250 VAC 3A resistive load
• Operation Mode: Light-ON / Dark-ON (Selectable via built-in switch/VR)
• Response Time: Max. 20 ms
• Indicators: Operation indicator (Red), Stability indicator (Green)
• Connection Method: Cable type (Ø5 mm, 5-wire, Length: 2 meters)
• Ingress Protection: Rated at IEC IP50
• Operating Temperature: -20°C to +65°C (-4°F to 149°F) with no icing or condensation
• Vibration Resistance: 1.5 mm amplitude at a frequency of 10 to 55 Hz in X, Y, Z directions for 2 hours
• Housing Material: Heat-resistant ABS (Case/Cover); Polycarbonate (Sensing lens)
• Dimensions: 18 mm (W) x 50 mm (H) x 50 mm (D)
• Included Accessories: VR adjustment screwdriver, mounting bracket, bolts, and nuts
• Power Connections: The internal power regulator allows you to use standard industrial AC or DC lines without swapping sensor models.
• Relay Protection: When driving inductive loads (like an external contactor or motor coil), use a surge absorber or diode across the load to safeguard the internal SPDT relay contact lifetime.
• Alignment: Emitter and receiver must be mounted directly face-to-face. Use the stability indicator (green LED) to fine-tune the alignment until it stays solidly lit.

Brand New AUTONICS BEN10M-TFR Through-beam Photoelectric Sensor (BEN Series). In stock — ships worldwide within 5-10 days.

1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.