Showing 49–64 of 154 results
-
REQUEST A QUOTE
- Manufacturer: BELIMO
- Model / Part Number: LR24AX-S-TP
- Torque Output: 5 Nm (45 in-lb).
- Control Type: Open/Close or 3-point floating control.
- Angle of Rotation: 90°.
- Running Time: 90 seconds for a full 90-degree rotation.
- Enclosure Rating: IP54 / NEMA 2 (when properly mounted with terminal cover).
- Manual Override: Temporary gear disengagement via an integrated external push-button.
- Ambient Temperature Range: -30°C to 50°C (-22°F to 122°F).
- Terminal Block Integration: The -TP designation indicates screw terminals. You must remove the plastic terminal cap to route your 3-wire control lines.
- Auxiliary Switch Wiring: The built-in -S switch provides a dry contact that changes state at a fixed angle. This is commonly wired back to a Building Management System (BMS) or used to interlock an exhaust fan or pump.
-
REQUEST A QUOTE
- Manufacturer: BELIMO
- Model / Part Number: LR24AX-SR
- Nominal Voltage: AC/DC 24 V, 50/60 Hz
- Operating Range: AC/DC 19.2 to 28.8 V
- Power Consumption (Running): 1.5 W
- Power Consumption (Holding): 0.4 W
- Transformer Sizing: 3 VA (wire sizing)
- Electrical Connection: 1-meter pre-installed cable (4 x 0.75 mm²)
- Torque: Minimum 5 Nm at nominal voltage
- Control Input (Y): DC 2…10 V (Input impedance: 100 kΩ)
- Position Feedback (U): DC 2…10 V
- Angle of Rotation: Maximum 90°, adjustable via mechanical end stops
- Running Time: 90 seconds for a 90° rotation
- Manual Override: External push-button (temporary or permanent gear disengagement)
- Direction of Rotation: Reversible switch setting (0/1 or Left/Right selection)
- Protection Class: Class III (safety extra-low voltage)
- Enclosure Rating: IP54 (NEMA 2, UL Enclosure Type 2)
- Ambient Temperature: -30°C to 50°C [-22°F to 122°F]
-
REQUEST A QUOTE
- Manufacturer: BELIMO
- Model / Part Number: LR24AX-SR-T
- Model Type / Breakdown: LR24AX-SR-T (Type: LRA-T40) Aeliya Marine Tech
- Nominal Voltage: AC/DC 24 V (50/60 Hz) AC 19.2…28.8 V / DC 19.2…28.8 V
- Torque: 5 Nm Ideal for modulating ball valves
- Control Signal (Y): DC 0…10 V Operating range: DC 2…10 V
- Position Feedback (U): DC 2…10 V For electronic position indication (0…100%)
- Power Consumption: 1.5 W (Running) / 0.4 W (Holding) Wire sizing capacity: 3 VA
- Running Time: 90 seconds / 90° rotation Standard motor configuration
- Connection Type: Screw Terminals ("-T") Unprotected terminal strip/cover interface
- Enclosure Rating: IP54 / NEMA 2 Dust and splash-water resistant
- Ambient Temperature: -30°C to 50°C (-22°F to 122°F) Maintenance-free design
- Unit Weight: 420 grams (0.42 kg) Compact and lightweight build
- Simple Direct Mounting: Attaches directly to the ball valve using a single screw. The integrated position indicator doubles as a mounting tool.
- Manual Override: Features an external push button that temporarily disengages the gear train for manual adjustment.
- High Operational Safety: Overload protected with an automatic stop mechanism at the end stops; no mechanical limit switches required.
- Adjustable Rotation Angle: Mechanical end stops allow the default 90° angle of rotation to be customized.
-
REQUEST A QUOTE
- Actuator Type: Electric, Rotary
- Torque: Minimum 45 in-lb
- Control Signal: On/Off, Floating Point
- Supply Voltage: Nominal 24 VAC/VDC
- Running Time: 90 seconds
- Angle of Rotation: 95°
- Manual Override: External Push-button
- Enclosure Rating: NEMA 2 / IP54
- Certifications: cULus, CE, CSA
- Warranty: 5 Years
Brand New BELIMO LRB24-3 Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque: 4 Nm
- Running Time: 9 seconds for a 90° rotation
- Power Supply: 24 V AC/DC (50/60 Hz)
- Control Type: Open/Close or 3-point (Floating)
- Enclosure Rating: IP54 (UL/NEMA 2)
- Mounting: Simple direct mounting on the ball valve via a single central screw.
- Manual Override: Equipped with a manual override push-button to temporarily disengage the gear train for adjustments.
Brand New BELIMO LRQ24A Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Model: LRQU24-SR (or alternative suffix variations like LRQ24A-SR)
- Supply Voltage: 24 V AC/DC
- Torque: 4 Nm (35 in-lb)
- Running Time: 9 seconds for a 90° rotation
- Power Consumption: Running: 13 W | Holding: 2 W
- Enclosure Rating: IP54 / NEMA 2
- Simple Direct Mount: Installs effortlessly onto compatible Belimo Characterized Control Valves (CCV) using a single central screw design.
- Overload Protection: Completely electronic throughout its
- Manual Override: Features an external manual override push-button. Pressing it disengages the internal gear train, allowing for easy manual valve testing or adjustments during power outages.
Brand New BELIMO LRQU24-SR Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Control Type: Multi-Function Technology (MFT), programmable (Default analog 2…10 V DC, but configurable for floating point, PWM, or On/Off).
- Linear Force: 500 N [115 lbf].
- Supply Voltage: AC/DC 24 V (50/60 Hz).
- Power Consumption: 2.5 W running / 1.5 W holding; 4 VA for wire sizing.
- Running Time: 90 seconds (programmable range from 90 to 150 seconds).
- Stroke Length: Up to 0.6" [15 mm] for LV series linkages, or 3/4" [20 mm] for SV series.
- Manual Override: 4 mm hex crank (included).
- Enclosure Rating: IP54 / NEMA 2.
- Electrical Connection: 3 ft [1 m], 18 GA plenum-rated cable with 1/2" conduit connector.
- Assembly Type: Description
Brand New BELIMO LVX24-MFT Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque (Motor & Fail-Safe): 10 Nm
- Control Type: Open/Close (On/Off)
- Running Time (Motor): 75 seconds for a 90° rotation
- Running Time (Fail-Safe): < 20 seconds at room temperature via spring tension
- Auxiliary Switches: 2x SPDT (Single Pole Double Throw) integrated switches for position feedback (one fixed at 10%, one adjustable from 11…90%).
- Power Consumption: 6 W in operation / 2.5 W in rest position
- Enclosure Rating: IP54 / UL Enclosure Type 2
- Shaft Mounting: 10…25.4 mm universal shaft clamp with an anti-rotation mechanism
- Normal Operation: The actuator moves the damper to its operating position while simultaneously tensioning its internal return spring.
- Fail-Safe Mechanism: If the supply voltage is interrupted, the actuator automatically turns the damper back to its safe emergency position using spring force.
Brand New BELIMO NFA-S2 Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Nominal Voltage: AC 100…240 V (50/60 Hz)
- Nominal Torque: 10 Nm
- Control Type: Open-close (On-Off), 3-point
- Power Consumption: 2.5 W (In operation) / 0.6 W (At rest) / 5.5 VA (Wire sizing)
- Running Time: 150 s / 90°
- Angle of Rotation: Max. 95° (Adjustable mechanical end stops)
- Direction of Motion: Selectable with switch 0 (CCW) / 1 (CW)
- Enclosure Rating: IP54 / NEMA 2
- Mechanical Connection: Universal shaft clamp 8…26.7 mm
- Electrical Connection: Cable 1 m, 3 x 0.75 mm²
Brand New BELIMO NM230A Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Supply Voltage: AC/DC 24 V (50/60 Hz)
- Torque: 10 Nm (90 in-lb)
- Control Type: Open/Close or 3-point (floating control)
- Running Time: 150 seconds
- Angle of Rotation: Max. 95°, adjustable with mechanical end stops
- Enclosure Rating: IP54
- Manual Override: Pushbutton to disengage the gear train
- Actuator Model: Control Signal / Protocol
Brand New BELIMO NM24A Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Nominal Voltage: AC/DC 24 V (50/60 Hz)
- Operating Range: AC 19.2…28.8 V / DC 19.2…28.8 V
- Power Consumption (Operating): 1.5 W
- Power Consumption (Rest Position): 0.2 W
- Wire Sizing Capacity: 3.5 VA
- Connection (Supply/Control): 1-meter PVC cable, 3 x 0.75 mm²
- Torque Motor: 10 Nm
- Control Type: Open/close or 3-point
- Integrated Auxiliary Switch: 1 x SPDT (adjustable 0…100%, switching capacity 1 mA…3 A, AC 250 V)
- Direction of Rotation: Reversible (selectable with switch 0 for CCW / 1 for CW)
Brand New BELIMO NM24A-S Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque: 10 Nm
- Nominal Voltage: AC/DC 24 V (50/60 Hz)
- Control Input: Modulating DC 2…10 V (Operating range) / DC 0…10 V input signal
- Position Feedback: DC 2…10 V for electrical position indication
- Running Time: 150 seconds (constant for 90° rotation)
- Power Consumption: 2 W during operation / 0.4 W in rest position / 4 VA wire sizing
- Protection Rating: IP54 / NEMA 2
- Fail-Safe: Non fail-safe (stays in its last position upon power loss)
- Manual Override: Integrated push-button to disengage the gear train for manual adjustment
Brand New BELIMO NM24A-SR Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Torque: 8 Nm (70 in-lb), suitable for air damper sizes up to approximately 2 m².
- Running Time: Ultra-fast 4 seconds for a 90° rotation.
- Nominal Voltage: AC/DC 24 V (50/60 Hz).
- Control Type: Open/Close (Note: It is not designed for 3-point floating applications).
- Power Consumption: 13 W during operation / 2 W at rest.
- Enclosure Rating: IP54 (NEMA 2 equivalent).
- Simple Direct Mounting: Easily fastens to a universal shaft clamp and includes an anti-rotation strap.
- Manual Override: Features a self-resetting push-button that disengages the gear train for manual adjustment.
- High Operational Safety: The motor is completely overload-proof, requires no end-limit switches, and stops automatically when it hits a mechanical end stop.
Brand New BELIMO NMQ24A Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Running Time: 4 seconds for a 90° rotation, making it ideal for processes requiring rapid air volume adjustments.
- Torque: 8 Nm (Newton meters), capable of driving air dampers up to approximately 1.5 m² in size.
- Nominal Voltage: AC/DC 24 V (50/60 Hz).
- Control Type: Modulating 2…10 V DC control signal.
- Position Feedback: 2…10 V DC for precise system monitoring.
- Power Consumption: 13 W while running, 2 W in holding mode, and 23 VA for wire sizing.
- Enclosure Rating: IP54 and NEMA 2, providing solid environmental protection.
- Shaft Connection: Equipped with a universal shaft clamp supporting round and square shafts measuring 8…26.7 mm.
- Manual Override: Includes a lockable, self-resetting push-button to disengage the gear train for manual damper adjustment.
- Rotation Control: Features a selectable direction of motion switch (0/1) and adjustable mechanical end stops to limit the maximum angle of rotation (up to 95°).
Brand New BELIMO NMQ24A-SR Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power & Voltage: 24 V AC/DC (50/60 Hz), with a power consumption of 5 W during operation and 3 W in rest position.
- Control & Feedback: Modulating control input signal of 0–10 VDC, operating range of 2–10 V, and mechanical position feedback of 2–10 V.
- Torque: 20 Nm (Newton-meters) for both motor and spring-return functions.
- Running Time: 140 to 150 seconds for motor operation, and a rapid emergency spring-return fail-safe time of less than 20 seconds.
- Mechanical Interface: Universal shaft clamp compatible with damper spindles ranging from 10 mm to 25.4 mm.
- Environmental Protection: IP54 enclosure rating (NEMA 2) with a permissible ambient temperature range of -30°C to 50°C.
- Fail-Safe Operation: When power is interrupted, the internal mechanical spring automatically drives the connected air damper back to its designated safe position (either fully open or fully closed depending on mounting orientation).
- Manual Override: Features an integrated locking switch and manual crank that allows for temporary positioning of the damper when the system is unpowered.
- Angle of Rotation: Adjustable up to a maximum angle of 95° using integrated mechanical end stops.
- Maintenance: Overload-protected and completely maintenance-free with a rated service life of at least 60,000 fail-safe positions.
Brand New BELIMO SF24A-SR Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Power Supply: 24V AC/DC (50/60 Hz)
- Power Consumption: 0.3 W (running) / 1 VA (for wire sizing)
- Output Control Signal: 2 to 10 VDC or 0.5 to 10 VDC (selectable via an internal slider switch on the PCB)
- Mounting Type: Surface mounted
- Housing Rating: Included NEMA 2 (IP54 protected enclosure)
- Wiring Connection: Screw terminals handling up to 14 AWG max
- Remote Control: Serves as a manual remote dial to position a proportional actuator from 0 to 100% of its rotation angle.
- Minimum Positioner / Limit: Can act as a "higher-of-two" signal selector. When wired inline with a primary controller, it ensures the actuator never closes past the minimum position set on the dial.
- Mechanical Limits: Includes adjustable mechanical stops beneath the turn-knob to physically limit the dial's rotation range.
- Design Data: Design Data. View Project Lists Duplicate with Configuration Continue Shopping. Bookmark this page. Share. Details; …
Brand New BELIMO SGA24 Actuator. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
