Showing 1–16 of 217 results
-
REQUEST A QUOTE
- Series: B&R System 2003
- Module Type: AF101 Analog Interface Adapter Module
- Capacity: 4 expansion slots for screw-in sub-modules
- Weight & Form Factor: Approximately 0.21 kg to 0.40 lbs (Packaged shipping weight can vary up to 2 kg). Dimensions are roughly 12 x 9 x 7 cm.
- Compliance Certifications: CE, UKCA, UL (cULus E115267), and EAC approved.
Brand New B&R 7AF101.7 Analog Interface Module (System 2003 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Encoder Protocol: Supports EnDat 2.1 absolute encoders and sine incremental encoders.
- Encoder Power Supply Output: Provides 5 V DC at up to 250 mA.
- Physical Interface: Equipped with a 15-pin female D-sub connection.
- Slot Compatibility: Plugs into Slot 1 of ACOPOS servo drives.
- Signal Frequency Capacity: 300 kHz at -3 dB; 400 kHz at -5 dB.
- Data Protocol: RS485 communication protocol up to a maximum baud rate of 625 kbaud.
- Hardware Diagnostics: Automatically identified by the drive firmware upon startup; features built-in LED indicators and line monitoring to instantly catch open circuits or encoder supply faults.
- Physical Specs: Enclosed in an IP20 protection class shell when fully seated; weighs roughly 0.08–0.1 kg.
Brand New B&R 8AC120.60-1 Encoder Interface Module (8AC Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Channels: 16 digital input channels, divided into 2 individually isolated groups (8 channels + 1 voltage supervision input per group)
- Rated Input Voltage: 24 V DC (Sink type input configuration)
- Input Voltage Range: Signal (0): -30 to +5 V
- Input Current / Impedance: 6 mA typical at 24 V / Input Impedance: 3.5 kΩ
- Selectable Filter Times: 2 ms, 4 ms, 8 ms, or 16 ms
- Power Dissipation: 1.8 W (Typical)
- Isolation Rating: 50 V rated insulation voltage; 500 V AC dielectric test voltage
- Compatible Module Termination Units (MTUs): TU810, TU812, TU814, TU818, TU830, TU833, TU838, TU850
- Process Voltage Supervision: Each of the two isolated channel groups incorporates a process voltage supervision input. If the external 24 V process power loop fails or drops, a channel error signal is immediately broadcasted via the ModuleBus for quick diagnostic troubleshooting.
- Robust Signal Protection: Every channel features current-limiting hardware, built-in Electro-Magnetic Compatibility (EMC) protection components, an optical isolation barrier, and an active status indication LED.
Brand New ABB 3BSE008508R1 DI810 PLC Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Channels: Supports up to 8 isolated channels of field signals (configured via 2 x 8 signal terminals).
- Voltage Rating: Maximum rated voltage of 250 V.
- Current Rating: Maximum rated current of 3 A per channel (up to 10 A maximum total current).
- Process Connections: 16 total connection points.
- Mounting: Standard DIN rail mounting. Includes a robust latching device that locks the MTU to the rail to establish functional grounding.
- Physical Protection: IP20 rating.
- Weight: Base weight of approximately 0.2 kg (0.44 lbs).
- ModuleBus Routing: The TU831V1 automatically distributes the ModuleBus to the docked I/O module and bridges it forward to the next adjacent MTU.
- Automatic Shifting/Addressing: It generates correct addressing for the active I/O module by structurally shifting outgoing position signals to the next MTU downstream.
- Mechanical Keying: Features built-in hardware slots to prevent the accidental insertion of an incompatible I/O module, shielding the system from wiring misalignments.
Brand New ABB 3BSE013235R1 TU831V1 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Processor & RAM: Embedded processor supported by 256 MB DDR SDRAM.
- Storage/Boot: 1 GB Compact Flash Memory pre-loaded with the ABB boot image.
- Power Input: 24V DC.
- Physical Form Factor: A bare system board configured without the complete enveloping metal case, weighing approximately 0.76 kg (1.68 lbs).
- PWR: Green (Power input confirmation)
- IDE: Yellow (Drive flash storage activity)
- STATUS: Red/Green alternating (System status/Fault checking)
- Ethernet Ports: 3 Dedicated channels (Drive system connection, Service laptop access, and FPU interface)
- Serial Communication: RS-485 interfaces + COM1 serial port
- Expansion/Peripherals: Dual USB ports
Brand New ABB 3HAC025097-001 DSQC639 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Component Type: Local I/O Digital Base Module
- Digital Inputs: 16 Digital Inputs (24 VDC)
- Digital Outputs: 16 Digital Outputs (24 VDC)
- Communication Protocol: Native EtherNet/IP (No extra software option license needed)
- Dimensions: 75 mm × 36 mm × 101 mm (L × W × H)
- Weight: ~0.12 kg (120 grams)
- Mounting: DIN rail standard (via bracket 3HAC062073-001)
- Daisy-Chaining Capabilities: The modular baseline architecture allows engineers to daisy-chain up to four extension modules directly to this base block. Compatible modules include the DSQC1031 (Digital Add-on), DSQC1032 (Analog Add-on), and DSQC1033 (Relay Add-on).
- Wiring Criticality: The unit communicates over standard native EtherNet/IP. When wiring your cabinet layout (e.g., standard C30 or V20 cabinet footprints), ensure that the target I/O signal power loop is fully closed and active; otherwise, the main robot processor will fail to successfully scan the bus layout. If scanning drops, a hardware master reset button is located directly on the face of the DSQC1030.
- SKU: DSQC1030 3HAC058663-001. Manufacturer: ABB. Product No.: DSQC1030 3HAC058663-001. Condition:In stock. Product Type: Digital I…
Brand New ABB 3HAC058663-001 DSQC1030 Signal Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- ABB Type Designation: DSQC1030 Local I/O Digital Base
- I/O Capacity: 16 Digital Inputs / 16 Digital Outputs
- Communication Protocol: Native EtherNet/IP protocol support (daisy-chainable up to 4 modules)
- Input Voltage: 24 VDC
- Weight: ~0.12 kg to 0.19 kg
- Country of Origin: Sweden
- Required Accessories: Shipped without connectors. Connector set 3HAC060919-001 must be purchased separately.
- Daisy Chaining: Because the module features native EtherNet/IP architecture, you can expand your workspace I/O by daisy-chaining up to four total DSQC1030 modules without needing extra licensing for basic communication.
- Mounting: The unit interfaces directly onto a standard DIN bracket (ABB support part 3HAC062073-001) inside your drive module or controller cabinet.
Brand New ABB 3HAC058663-001 Signal Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Brand: ABB
- Model Number: DSQC3060
- Product Type: FlexPendant / Teach Pendant
- Product Net Weight: 1.5 kg (approx. 3.3 lbs)
- Gross Weight: 2.0 kg (approx. 4.4 lbs)
- Primary Interface Components: Color touch screen, emergency stop button, enabling device (deadman switch), multi-axis joystick
- Joystick Assembly: The precise multi-axis joystick assembly can also be isolated and replaced under independent component sourcing if mechanical drift occurs during long-term manual robot programming cycles.
Brand New ABB 3HAC064211-001 DSQC3060 Signal Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Number of Channels: 8 channels
- Resolution: 12-bit
- Full-Scale Error: 0.1%
- Temperature Drift: Typical 30 ppm/°C, Maximum 50 ppm/°C
- Maximum Field Cable Length: 600 meters (656 yards)
- Protocol Support: No HART capabilities, no SOE (Sequence of Events) timing, and no built-in module redundancy.
- Power Dissipation: 3.8 W
- Current Consumption: 70 mA (+5 V) / 200 mA (+24 V)
- Isolation: 50 V rated / 500 V a.c. test
- Protection: Short-circuit proof; OSP (Output Status Retention) on timeout.
Brand New ABB AO801 3BSE020514R1 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Channels: 8 digital inputs, individually galvanic isolated
- Input Signal Thresholds: "0" Signal: 0–50 V a.c., 0–40 V d.c.
- Input Impedance: 21 kΩ (a.c.) / 134 kΩ (d.c.)
- Filtering & Delays: 6 ms analog filter; Selectable digital filter times (2, 4, 8, 16 ms)
- Analog Filter On/Off Delay: 5 / 28 ms
- Power Dissipation: Typically 2.8 W
- Modulebus Consumption: 50 mA @ +5 V Modulebus; 0 mA @ +24 V
- Max Cable Length: 200 m / 218.7 yds (a.c.), 600 m / 656.1 yds (d.c.)
- Physical Weight: 0.2 kg / 0.44 lbs
- Individual Galvanic Isolation: Every input channel is isolated from the others, providing superior fault isolation and protection for your central control hardware.
Brand New ABB DI821 3BSE008550R1 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Network Protocol: EtherNet/IP (supports both standard ABB drives profiles and ODVA AC/DC drives profiles).
- Physical Interface: Two RJ-45 Ethernet ports utilizing twisted-pair media.
- Network Topologies: Supports Star, Daisy Chain, and Ring topologies.
- Enclosure Rating: IP20 / NEMA 1 equivalent (designed for indoor/cabinet installation).
- Embedded Switch for DLR: Features an integrated network switch that natively supports Device Level Ring (DLR). This allows you to construct a redundant, fault-tolerant Ethernet ring network without purchasing or installing an expensive external DLR switch.
- Rockwell/Allen-Bradley Ecosystem Optimization: Highly optimized for easy integration into Rockwell Automation environments (Studio 5000/Logix platforms) using downloadable Add-On Instructions (AOI) and electronic data sheets (EDS).
- Drive Composer Pro Support: Fully compatible with ABB's PC-based Drive Composer Pro Software, allowing commissioning engineers to perform startup, configuration, and monitoring directly over the Ethernet network.
- Primary Protocols: EtherNet/IP exclusively
- Hardware Performance: Modern chipset, optimized Requested Packet Interval (RPI) processing
Brand New ABB FEIP-21 Module. In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Analog Inputs: 8 differential, independently configurable channels supporting both voltage and current signals.
- Voltage: ±15V, ±10V, ±5V, ±1V, ±500mV, ±150mV, 0–15V, 0–10V, 0–5V, 0–1V, 0–500mV, 0–150mV.
- Current: ±20 mA, 4–20 mA, 0–20 mA.
- Communication Interfaces: RS-485 and Micro USB.
- Supported Protocols: Modbus/RTU and ASCII commands.
- Resolution & Sampling: 16-bit resolution with a combined sampling rate of 100 samples/second.
- Isolation Protection: 3,000 VDC electrical isolation.
- Noise & Surge Immunity: 4 kV surge protection (power), 4 kV Electrical Fast Transient (EFT), and 8 kV Electrostatic Discharge (ESD) protection.
- Power Supply: Accepts a wide unregulated input voltage range from 10 to 48 VDC.
- Operating Temperature: Built for extreme environments, operating between -40°C and 85°C (-40°F to 185°F).
Brand New ADVANTECH ADAM-4117 Analog Input Module (ADAM-4000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- I/O Distribution: 12-channel Digital Input (DI), 2-channel Digital Output (DO), 2-channel Counter
- Power Requirements: 10 to 30 VDC input range (2W @ 24V DC typical consumption)
- Isolation Protection: 2,000 VDC galvanic isolation voltage
- Physical Interfaces: 1 x RJ45 LAN port, 1 x 13-pin plug-in terminal, 1 x 9-pin plug-in terminal
- Operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Digital Input Channels: Features 12 isolated channels supporting both dry contacts (Logic 0: close to GND, Logic 1: open) and wet contacts (Logic 0: 0~3 VDC, Logic 1: 10~30 VDC).
- Counter & Frequency Modes: The 2 counter channels can process inputs up to 4.5 kHz. They can store or discard values upon system power-off and track frequencies from 0.2 Hz to 4500 Hz.
- Digital Output Channels: 2 sink-type channels supporting up to 30 VDC and a maximum load of 100 mA per channel. They natively support 5 kHz pulse outputs.
- Protocol Diversity: Integrates with common SCADA and IoT software through Modbus/TCP, MQTT (with TLS encryption), SNMP, RESTful APIs, UDP, and ASCII commands.
- Edge Intelligence: Employs Peer-to-Peer behavior to link I/O channels across networks without an intervening PLC, alongside a built-in web server for XML and HTML5 dashboards.
- Features Include: Input Voltage: 10~30 VDC; Output Voltage: 0~30 VDC; Sink Current: 100 mA max./channel; Connectors: 1 x RJ45, 1 x…
Brand New ADVANTECH ADAM-6051 Ethernet Digital I/O Module (ADAM-6000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Digital Inputs: 6 isolated channels supporting dry contacts (logic 0: close to GND, logic 1: open) and wet contacts (logic 1: 10~30 VDC).
- Relay Outputs: 6 Form A power relay channels rated for heavy-duty switching up to 3 A @ 30 VDC and 5 A @ 250 VAC.
- Counter/Encoder: Built-in counter capability with a maximum input frequency of 3 kHz.
- Protocols: Native support for Modbus/TCP, MQTT, SNMP, HTTP, UDP, TCP/IP, and ASCII commands.
- Isolation Protection: 2,000 VDC isolation voltage to safeguard internal electronics against high-energy field noise.
- Environment: Designed for harsh conditions with a rugged form factor operating between -40°C and 70°C.
- Power Supply: Accepts a wide input voltage range of 10~30 VDC.
Brand New ADVANTECH ADAM-6066 Ethernet Relay Output Module (ADAM-6000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Channels: 15 total channels — 7 digital inputs and 8 digital outputs (Note: Some updated variants like the ADAM-4050-F list an 8 DI / 8 DO configuration).
- Digital Input: Wet contact interface.
- Digital Output: Open-collector transistor switches with a voltage rating of 0 to 30 VDC.
- Communication Interface: RS-485 via 2 x 10-pin plug-in screw terminals.
- Supported Protocols: Modbus/RTU and standard ASCII commands.
- Data Transfer Rate: Up to 115.2 Kbps.
- Power Requirements: 10 to 30 VDC (typical power consumption of 0.18W @ 24 VDC).
- Operating Temperature: -10 to 70 °C (14 to 158 °F).
- Mounting options: DIN-rail or panel mounting.
- Digital Inputs: Primarily used to determine the live state of limit switches, safety switches, or remote digital sensor signals.
Brand New ADVANTECH ADAM-4050 Remote Digital I/O Module (ADAM-4000 Series). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
-
REQUEST A QUOTE
- Signal Conversion: Converts RS-232 to balanced RS-422 or RS-485 signals.
- Electrical Isolation: Features 3,000 VDC isolation protection to safeguard equipment against ground loops and electrical surges.
- Extended Range: Extends data communication signals up to 1.2 km (4,000 feet), well beyond the standard RS-232 limit.
- Baud Rate: Supports transmission speeds from 1200 bps to 115.2 kbps with automatic baud rate detection.
- Physical Connectors: Equipped with 1 x DB9 female connector (RS-232 side) and 1 x 10-pin plug-in screw terminal (RS-422/485 side).
- Power Supply: Operates on an external input voltage of 10 to 30 VDC.
- Mounting Options: Built with a rugged, compact ABS housing designed for standard DIN-rail or panel mounting inside control cabinets.
Brand New ADVANTECH ADAM-4520 RS-232 to RS-422/485 Converter (ADAM-4000). In stock — ships worldwide within 5-10 days.
1-year warranty against manufacturing defects. Contact us for pricing — reply within 24 hours.
